Reddit reviews WS2812B RGB LED Strip Light 30 Pixels/M Digital Programmable, Aclorol WS2812B Individually Addressable 16.4ft 150 5050 RGB SMD Pixels Dream Color Black PCB 5V
We found 3 Reddit comments about WS2812B RGB LED Strip Light 30 Pixels/M Digital Programmable, Aclorol WS2812B Individually Addressable 16.4ft 150 5050 RGB SMD Pixels Dream Color Black PCB 5V. Here are the top ones, ranked by their Reddit score.
INDIVIDUALLY ADDRESSABLE. You can control each LED individually! Yes, that's right; this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). WS2812B Led strips are work great with FastLED libraryFULL COLORFUL: 256 brightness display and full 24-bit color display. Each 5050 SMD w/ WS2811 build in can have its own color and brightness. You can control each LED Pixel individually and set it to any color or animation you wantCUTTABLE&CONNECTABLE: This WS2812B Pixel can be cut off without damaging the rest pixels. Each LED strip comes with 3pin JST-SM connectors and can be connected end to end, Maxim base on you controller. So you can DIY for length you want.HOW TO GET IT WORK: First, you will need an output is 5V power supply and controller (Both don’t include). Second, Connect Power and Ground from Power Supply. AND Connect Ground and Control (data) wire to whatever you are driving the string ESP8266 or any controller.SAFETY & EASY INSTALLATION. Work under DC6V, low voltage for human safety, low power consumption, energy-saving, super-bright but running with low temperature. It comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips.
You bought "wrong" strip and wrong halos.
These are standard strips and standard halos, the 12V RGB.
Your EVOLV X case is meant to be used with ADDRESSABLE lighting, so Digital halo this one https://www.amazon.com/Phanteks-Halos-140mm-Digital-PH-FF140DRGBP_BK01/dp/B07BGWLH14
And WS2812B addressable strip like this https://www.amazon.com/Programmable-Aclorol-Individually-Addressable-Raspberry/dp/B07BKNS7DJ
or this (if you want to overpay for Phanteks overpriced strips) https://www.amazon.com/Phanteks-PH-DRGBLED_Combo_01-Digital-Adapter-Compatible/dp/B07C1ZFRWW/
With these, then everything will check out. And you will be able to sync both your case with halo, strip and motherboard.
If you don't want your current purchase to go to waste (or can't return it), you need to purchase this https://www.amazon.com/Phanteks-Adapter-Specified-Control-PH-CB_RGB4P/dp/B01BZIBJAK/ and then you can connect HALO's and strips to your motherboard 4-pin 12V G R B headers but then, they wont sync with case, as case has to be connected separately to ADD_Header (5V data GND).
Check page 22 and 23 of case manual.
I have the Evolv X and Asus Hero Z390 with 2 x HALO just added and WS2812B strip bought from Amazon but not installed yet.
​
Two questions:
If you're thinking of something like https://www.amazon.com/Programmable-Aclorol-Individually-Addressable-Raspberry/dp/B07BKNS7DJ , it wouldn't work with this service since it's not a simple on/off switch -- each light is individually controlled with varying parameters for colors.