Reddit reviews Portta 1x4 4 Ports HDMI Powered Splitter Ver 1.3 Certified for Full HD 1080P and 3D Support One Input to Four Outputs Deep Color Audio Real HDMI
We found 8 Reddit comments about Portta 1x4 4 Ports HDMI Powered Splitter Ver 1.3 Certified for Full HD 1080P and 3D Support One Input to Four Outputs Deep Color Audio Real HDMI. Here are the top ones, ranked by their Reddit score.
Display HD video onto 4 HDTVs / monitorsSupport all 3D Blu-rays, TV programs and games: anaglyph (2 colors) and Multiview Video Coding (MVC)Video support: 1080p FullHD, 1080i/720p, with 12-bit deep color, retaining crispy clear imagesAudio support: DTS/DTS-HD, Dolby Digital / Dolby TrueHD, and Linear PCM (LPCM)No downsizing nor conversion, no compromise in quality
You would only be able to use the Shield on one TV at a time but you could use something like this to split the input to the TVs throughout your house. To control the Shield you would have to use to Android TV Remote app.
A cheap but PIA way of doing this would be to get an HDMI splitter and either run HDMI through the house to the other rooms, or use HDMI over ethernet adapters and run cat6 through the house although they require two ethernet cables per HDMI.
Another option would be to get a slingbox and two devices that have the slingplayer app for the other tvs. This is a more expensive option but it would be dead simple/
Generic DK104 PET0104P HDMI Splitter 1x4 Ports 4 Port 1080P v1.3 HDTV 3D HD Audio https://www.amazon.com/dp/B003LMN5N8/ref=cm_sw_r_cp_apa_f4IGAbWNW4WD7
I setup one of these 4 years ago and it's still going strong. We split out Xbox One, 360, and PC stuff throughout a game store and it's been pretty much set it and forget it.
Would this work for a tri monitor set up? As in can I extend the display across all 3 monitors with this? Generic DK104 PET0104P HDMI Splitter 1x4 Ports 4 Port 1080P v1.3 HDTV 3D HD Audio. http://www.amazon.com/Generic-DK104-PET0104P-Splitter-Ports/dp/B003LMN5N8
Why don't you just have whatever is running Plex plug HDMI into a splitter like this? You would just need to run some HDMI, then change the TV's input. Packs of HDMI cabling wouldn't cost that much either. AND if you're worried about your TV's being too far away for the signal, you could try to daisychain them together.
Hello, I have not tried a single switcher with audio extraction, but I have been using these devices in various combinations for my setups which have changed over time -
HDMI audio extraction:
IMAGE® HDMI to HDMI + SPDIF +... https://www.amazon.com/dp/B00HMVMQOS?ref=ppx_pop_mob_ap_share
HDMI multiplexer:
C&E CNE46126 HDMI 5x1 5-Port... https://www.amazon.com/dp/B00I0XPCGQ?ref=ppx_pop_mob_ap_share
HDMI splitter:
Portta PET0104P HDMI Splitter 1x4... https://www.amazon.com/dp/B003LMN5N8?ref=ppx_pop_mob_ap_share
And finally as my audio goes to speakers without volume control built in:
Optical to RCA, Digital to Analog Audio Converter, Optical to Analog Converter with Remote, DAC Converter Support 192KHz/24bit with IR Remote Control, https://www.amazon.com/dp/B07FCKQPGT/ref=cm_sw_r_cp_apap_bb1CR55BuC2uP
These devices work with each other well, and right now, I am using the HDMI audio extraction and optical to rca audio converter to connect my Chromecast to my projector and Bose companion 20 speakers, and it works great!
Hope this is helpful.
Maybe this is what you want. Granted it has four outputs but should still work for you.
I would probably go with integrated video and one of these guys... http://www.amazon.com/HDMI-Splitter-Ports-1080P-Audio/dp/B003LMN5N8/ref=sr_1_8?ie=UTF8&qid=1397709997&sr=8-8&keywords=HDMI+SplitterCheaper than upgrading the graphics card to accommodate 3 HDMI outputsIt was pointed out to me that /u/Crazybutlazyy desired 3 seperate images being displayed instead of the same image on 3 displays.