Reddit reviews StarTech.com 8 Outlet Horizontal 1U Rack Mount PDU Power Strip for Network Server Racks - Surge Protection - 120V/15A - w/ 6ft Power Cord (RKPW081915), Black
We found 5 Reddit comments about StarTech.com 8 Outlet Horizontal 1U Rack Mount PDU Power Strip for Network Server Racks - Surge Protection - 120V/15A - w/ 6ft Power Cord (RKPW081915), Black. Here are the top ones, ranked by their Reddit score.
The STARTECH.COM advantage: StarTech.com offers a 2-year warranty and free lifetime technical support on this rack PDU and has been the choice of IT professionals and businesses for over 30 yearsPower and charge: This rack mount power strip provides an additional 8 NEMA 5-15 outlets (120V/15A) and features a 6 feet long cord so you can plug your devices in while leaving the rack mobile1U Rack design: Compatible with all 19” server racks 4 inches or deeper, this horizontal-mount power distribution unit fits many network racks and has an integrated 6 feet/1.8 meter power cordFor the IT professional: This IT-grade rackmount PDU features a rugged steel chassis, LED indicators for ground and surge protection, and lets you control the power state with power and reset switchesProtects your equipment: This rack mountable 8-outlet (120V) power strip features a built-in circuit breaker and reset switch, ensuring a dependable performance of your networking equipment
The ERL-3 and ES are pretty good kit, though I have a bit of a bias against the ERL because I've had two of them go TU on me. I will point out that that's a POE switch, and you didn't list POE as a requirement. The non-POE version is quite a bit cheaper.
I have this PDU because I want my cables "inside" the rack, but it looks similar enough. The one thing I hate about it is that the power switch isn't protected in any way--it's WAY too easy to accidentally power off half of your stuff.
Other than that, looks solid.
I have an APC 1500 UPS.
APC Smart-UPS 1500VA UPS Battery Backup with Pure Sine Wave Output Rack-Mount/Tower (SMC1500-2U) https://www.amazon.com/dp/B007ZT2KV6/ref=cm_sw_r_cp_api_Ie38BbXJYPAM3
I got it from dell for less than that because I had a bunch of rewards points from ordering stuff through dell business credit.
I have it mounted on the bottom of my rack because it’s super heavy.
My devices are not plugged into the UPS. They’re plugged into PDU’s which go into the UPS.
I’m using two of these.
StarTech.com Rackmount PDU with 8 Outlets with Surge Protection - 19in Power Distribution Unit - 1U https://www.amazon.com/dp/B0035PS5AE/ref=cm_sw_r_cp_api_4f38BbNGK7QE4
There are 0u ones that mount on the side of the rack as well. They’re more expensive. Those are the least expensive new PDU’s you’ll find.
A few of my customers at work have this UPS.
CyberPower OR500LCDRM1U Smart App LCD UPS System, 500VA/300W, 6 Outlets, AVR, 1U Rackmount https://www.amazon.com/dp/B000XJJN60/ref=cm_sw_r_cp_api_3i38BbR8SWEXS
It’s worked pretty well. It doesn’t have the ability to connect via the network or do any outage management stuff without being directly plugged in via usb. You can purchase an additional card for that. The APC is more advanced and has higher output, but higher cost.
The cyberpower does not have replaceable batteries, which are consumables and will need replaced every few years.
These smaller ones typically power a router, network switch, access point, and perhaps a small office nas device like a netgear readynas 3138.
At work we use these or bigger.
APC SMT2200RM2U 2200VA RM 2U LCD 120V Smart-UPS https://www.amazon.com/dp/B004F09D0O/ref=cm_sw_r_cp_api_Bl38Bb6QQM1W4
They’re super nice. Management card is additional. These require 20 amp circuits and receptacles or higher. You can use the software (webpage) to power cycle a group of outlets. Pretty neat stuff. But you do pay for the neat stuff.
Wow thats neat! I wonder how hard it would be to modify a 1U PDU like this to be like that
Typically on a rack people install a PDU. Ours are vertical and mounted in the back but there are 1u PDU's.
Here is just an example - related products shows different types.
https://www.amazon.com/StarTech-com-19-Inch-Rackmount-Distribution-RKPW081915/dp/B0035PS5AE
By satellites I'm referring to dish satellites that you may want to mount on the exterior of the house for any cable service you want such as DirecTV and similar providers. Here's a picture.
If you wish to have the ability to hot swap the Internet feed to any room at any time, all you need to do is find the coax cable that currently runs into the house. From there, you extend that cable with this coupler only if the cable doesn't reach your preferred central point, and then that goes to the central point. So then all the coaxial cables are heading to the central point, you should always label regardless of how much you think you memorize where each cable heads to. Now you do the same thing, get the coaxial with the ISP feed, put a coupler on it and pick the corresponding coaxial cable the modem will be in and attach it to the coupler. Like I mentioned before, I would recomneed having the modem sit in the central point. It'll have the same outcome as if you were putting it in a room but this just ensures all your equipment is one place and prevents you running longer cables from one point to another because the modem is in one room and the central point is another.
Now for the ethernet wiring, one hole slightly bigger the size of a golf ball should do for coaxial and ethernet. This is an example of a good install. All the cabling goes to one location in the house, the cables are securely punched down to a patch panel which the patch panel is securely mounted on a wall rack. Here's some items that will get you a clean and professional look while not breaking the bank: