Reddit reviews SMAKN(TM) 22-pin (7+15) Sata Male to Female Data and Power Combo Extension Cable - Slimline Sata Extension Cable M/f - 20inch (50cm)
We found 9 Reddit comments about SMAKN(TM) 22-pin (7+15) Sata Male to Female Data and Power Combo Extension Cable - Slimline Sata Extension Cable M/f - 20inch (50cm). Here are the top ones, ranked by their Reddit score.
22-Pin SATA Data and Power Combo Extension Cable.Hassle-free, Great for backplane adapter. Great for a SATA Internal to External extension Usage.Cable Length: 20inch (50cm)Connector Details: 7+15 22-pin SATA male, 7+15 22-pin SATA female.
Time for something like this
https://www.amazon.com/SMAKN-22-pin-Female-Power-Extension/dp/B00L9R3AKA/ref=sr_1_5?ie=UTF8&qid=1517457385&sr=8-5&keywords=sata+cable+with+power
I modified a Seagate Backup Plus 4TB Portable External Hard Drive Link and used a Sata extension cable similar to this Link.
Its passively cooled and I haven't had any problems yet.
http://imgur.com/a/4ix9v
Okay a 15mm 2.5" Drive will fit in the cage? I was wondering that aswell was going to take some measurements but I Have a 3.5" 4tb Drive I tried installing using Sata extenders (https://www.amazon.com/gp/product/B00L9R3AKA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) but the PS4 Pro dosn't have 12+v HDD Support so it would power the HDD(I connected using the Stock 1TB HDD and it mounted and booted up so i knew it was connected to the Sata/Power ports correctly just had to align precisely with a flash light. so i was thinking about Getting these(https://www.amazon.com/gp/product/B00A5323NO/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2S4EXOOJ8Z82D) and (https://www.amazon.com/gp/product/B002P6W8E8/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A1UCLUF7KW7AYG) to mount a 3.5" HDD. Any thoughts?
The PS4 is made to hold 2.5" drives that are 9.5mm thick. If the hard drive you get is thicker than that then it might be worth it to buy the same external housing I bought and this cable. That wire isn't very long so maybe this one would be better, since you don't need a SATA III cable. So, plugging it all in is really easy. The only real problem is finding a place on the plastic cover to cut out a hole so that the wire can run outside the PS4.
I have a better idea.
https://www.amazon.com/gp/product/B00L9R3AKA/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2OCOGC9B25845
https://www.amazon.com/gp/product/B00ZTRXFBA/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
cut a hole in the back of the HDD casing to support the connector, plug the connector in to the ps4. Done.
No fear of mashing in a HDD in to a slot the PS Pro was not designed for. No fear of cooking your HDD as it'll live in a enclosure it was designed for. No fear of cooking your PS4 as, sure you have to run it without the back plate which messes a touch with air flow, BUT that should be more than offset by the fact that you no longer have a heat generating hard drive in the slot.
Done.
I'm ordering this today and will report the results.
Close but it's more like this one https://www.amazon.com/gp/aw/d/B00L9R3AKA/ref=psdcmw_3015394011_t1_B072HJWZ9S but the end is split so I can go directly to the motherboard without an extra cable
Get one that’s usb or get a sata extension and have it set to hotswap and hanging our the bottom of your case. That’s what I do and it’s handy for more than just cd drives
Sadly that won't help for a cable like this one: https://www.amazon.com/SMAKN-22-pin-Female-Power-Extension/dp/B00L9R3AKA
You could certainly crimp another SATA power end on there, but notice how the connector is a single piece...
To accomplish this you would need an entire chassis, as the 3.5” model has a different internal configuration. If you’re creative, you could probably rig something up if you got a 3.5” backplane. If you don’t mind a bit of a mess, you could do what I did with my R410 and buy these extension cables and house the drives in these actively cooled drive enclosures. You’ll also want a sata to molex adapter to power the fan in the enclosure.