Reddit reviews SKIL 3540-02 7-Inch Wet Tile Saw
We found 6 Reddit comments about SKIL 3540-02 7-Inch Wet Tile Saw. Here are the top ones, ranked by their Reddit score.
Corrosive resistant stainless steel top supports tiles up to 12 x 12-inchAdjustable rip fence with miter gauge for accurate straight and miter cutsBlade cooling water reservoir to keep blade cool while minimizing dust and debrisBevel cuts tile from 0 to 45 degrees. Cut Material: Stone/MasonryCross Cut Capacity: 7.75-inch Diagonal Cut Capacity: 7.25-inch
Just picked up this through Amazon for $85 and am pretty happy with it. https://www.amazon.com/gp/product/B003HIWR08/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Is this the saw you have? In what way is it insufficient? You can just remove the fence and mark the tile and guide it by hand. You might screw up a couple cuts, but it's going to be far cheaper than getting another saw.
Previous shower area was around 30 years old. Fake marble walls, small wall niche, leaks in the corners and ugly plumbing.
Over the course of 3 weeks (had to go housesit elsewhere - we only have one bathroom), we gutted the old furnishings down to the studs, built a new niche, added backerboard, waterproofing membrane, new tiles, new fixtures, and had the tub re-furbished (by a pro).
If anyone's curious, here's some products we used.
Tile:
http://crossvilleinc.com/products/modern-mythology/
Backerboard:
James Hardie Backer Board
Tile saw:
http://www.amazon.com/SKIL-3540-02-4-2-Amp-7-Inch-Tile/dp/B003HIWR08
Waterproofing membrane:
http://www.homedepot.com/p/Custom-Building-Products-RedGard-1-gal-Waterproofing-and-Crack-Prevention-Membrane-LQWAF1/100169081
Fixtures:
http://www.amazon.com/gp/product/B004NXT3TE/ref=oh_aui_detailpage_o06_s02?ie=UTF8&psc=1
http://www.amazon.com/Re-modeling-Pfister-Shower-Porcelain-Handles/dp/B001EBWG74
We learned as we went with this (also made many mistakes that thankfully aren't too bad on completion). Upon gutting the shower - found a bit of mold growing on the old green board backing material. Was actually better than expected. We also didn't want to swap out the old 2 knob faucet for something newer (required more plumbing work than we wanted) so we ordered a 3 knob version and just used two of the knobs/stems. Works great.
And a ton of knowledge from this incredibly useful YouTube channel.
https://www.youtube.com/user/TileMasterGa
If anyone has any specific questions, please ask.
Tile saw with a glass cutting blade.
http://www.lowes.com/pd_416741-10742-30469_0__?productId=3805957
http://www.amazon.com/SKIL-3540-02-4-2-Amp-7-Inch-Tile/dp/B003HIWR08/ref=sr_1_1?ie=UTF8&qid=1411864336&sr=8-1&keywords=wet+tile+saw
Buy a cheap tile saw.
http://www.amazon.com/Skil-3540-02-4-2-Amp-7-Inch-Tile/dp/B003HIWR08/ref=sr_1_1?ie=UTF8&qid=1313898662&sr=8-1
I don't have a lot of money to throw at this hobby, and going to the local rock club to use their tools isn't appealing to me personally, so I bought this:
https://smile.amazon.com/gp/product/B003HIWR08/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
And used this blade, which I very much recommend.
https://smile.amazon.com/gp/product/B00009YUJT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It's half the thickness of the stock blade, so you waste less material, and it's held up quite well. I don't do a huge amount of cutting, but I've sawn through dozens of fist sized rocks and lots of roughing out cabs, and it's showing no signs of slowing down yet.
One nice thing I've found is that since the diamonds cover the last 1/2" or so of blade, you can use the side of it to do a little seat-of-your-pants cabochon shaping.
All in all, the only real limitation is the size. You're limited to fist sized rocks. Although you can cut a radius as deep as possible, then tap to break it and hope for the best.