Reddit reviews iSaddle CH01B 1/4" Thread Camera Mount Mini Double-Sided Adhesive in Dash Cam Mount Holder - Universal Tripod Permanent Holder Fits Sony/Canon/Ricoh/HP/GoPro/Oculus (M4 M6 Screw Join Ball Included)

Or with 0 screws https://www.amazon.com/iSaddle-Thread-Double-Sided-Adhesive-Universal/dp/B00BPRLNQ2/ref=sr_1_2?s=electronics&ie=UTF8&qid=1503926851&sr=1-2&keywords=1%2F4%22-20+camera+mount

> I can take down easily if I get pulled over.

So the Mobius ($80 USD) comes with a mounting bracket - looks like this. You can attach it via a suction or adhesive mount, and still be easily removable.

> Ideally I'd like something that goes on the dash and uses the cigarette lighter. I don't want to run trim cable around the airbags.

You can mount this one almost anywhere: higher near the review mirror, lower above the dashboard, or hidden with a lens extender . If you hardwire it or not really doesn't matter to if you have to run it around airbags or not. Hiding the wire is pretty common in any setup.


The Mobius is pretty much endlessly modifiable, optional narrow or wide angle lenses, wireless receivers because it is part of the RC/drone world.

Mount ($7.99 USD) + Mini USB cable ($4.76 USD) + Car Charger ($9.99 USD) or purchase a hardwire kit.

https://www.amazon.com/iSaddle-Thread-Double-Sided-Adhesive-Universal/dp/B00BPRLNQ2/

uses 3m tape that sticks forever and dont leave marks.

Fully agreed - I had similar issues until I 'mounted' my 3 sensors a bit higher.

You can just use 3M Velcro strips and either of the mounts from Amazon below:

3M Velcro strips


White stationary mount


Tripod mount


The nice thing about 3M Velcro strips is they hold tight, but are easy to remove when needed without leaving any marks or residue on the wall :)

Here is the one I bought.

These ones are also great if you dont want to drill holes.

https://www.amazon.ca/gp/product/B00BPRLNQ2/ref=oh_aui_detailpage_o08_s01?ie=UTF8&psc=1

I used these man, they work great. Just press them into the walls first as hard as you can. Then screw in the light houses. https://www.amazon.com/gp/product/B00BPRLNQ2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Should have just bought this: iSaddle CH01B 1/4"-20 Thread Camera Mini 3M Double-Sided Adhesive Mount Tripod Holder Universal In Dash Cam Mount Holder https://www.amazon.com/dp/B00BPRLNQ2/ref=cm_sw_r_cp_tai_9lTSzbV9YZW6F

Check these out too, might be a little smaller: https://www.amazon.com/dp/B00BPRLNQ2/ref=twister_B00QSFKGD2?_encoding=UTF8&psc=1

okay, here's the one you have to screw in..
https://www.amazon.com/OdiySurveil-Security-Housing-Bracket-Camera/dp/B00R96X9DS/ref=pd_sbs_107_1?_encoding=UTF8&pd_rd_i=B00R96X9DS&pd_rd_r=QD18FRG94T99E1Q8PKKM&pd_rd_w=i6gCI&pd_rd_wg=ohKIZ&psc=1&refRID=QD18FRG94T99E1Q8PKKM

and here's the one with the adhesive strip...
https://www.amazon.com/iSaddle-Thread-Double-Sided-Adhesive-Universal/dp/B00BPRLNQ2/ref=pd_sbs_63_20?_encoding=UTF8&pd_rd_i=B00BPRLNQ2&pd_rd_r=Q1DBD2A99SR8ZS8TBNR7&pd_rd_w=3xKk2&pd_rd_wg=N5V0U&refRID=Q1DBD2A99SR8ZS8TBNR7&th=1

These have worked well for me. no holes needed in your wall but you might need to touch up the paint when you take them off.
https://www.amazon.com/iSaddle-Thread-Double-Sided-Adhesive-Universal/dp/B00BPRLNQ2/ref=sr_1_1?ie=UTF8&qid=1499349052&sr=8-1&keywords=iSaddle+CH-115

typically people attach a mount to the tripod, and attach the lighthouse to that (I believe). You could also try something like this, though I'm not sure how well it'd hold. https://www.amazon.com/iSaddle-CH-115-Double-Sided-Adhesive-Universal/dp/B00BPRLNQ2/ref=sr_1_17?ie=UTF8&qid=1473991160&sr=8-17

That would of course attach directly to the wall or some surface.

There's a ton of mounts on amazon. Most of them range from $4-$10 It's just a 1/4" x 20 standard camera mount. I used one of these I had left over from my Mobius camera bundle.

I'd get ones you can stick up with command strips (there's a few purpose made 3D printed ones that can be hard to get a hold of, there's also dash cam mounts that use tripod screws you can technically stick up with command strips if you wanted to), rather than ones you drill in. But that's all up to you! :)

Good luck!

Edit: Something like this. It has an adhesive bottom, but from some reviews it's prone to ripping paint off. Just stick the bottom to two command strips and you should be golden! There's also lots of similar models, that's just one of the top amazon results.