Reddit reviews TP-Link Gigabit SFP module | 1000Base-LX Single-mode Fiber Mini GBIC Module | Plug and Play | LC/UPC interface | Up to 10km distance (TL-SM311LS)
We found 2 Reddit comments about TP-Link Gigabit SFP module | 1000Base-LX Single-mode Fiber Mini GBIC Module | Plug and Play | LC/UPC interface | Up to 10km distance (TL-SM311LS). Here are the top ones, ranked by their Reddit score.
Single-Mode MiniGBIC module, Supports full-duplexWave Length: 1310nm. Data Rate: 1.25Gbps. Port Type: LC/UPCMax. Cable Length: 10km (6.2miles) for 9/125um Single-Mode FiberAlways keep the protective dust plug on the SFP’s optical bores until you are ready to make a connectionCompatible with all SFP ports on TP-Link product including JetStream switches, and media converter MC220LWork with MC210CS with single mode fiber connection
The basic principle of fiber internet is that the ISP runs a strand of cable to your property, usually single mode with a SC
UPCAPC connector.They provide a media converter to give you a gigabit ethernet handoff, usually built into the firewall/wireless access point they give you.
If you want to use your own device you will need one that supports SFP modules and the appropriate module.
http://www.amazon.com/TL-SM311LS-Single-mode-MiniGBIC-interface-distance/dp/B003CFATYW/
Thanks! I'm guessing this is the module?
https://www.amazon.ca/TP-Link-TL-SM311LS-Single-mode-MiniGBIC-interface/dp/B003CFATYW/ref=sr_1_1?ie=UTF8&qid=1498497542&sr=8-1&keywords=SFP+module
With this cable?
https://www.amazon.ca/StarTech-com-Fiber-Optic-Cable-Multimode/dp/B0001Y7GU2/ref=sr_1_6?ie=UTF8&qid=1498497626&sr=8-6&keywords=lc+to+lc+fiber+patch+cable
Because it's FC-AL, from what I understand, I would need two of each, and plug one into one side, and one into the other and loop it back to the server? Or am I misinterpreting what FC-AL is?