Reddit reviews HDE 2 Pack IDE/EIDE/PATA Computer to SATA Hard Drive Interface Adapter PC Mac
We found 12 Reddit comments about HDE 2 Pack IDE/EIDE/PATA Computer to SATA Hard Drive Interface Adapter PC Mac. Here are the top ones, ranked by their Reddit score.
Please Note: SATA II/III drives may not be supported, PATA / IDE connections do not support full SATA speed and may result in slower drive read / write timesAdapter allows you to connect newer style SATA drives to older computers that only support PATA / IDE connectionsBoard features one female SATA port, one male PATA port (40-pin IDE compatible) and one 4-pin Molex power connectionAll in one board ports for data and power, no other cables or adapters needed | Plug and play device requires no additional driversPackage Contents: 2x SATA to PATA / IDE Adapters | Connects a SATA hard drive to a computer with a PATA/ATA/IDE/EIDE interface
These two have been confirmed to work by a few people with no issues that I've heard of: Ebay or Amazon
Personally, I use the ebay one. $40 is waaay too much for an adapter. Oh and here's a good 80 pin cable to go with it.
Yea, for a SATA drive to work in the Xbox you need two things: a converter and an 80wire cable.
This is what most of us use as it is quick and reliable.
And this is the cable I get.
The important part is really the adapter as the wrong adapter will cause booting issues and add time to the boot.
First thing's first, confirm that it's not a 1.6 Xbox and if it isn't, remove the clock capacitor immediately. If you don't do this, the Xbox will be destroyed, so there won't even be any point in doing anything further.
To answer your question, you can just swap out the HDD and then boot the console with a HeXEn 2017 disc in the drive and it will setup the HDD. If you're using a SATA HDD (which you should), you'll need an IDE to SATA adapter and you'll need to replace the Xbox's IDE cable with an 80-wire IDE cable.
Also, instead of playing with those discs, install all of your games to the HDD and play them from there. These old DVD drives are failing, so you should use them as little as possible.
[What ive used](https://www.amazon.com/gp/product/B00JVUXMRI/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
)
used this on 6 systems perfectly
This one https://www.amazon.com/gp/product/B00JVUXMRI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Protips:
Here's some cheap, compact SATA/UATA adapters that fit well in the Xbox: https://www.amazon.com/gp/product/B00JVUXMRI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Additionally, you're going to want to get a 80-wire IDE cable to avoid any issues with the install (I usually use a 24-inch one, and attach the opposite end into the mobo and do a folding trick to get it to all line up). Also, on the v1.0-1.5 boxes that I use SATA drives with, I install IND-Bios 5004, as it avoid erroring out when booting up with a SATA drive.
Edit: Sorry! I didn't see the whole "softmod and v1.6" in the original post! My bad, OP!
Good luck!
I've used these, but Startech makes a nice higher quality one
I am using the one mentioned in the above tutorial.
https://smile.amazon.com/gp/product/B00JVUXMRI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1&sa-no-redirect=1
What type of ide cable are you using and what type of adapter?
Use these type of IDE cables
https://www.amazon.com/gp/product/B01MSDD7MA/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
and these types of IDE adapters
https://www.amazon.com/gp/product/B00JVUXMRI/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
and your problems should go away.
You can probably find those cables cheaper, but those are they type you need if you're using a SATA HDD with an IDE adapter.
I typically use thesefor an xbox upgrade.
WD Blue 2TB PC Hard Drive - 5400 RPM
https://www.amazon.com/dp/B07JC1TQ7N/ref=cm_sw_r_cp_apa_i_cKiZDbW5GMPTQ
HDE 2 Pack IDE/EIDE/PATA to SATA adapter
https://www.amazon.com/dp/B00JVUXMRI/ref=cm_sw_r_cp_apa_i_WLiZDbC9A0HJM
CablesOnline 30-inches 40-Pin (80-Wire) Ultra ATA
https://www.amazon.com/dp/B07KRPJ128/ref=cm_sw_r_cp_apa_i_PMiZDb2VR5WHB
I also bought the HDE two pack. My experience has been:
Buy 2TB WD Blue drive. This works and locked successfully, after I got through the adapter issues below, on a 1.1 Xbox.
HEXIN - Freezes drive security (can't lock/unlock), and Chimp can't see it. Might work with an external USB enclosure, but I don't have one to test with. Works fine after you get the drive locked, though I had to use the 40-pin IDE cables for some reason, otherwise I get Error 13.
Startech - Chimp saw this, so I was able to clone my existing drive and lock it, but it refused to start, giving me Error 07 with both the 40- and 80-pin cables.
HDE - Bought these after the Startech didn't work. I don't know if they freeze the drive security like the HEXIN did, but they also give me Error 07 with both cables when trying to start the Xbox.
So to summarize, I had to use the Startech adapter to clone and lock it, and the HEXIN adapter with the 40-pin cable to have it boot.
Also this is the comment someone else referenced containing the link to HDE. Since the Ebay page doesn't exist anymore, people buy the HDE adapters.
@ Mike link: https://www.amazon.com/HDE-Computer-Drive-Interface-Adapter/dp/B00JVUXMRI
the amazon comments dont exactly boost my confidence ;(
"""" EDIT 12/6/15: The device seems to have died. My Xbox was in the middle of an FTP transfer and suddenly stopped. When I restarted the Xbox to retry, the Xbox got an error code 7 (HDD time out), so I disassembled the Xbox to troubleshoot. When I tried the original HDD it worked fine. I tried the HDD in a SATA compatible PC with SeaTools. I ran the SMART and Short Drive Self Tests. Both completed successfully, confirming the drive still works. I tried the converter in a IDE compatible PC with a DVD-RW drive, which previously worked with this. It no longer detected the DVD-RW drive at all. Well, it worked well until it went kaput.""
"""Angelo
1.0 out of 5 starsXBOX SOFTMODDERS BEWARE!
March 17, 2017
Size: Single|Verified Purchase
My board came in an alarming condition. See the pictures for details. Its true what other reviewers have said about recent quality control. You have a very high change of getting an adapter with a shoddy build, random bits of solder, or visible damage. In one photo, you can make out what looks like... hair... on one of the contacts. I figure I could try to clean off the board with some rubbing alcohol, but I decided I wouldn't be comfortable testing it out at all with my brand new hard drive. Other reviewers reported that their hard drives didn't survive such a test and I don't want to make the same mistake. Buy at your own risk""""
""""Bought this to install a SATA HD in my old Original XBOX.
ByShenhuaon October 1, 2013
Verified Purchase
Well it worked at first, then I realized it didn't come with anything to set Master and Slave. It does have 3 holes on it on one side. Top says Master, Middle says nothing. Bottom says Slave. I have no idea what to do there unless solder them in. and connect to the middle on for whichever one I need at that time. It was a pain in the behind to mess with. I eventually got it working by using a wire and tying each end to each hole everytime I had to switch. It worked and the xbox cloned the hard drive to the new 1TB I had, but then when I changed it to Master it would not boot up. The xbox gave error 13 (no dash) I did have the drive locked too. I tried again for a couple days. It just wouldn't work. So After all that time I decided to forget it since it didn't work right for me.
To be fair, this worked fine in my old PC setting up a SATA HDD to test it out in a very old IDE PC.
So I suppose it can serve a purpose just fine, but for me it had issues. The biggest problem is they didnt just put a switch on to set master and slave instead of those silly holes."""
I dont wanna seem like an a-hole nitpicking on these, I dont mind paying more for something thats gonna save me headaches in the long run.
Dont think Sabrent and kingwin make them anymore ;(