Reddit reviews Emgo Flasher Unit 2 Prong 6 Volt for Kawasaki 73-84

EDIT: By the way, mine is not totally stock. It is only made to look stock.
I have so many things I need to tell you about a "first off" kind of thing with the bike. FIRST OFF get new tires and tubes. Your electrical system sucks ass. The 6v wires are shit and any one of your lights will dim the other. Get a 6v "normal light" for your brake light, and make the rest 6v LEDs. Get the aftermarket headlight for the bike on Ebay it's like $45 but it will save you in the long run when you blow out bulbs while testing out your system. http://www.ebay.com/itm/Honda-XL100-XL125-XL175-XL250-XL350-MT125-MT250-Headlight-6-V-Trim-Ring-Case-/361374724763?hash=item54239cb29b:g:eAsAAOSwDk5T9bTT&vxp=mtr
As soon as you buy that, put on a 12v AC voltage regulator on your Yellow headlight wire from your stator https://www.amazon.com/gp/product/B0087PZV5O/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Your little ceramic wire resistor sucks ass and will fall apart as soon as you touch it, so take that shit out of the bike.
After that, you will need a new flasher. for your turn signals.
https://www.amazon.com/gp/product/B003CKJL14/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Now that flasher is a thermal flasher, so with LED bulbs in your turn signal spots it wont flash, so what I did is put LED bulbs on my rear turn signals, and kept the classic bulbs in the front.
When it comes to your engine, don't waste time.
Buy a gasket kit on eBay, and while you are in there change your clutch plates ($35). You WILL 100% need a special tool to do that which is like $8 on Amazon https://www.amazon.com/gp/product/B00CRH18OG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Also all the oil seals on the bike. Check the engine cylinder, piston, and engine head. Replace the valve seals on in the engine head because mine were bad at 7k miles, and spewing out smoke from my exhaust. Most likely you will need to swap the piston rings, and that will cost like $50 but if you want, they sell big bore kits, and STD kits that will replace your whole jug and piston with gaskets etc for not that much more.
Check all your gears, especially your starter gear for signs of missing teeth, or bad gears. If you need any pages out of my Clymer manual, let me know. That book is the best. You will need the wiring diagram! Once I figure out how to post that, I will hook a brotha up.
Now that your engine is in great shape, and is still spitting out smoke (yes mine still is. I think they all do that at this age)
You will want to do some painting. That is your own personal mess to tackle. There are plenty of painters who will give you advice.
Other tips of advice: BikeBandit, and CMSNL are your friends to finding part numbers, then buying the parts on eBay. I have completely disassembled this bike, and the entire engine, completely disassembled is sitting in two plastic tubs in my garage while I wait for a fucking expensive starter gear to come in.
If you have ANY questions on what to buy, or what to do with your restoration. I can give you the name for what parts I used, and where I got them, like my aftermarket carburetor and shit.
Also, when you feel like tackeling the fork seals, hit me up, they are a complete bitch to change, and will take a special set of instructions to tackle without taking them to a shop.
By the way, DON'T TAKE YOUR BIKE TO A SHOP.
I hope the best to you. Maybe one day we will meet up with out bikes at one of the meet up events they have, like the one in Alabama this year!