Reddit reviews ALITOVE 5V 5A AC to DC Power Supply Adapter Converter 5.5x2.1mm Plug AC 100V~240V Input for WS2812B WS2811 SK6812 LED Pixel Strip Light CCTV Camera Security System
We found 3 Reddit comments about ALITOVE 5V 5A AC to DC Power Supply Adapter Converter 5.5x2.1mm Plug AC 100V~240V Input for WS2812B WS2811 SK6812 LED Pixel Strip Light CCTV Camera Security System. Here are the top ones, ranked by their Reddit score.
Input: 100V-240V 50/60Hz; Output: 5V DC up to 5 Amps; Output adaptor jack size: 5.5mm x 2.1mmIt comes with a female DC connector for screwing wires onto it. You can easily connect wires on it without soldering.Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection.Enough 25W output power and 5V stable output voltage will protect your electronic products from destruction.It is perfect for all 5V projects, such as WS2811 2801 WS2812B APA102 SK6812 LED Strip Pixel light, CCTV Camera, Security System, etc.
I didn’t design or write the code for this, just followed the instructions for the Raspberry Pi project created by u/RushShirtKid and explained in this post on r/baseball. Direct link to the instructions here (but wouldn't hurt to at least glance through the r/baseball post for some good info). Would highly recommend if you want to tackle a small, straightforward project!
Edit: some additional info- it doesn't have to just show one game, you can have it cycle through all the games, or cycle through other games only during inning breaks, or customize it a bunch of other ways!
Edit 2:
You'll see in the instructions there are multiple options as far as parts, so it's up to you which direction you want to go. But if you're curious, these are all the parts I used:
Raspberry Pi 3 B+ w/Power Supply
5V Power Supply for the LED Matrix
64x32 RGB LED Matrix, 5mm pitch (see the project instructions for other size options)
Matrix Bonnet (connects LED matrix to the Pi)
You'll also need some kind of display (tv, monitor, etc) that you can connect to the Pi via HDMI for the setup. And a mouse/keyboard that you can connect to the Pi via usb.
I am newbie too! I use very newbie friendly methods. No solder!
https://www.amazon.com/gp/product/B078RT3ZPS/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
I just use one of those every 150 leds. If I am using the 300 led strip, the 60/m for 5m, I use 8amps instead of 5. The connector that comes with the power supply works directly with the led strips from the same company.
Amazon has a Prime-able supply for $9 here that looks like it would fit the 2.5mm jack on the breakout board.
​
I don't have the breakout, and had some 2.1mm jacks lying around, so ended up ordering a 5A, 2.1mm supply for $14 that came with an inline jack from Amazon here.