Reddit reviews 3M Mold and Lead Paint Removal Respirator, Medium - 6297PA1-A
We found 4 Reddit comments about 3M Mold and Lead Paint Removal Respirator, Medium - 6297PA1-A. Here are the top ones, ranked by their Reddit score.
For workplace/occupational applications onlyProvides at least 95% filtration efficiency against solid and liquid aerosols and is strongly resistant to oilsImportant educational information included with the respiratorNIOSH approved: P100Carbon layer helps reduce the odor of nuisance organic vapors such as certain solvents, degreasers, and resins*Package Contents: one facepiece, one pair replaceable #2097 P100 filters
Those are not particulate filters, they're cheap Chinese facemasks that don't do shit
A proper N100 filter is big, and requires a decent seal with the face, those masks won't filter shit
You need something like this: https://www.amazon.com/3M-Removal-Respirator-Medium-6297PA1/dp/B00063Y25U/
Start with a big hammer, a pry bar, and a pack of contractor bags to dispose of the debris. You'll wanna wear a mold rated respirator, Tyvek coveralls, gloves, and safety glasses for demolition. You'll also wanna make sure everything is well-ventilated and isolate the area as much as possible during demolition with plastic sheeting. For cleanup, you'll want a HEPA filter for the Shop Vac, a gallon of quat sanitizer concentrate, a bucket, and a good mop. Once you've got everything stripped out, you'll want to spray everything down with Concrobium (a garden sprayer is handy for this) and let it dry out. Box fans or blowers will help with this. After that, you can move on to the next part: inspecting for structural damage and finding and repairing the leak.
Being nervous is normal when you're getting into new territory. We've all been there. But you've got this. Focus on one part of the job at a time. Part 1 is demo and cleanup.
Get yourself a respirator
Not OP, but here's one on Amazon that will work dandy.