Reddit reviews BIGTREETECH 3D Printer Part SKR V1.3 32bit Control Board Smoothieboard&Marlin Open Source Compatible with Ramps1.4/1.5/1.6 Support A4988/8825/TMC2208/TMC2100 Drivers
We found 4 Reddit comments about BIGTREETECH 3D Printer Part SKR V1.3 32bit Control Board Smoothieboard&Marlin Open Source Compatible with Ramps1.4/1.5/1.6 Support A4988/8825/TMC2208/TMC2100 Drivers. Here are the top ones, ranked by their Reddit score.
32bit main frequency 100MHz ARM level Cortex-M3 series LPC1768 Microprocessor , the performance has been greatly improvedReserved extended port SERVOS of PWM signal to support BL TouchSupport Resume Printing While Power Off,Filament Break,Detection,Automatic Shutdown After Printing and other functionsThe SPI working mode of the TMC2130 driver and the UART working mode driven by the TMC2208, which eliminates complex wiring process and can be used by simple unplugging jumper capSKR V1.3 board has CE Certification to adopt 4-Layer PCB with “Gold deposition technology” which capability is more stable and better heat dissipation
The Melzi board doesn't come with a bootloader so you will need to burn one first. Good news is that it's easy, downside is you will need to buy a couple tools. A $3 Uno board + bread board jumpers worked great for me, wrote a guide on it here if you're interested. You can alternatively use a USBASP or various other tools, but I can't provide much insight on those.
Once you have a bootloader on the board, you can flash your firmware of choice. The stock board uses Repetier firmware, but if you opt to change it, I would go with Marlin. It's the easiest to use, widely supported (installed on almost all modern 3D Printers) and there is tons of information on it. The TH3D Unified firmware claims to work on the Maker Select, although I have never tried it. Just from a brief search, I found this one on Github for the MS V2 and would probably start there myself.
As a personal recommendation, things have come a long ways since the Maker Select was made. If you can find (or design) and adapter bracket, I would just put that money towards a better board which have come way down in price. For $22, you can pick up a 32 bit BIQU SKR 1.3 board, grab whatever drivers you want, and put your firmware of choice on it (no flashing a bootloader needed). Melzi boards are overpriced and flawed, where RAMPS has been a popular "upgrade" for the Maker Select for years, but those are getting rather outdated these days as well.
If you need help, shoot me a message and I will be happy to help with whatever route you decide to go.
This is it, correct?
BIQU 3D Printer Part SKR V1.3 32bit Control Board Smoothieboard&Marlin Open Source Compatible with Ramps1.4/1.5/1.6 Support A4988/8825/TMC2208/TMC2100 Drivers https://www.amazon.com/dp/B07P87J274/ref=cm_sw_r_cp_apa_i_7XgCDbV8GS68K
I'd go smoothieboard (SKR V1.3) with Klipper. All your printer parameters are editable in a text file that lives on a pi, which is running klipper and octoprint. So changing the printer footprint is a single line edit per axis.
Get the SKR V1.3 paired with TMC2208, They have some on Amazon and they came in 2 days. As far as setup, it's *mostly* plug and play but do mind you will have to shave down the endstop connectors to get them to fit the board and change a few things on Marlin, but they're really nice!
Here's where I got mine from:
SKR v1.3: https://www.amazon.com/BIQU-Printer-Smoothieboard-Compatible-Ramps1-4/dp/B07P87J274/ref=sr_1_3?keywords=bigtreetech+skr+v1.3&qid=1563046045&s=gateway&sr=8-3
TMC2208: https://www.amazon.com/TMC2208-Printer-Stepper-Driver-Screwdriver/dp/B07Q2YKDWW/ref=pd_sbs_328_2/139-5611230-5256615?_encoding=UTF8&pd_rd_i=B07LG1MJY2&pd_rd_r=46839a50-a5a4-11e9-9331-ed4485755cdc&pd_rd_w=8MpMP&pd_rd_wg=hSGbK&pf_rd_p=588939de-d3f8-42f1-a3d8-d556eae5797d&pf_rd_r=FY218K82SEYWVPK1BHTA&refRID=FY218K82SEYWVPK1BHTA&th=1
​
Also, here's a good video that Teaching Teach made about installing the SKR on the Ender 3: https://www.youtube.com/watch?v=GNGN2iSQ5j4