Reddit reviews Functional Devices RIBU1C Enclosed Pilot Relay, 10 Amp Spdt with 10-30 Vac/Dc/120 Vac Coil
We found 4 Reddit comments about Functional Devices RIBU1C Enclosed Pilot Relay, 10 Amp Spdt with 10-30 Vac/Dc/120 Vac Coil. Here are the top ones, ranked by their Reddit score.
Relay In A Box (RIB)Coil Current: 28 mA @ 120 Vac ;HP @ 120V 1/3 NO, 1/6 NC, HP @ 240V 1/3 NO, 1/6 NCEnclosed Pre-Iwre RelayCoil Voltage Input: 10-30 Vac/dc ; 120 Vac ; 50-60 Hz ; Drop Out = 2.1 Vac / 2.8 Vdc ; Pull In = 9 Vac / 10 Vdc
I added a relay to my doorbell to use as a simple contact. I'm connected to a mimolite, but should work similarly for an alarm contact.
Functional Devices Ribu1C - Rib Relay, Enclosed 10 Amp Spdt https://www.amazon.com/dp/B000LESCI2/ref=cm_sw_r_cp_api_aJ5Fxb515564X
It's just wired in parallel with the existing chime like a second chime. Much more affordable than the elk interface board.
My setup is a little more complex. I'm also using the mimolite to silence the upstairs chime while my wife is sleeping, but here's my setup for reference.
https://m.imgur.com/a/fzUE3
This is the relay I bought when I setup my doorbell sensor last month. It's worked great so far.
https://www.amazon.com/gp/aw/d/B000LESCI2/ref=ya_aw_od_pi?ie=UTF8&psc=1
What you are describing is using one heating system for stage 1 and second system as stage 2. You just need to connect an isolation relay for stage 2. Then configure it as 2 stage heating in ecobee and set the thresholds. An enclosed relay like this one is probably best. Functional Devices RIBU1C Enclosed Pilot Relay, 10 Amp Spdt with 10-30 Vac/Dc/120 Vac Coil https://www.amazon.com/dp/B000LESCI2/ref=cm_sw_r_cp_api_i_KRF2Db7WPP7H5
Thank you so much. I was on and off the phone with ecobee earlier and they couldn't give me a straight answer.
I had already purchased this relay and have it ready to install.
https://www.amazon.com/gp/aw/d/B000LESCI2?psc=1&ref=yo_pop_mb_pd_title
I will give it a shot later this evening. Thanks again.