Reddit reviews Hosa XVM-110M Right Angle 3.5 mm TRS to XLR3M Microphone Cable, 10 Feet

That's not really going to get you much as far as usable audio goes, and leaves you nothing for a boompole/cables/etc.

I'm guessing your short films have dialogue? The on-camera (which camera are you using?) mic will not work. Sorry, it sounds like absolute shit 90% of the time. You'll want a boompole (which you can make yourself- look online).

You're going to want to buy used. I'll copy-paste a reply I wrote elsewhere:


On the cheap, will exceed your budget though:

Tascam DR-40 or DR-05. You should go for the 40. Built-in mics for ambiance (probably shouldn't use these to get dialogue unless you absolutely have to). Decent recorder, takes AA's, and can be found used for around $150. http://used.guitarcenter.com/usedgear/index.cfm has one for $150, search for "tascam dr40" and it'll pop up. Talk 'em down on the price, too.

I haven't used the DR-05 so I can't vouch for the quality of it's inputs, but at this price you won't be getting class A preamps. It is what it is, but read the reviews and find which cheap recorder is the most usable for this purpose.

Audio-Technica AT835B. It's AA battery-powered so you don't need phantom mic power on your recorder. One used will run you from $1-175 Here's one on ebay for $165 http://www.ebay.com/itm/Audio-Technica-AT835b-Shotgun-Mic-w-clip-windscreen-cable-prior-to-AT8035-/290759720787?pt=LH_DefaultDomain_0&hash=item43b2a13f53

Build a boom pole. There a lot of tutorials on the internet on how to do it for free or cheap, depending on what you have around your house.
Build or buy a shockmount for the mic. A basic shockmount starts at around $30-40.

Buy/acquire/borrow an XLR-1/8" cable. The mic output is XLR female and the input on most recorders in this price range is 1/8" (otherwise known as "headphone jack-sized"). $7-10. Here's one: http://www.amazon.com/Hosa-XVM-110M-Right-Angle-3-5mm/dp/B000K6B2DI/ref=pd_cp_e_1 (if you're booming it you'll want at least a 15' cord)

Headphones. You might have some around. Ideally I'd say borrow or use the best ones you can get. Don't use ones with "super bass" or anything. You want them as flat-sounding as possible.

And finally: do some studying on audio. Practice a lot. And don't forget to clap to sync your audio track and video track for post.

It was the second one. I think I understand what you're saying now.

Would something like this work to just have 1 volume knob or would I be in the same boat as before? Hosa XVM-110M Right Angle 3.5mm TRS to XLR3M 10 Ft https://www.amazon.com/dp/B000K6B2DI/ref=cm_sw_r_awd_A4QNwb330PDSW

Not sure if you ever figured it out but I'm techie and i know a thing or two about audio recording and such. First thing first, what EXACTLY are you having trouble with?

Based on what i see, the issue is you need to convert the signal from the power source to the sound card with something like this adapter.

That would at least get it working, although i have no idea how it would sound because of all of the adapters. Laptops make things difficult sometimes :X

But i'd have no trouble helping you figure it out if you haven't already. Either reply here and PM if you have more issues.

There are a ton of cheap ones, so I guess quality of the cable could cause problems. If you wanted to be 100% sure you could go with an xlr to 3.5mm cable (though that would move the quality to your motherboards sound card), or a cheap mixer like a Behringer q302USB which would guarantee pretty great audio quality.

To be safe with the usb cables, i'd stay away from the sub $10 ones, or definitely go with a mixer or interface. I think the best cheap, but kind of jankey setup, you could go with in your price range is to get a cheap usb sound card and use a 3.5mm to xlr adapter with that. Just keep in mind the setup would probably be better off with a $10 increase to the budget and a proper mixer.

edit: the q302 doesn't have the ability to turn of phantom power, but the q502 is also good. I have used the $13 usb cable that's on amazon before (from neewer i think?) and it worked for my original jankey at2020 setup, so you would probably be good using that too.

As a second mic I can reccomend check out the atr2100, its great and both usb and xlr, so when your budget increases or you want to upgrade your setup you can upgrade to an xlr setup without scrapping your mic.

that Perception120 on Amazon is an XLR plug my camcorder only has a 3.5mm audio jack there is a conversion dongle? If so would that effect the noticeable quality?
http://www.amazon.com/Hosa-XVM-110M-Right-Angle-3-5mm/dp/B000K6B2DI/ref=sr_1_1?ie=UTF8&qid=1415654239&sr=8-1&keywords=xlr+cable+to+3.5mm Something like this? right?

For the JBL LSR305, I obviously know I will not need an amp since they are powered speakers, but I was wondering what the best solution would be to connect them easily to an ipod, computer etc...

I'm imagining a 3.5mm to xlr such as the one listed below, however I am not too sure since I've never had speakers with these types of inputs. Please help me out with the best cost/performance cabling option for these speakers, amazon preferred.

http://www.amazon.com/Hosa-XVM-110M-Right-Angle-3-5mm/dp/B000K6B2DI/

I'm looking to get a QSC amplifier with a built-in crossover. It takes a mono RCA/XLR signal in this configuration. I will be using a phone or chromecast audio as the source. My plan is to use this connector to convert from 3.5mm stereo to XLR mono. Will this work alright? I'm still not entirely certain about balanced/unbalanced loads and I want to make sure that this is a clean stereo -> mono conversion that won't have the channels cancel each other out. Thanks!