Reddit Reddit reviews Bernz-O-Matic ST2200T Micro Flame Butane Torch Kit

We found 4 Reddit comments about Bernz-O-Matic ST2200T Micro Flame Butane Torch Kit. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Soldering & Brazing Equipment
Soldering Guns & Irons
Soldering Torches
Welding & Soldering
Bernz-O-Matic ST2200T Micro Flame Butane Torch Kit
The item is Micro Flame Butane Torch Kit 019133/ST2200TUsed for Construction - Concrete & Metal Tools, Soldering/Heat GunsThe product is manufactured in United States
Check price on Amazon

4 Reddit comments about Bernz-O-Matic ST2200T Micro Flame Butane Torch Kit:

u/SirCasey · 2 pointsr/ResinCasting

Some suggestions from my working with Kleer Kote:

  1. It's surprisingly liquid and likes to sneak out of things I thought I had sealed up. Use the heck out of tape (I've been using exterior grade plastic painters tape, but see a lot of aluminum duct tape in other people's projects, need to try that myself!) around the area you're working with an make sure it seals around and into the bumps in wood grain. Glue might help with that, but plan on lots of sanding afterwards.
  2. Make sure you protect whatever is underneath where you are pouring in case it starts to drip, you don't want this stuff in your carpet etc.
  3. It's been mentioned, but make the mold big and pour a bigger area than you want to end up with. It's super easy to work with and sand down with an 80 grit once it's hardened (give it several days to a week cure after the final pour with as big a piece as you're working with though). Once it's sanded, it looks rough, but clears up nicely with either another top clear coat of more epoxy or a poly.
  4. Get a Bernz-O-Matic or similar butane torch to get air bubbles out after each pour. I babysat my pours for a couple hours checking in every 20 minutes or so to use the torch and pop new bubbles that came out of knots and cracks in the wood. All my edges where tape was ended up with a lot of bubbles, but I planned to sand those out anyway. If I had aluminum tape I probably could have used the torch to get more of them out.
  5. What kind of photo luminescent pigment did you get? I highly recommend something like a Triple Glow Powder because it looks awesome in regular light, under a black light, and in total darkness. If it's just glow in the dark powder, those looks that sickly greenish off white that all glow in the dark products tend to look like by default.
  6. I like the sound of the acrylic mold glued to the wood until you're ready to take it off. Might want to see more pics as you're putting it together though to make sure what I'm imagining is the same as what you have in mind?
    I'll shoot you a PM of my current epoxy resin project (not quite ready to share it with the world at large yet :)

    Good luck!
u/elgonado · 2 pointsr/AskReddit

I had one of these too:
http://www.amazon.com/Bernzomatic-Micro-Butane-Soldering-ST2200T/dp/B000PS9TQI/ref=sr_1_1?ie=UTF8&qid=1314194817&sr=8-1

Kind of looks like the smaller one on thinkgeek. The electric one might be ok, but I don't think it will be as fun as the butane plumbing torch.

The bigger one is much better for both weeds and plumbing. I actually burned a hole through the copper elbow I was trying to sweat on (terrible plumbing skills).

My guess is that killing weeds in this manner is so manly that it actually increases your testosterone.

u/averyv · 1 pointr/videos

Put it on a plate, hit it with this http://www.amazon.com/Bernzomatic-Micro-Butane-Soldering-ST2200T/dp/B000PS9TQI

Really not that difficult

u/Beatleslover31 · -1 pointsr/Dynavap

Bernz-O-Matic ST2200T Micro Flame Butane Torch Kit https://www.amazon.ca/dp/B000PS9TQI/ref=cm_sw_r_cp_api_y1zNAbVVN9EY2 this is it here. It took about a week for it to break in ( the lock and for it to fire on every strike. Make sure to use their recommended butane (bernzomatic) this one has a 3 year warranty as well :)