Reddit reviews Morakniv Wood Carving 122 Knife with Laminated Steel Blade (2.4-Inch)
We found 7 Reddit comments about Morakniv Wood Carving 122 Knife with Laminated Steel Blade (2.4-Inch). Here are the top ones, ranked by their Reddit score.
Small woodcarving knife with a thin, tapered, laminated steel bladeOiled birch wood handleOne of a family of precision tools made by Morakniv in Mora, Sweden since 1891Limited lifetime manufacturer's warrantyDimensions: Blade Length: 2.4-inches (60 mm), Blade Thickness: 0.08-inches (2.0 mm), Total Length: 6.7-inches (169 mm), Weight: 1.9 oz. (53g)
My favorite knife by far to whittle with is this one, the Cold Steel Tuff Lite:
http://i.imgur.com/w0PhkOw.jpg
I use it, and the smaller version of it, the Mini Tuff Lite, for most of my carving (full disclosure, I'm a novice wood carver who just enjoys killing time noodling around).
While I generally prefer the inexpensive Cold Steel knives, I do own a dozen or so dedicated carving knives of a wide variety of makers, including some custom knives.
For an inexpensive option in fixed blades I really like the Mora 120 and Mora 122:
http://i.imgur.com/6L0w1lZ.jpg
I do also own some traditional whittlers, but I really haven't ever warmed up to carving with them.
I use the Tuff Lite knives so much that I've got an assortment of them, and have converted some of them to prison-shank style fixed blades by wrapping them heavily for comfort:
http://i.imgur.com/j8pN4Gd.jpg
They're cheap, sturdy and easy to sharpen. I do use a file to break the edges on the blade spine when I get them, but other than that I find them incredible comfortable to carve with. I frequently complete entire projects with nothing but the Tuff Lite (though I do have a collection of gouges and chisels and such as well, I prefer to work with a knife).
http://i.imgur.com/3tbo2Ds.jpg
I'm a big fan of http://www.amazon.com/Morakniv-Carving-Knife-Laminated-2-4-Inch/dp/B004URTI4I/ref=sr_1_7?s=arts-crafts&ie=UTF8&qid=1453580923&sr=1-7&keywords=morakniv for most carving. The shorter blade means the control is closer to your hand, which is good for "not cutting the shit out of yourself". A longer blade would be better for stripping bark and trimming branches, but less for fine work.
Most of those pieces can be carved with a couple of decent knives
Here, I'm going to go against my best advice, but this can be found at Amazon:
Here is a Mora knife that can be used as a roughout knife that can be purchased at Amazon.
While this knife is OK for hacking away large amounts of wood (not my first choice by far), you really need a good detail knife. Here is one I highly recommend.
As far as the strop goes, save you money. A thin piece of leather glued to a 8" x 2" (+ or -) board will work just as well as anything you purchase.
I was in a similar situation to yourself, once, where all I had was one of those yellow snap-off utility knives, and I figured that a rotary knife would work much better. On one hand, yes, a rotary knife does work better, but only on certain leathers, and even then only on long, straight cuts. I do not think it is really possible to do a curved cut with a rotary cutter. Just getting a nice fixed blade knife and keeping it sharp will work much better for you. As others have said, any rather long cuts, such as for making a strap, are best done with a strap cutter, rather than a rotary.
If you're concerned about the self-healing mat, you shouldn't really worry about it. All that the warning about fixed blades really means is that cuts with a fixed blade will not fully heal, compared to those of a rotary. They'll still partially heal, though, so you'll still be better off than if you had just used a non-healing board. I've personally used a number of different self-healing cutting boards over the years, at a number of price points, and even the $10 ones can handle a fixed blade a lot better than the warning would make you think.
Personally, I use a Mora 122 knife. It takes a while to get the hang of sharpening, since it is chisel ground, but it stays sharp for quite a long time. Because of the shape of the blade, it works really well for pretty much any cut, and does quite well around curves, since it is almost like a hawkbill knife. I also quite like that it doesn't curve up at the end, so you're able to start your cut exactly where you want to. When I'm prudent about sharpening and stropping, I can cut through 6-7 oz in one pass, easily.
Mora makes some nice ones.
http://www.amazon.com/Morakniv-Carving-Knife-Laminated-1-9-Inch/dp/B004GATX62
http://www.amazon.com/Morakniv-Carving-Knife-Carbon-Steel/dp/B00343VCCK
http://www.amazon.com/Morakniv-Carving-Knife-Laminated-2-4-Inch/dp/B004URTI4I
Morakniv has a similar one as well: https://www.amazon.ca/gp/aw/d/B004URTI4I/ref=pd_aw_sim_200_13?ie=UTF8&dpID=31Gga046jdL&dpSrc=sims&preST=_AC_UL115_SR115%2C115_&refRID=1X281FHCXH57XZHEGAN1
A friend of mine has this one I believe, and really likes it.
This. What I think I'm seeing is a carving kit assembled to do woodblock print carving (they use linoleum because it's softer and more consistent than wood. carefully cut away negative space, roll with ink, make a woodblock print)
I agree you need a sturdier fixed blade knife if you want to whittle/carve larger things. I really like a flat-edged blade...almost exactly like this one Honestly this knife can do almost anything that a whole set of chisels and v-tools can do, just a little slower. (although a v-tool is awesome for details/lines and chisels can be nice for weird nooks and carving details in hair sometimes)