Reddit reviews Leviton 80421-W 2-Toggle 1-Decora/GFCI Device Combination Wallplate
We found 3 Reddit comments about Leviton 80421-W 2-Toggle 1-Decora/GFCI Device Combination Wallplate. Here are the top ones, ranked by their Reddit score.
Sleek, contemporary Decora brand stylingAccents any wall covering with a wide selection of colors and finishesSmooth face and rounded edges resist dust accumulationResistant to fading, discoloration, grease, oil, organic solvents, and moisture scratchesDesigned for high dielectric strength and arc resistance
I got 3 gang plates with 1 or 2 smart switches each. I'm sure there are 4 gangs out there as well.
3 gang, 2 smart switches: https://www.amazon.com/gp/product/B075MQ7LPN (previously I bought the leviton, but it was too cheap and it cracked)
3 gang, 1 smart switch: https://www.amazon.com/gp/product/B0015APNOC/
Hope that gives you a starting point to search from.
By regular, you mean the small “toggle” switch instead of the large flat “decora” switch? You can find some switch plates that mix and match between the styles but I’m not sure if you’d find one decora flanked by two toggle. You could always switch the toggles to decora as well to get a uniform look. Alternately, since you’re hard wiring the one you’re replacing with the pico you could push it to one side so it was toggle-toggle-decora like this one
The pico itself and its wall mount can go anywhere you put a decora. Hell, since you’re not hooking it to power you could put it anywhere you want! Here is a pico/wall mount bundle (though it’s actually $5 cheaper to buy them separately since you wouldn’t use the wall plate in this bundle in favor of the combo one above.)
Caseta does require a hub called smart bridge pro to integrate with HA, as it speaks its own proprietary wireless protocol. The “pro” part is important, a normal bridge won’t report the pico button presses you need to listen for. You can find them around $70 on eBay. A better deal, if you want/need a dimmer to use elsewhere in the house, is this starter kit (note the pro bridge) that you can find for $110-130 as the dimmer runs $50. The msrp for this is about $200 (and it’s seldom on amazon)
Lmk if you go this route and I can send you a config snippet to translate the pico presses to turn off/dim/change color on hue lights. It also requires a custom component that you use instead of the built in one (though there’s been talk of merging them). It’s super simple, you just grab it and drop it in the custom component directory.
You need 3 gang plate but since your only going to be using 2 gang. Use this plate, this switch blank. Left switch left alone, center change to switch blank, right smart switch size opening. Sorry, but I didn’t search down the links in light almond or ivory (I can’t tell from the pic which color you have), but this is the concept you need.
Alternatively you could change the left switch to decora style, use a decora switch blank in the middle, and smart switch on the right, with a 3-gang decora plate.
Again sorry that I got you all white link (it was faster) but whichever route you take you’ll be able to get the components in the correct color.