Reddit reviews Supco CE441 Zoom Spout Oiler

I'd do the maintenance routine just to be sure it's ready to roll. Details are in the owners manual. Basically, air compressor and blow out the power head. Light oil on the sheaves in the oil holes, any light oil like 3-in-1 will work but I like zoomspout because you can get down to the lower sheaves without having to take the headstock cover off. Graphite lube on all the controls and threaded components, paste wax on the way tubes, table, quill and any other unpainted parts.

It's not critical immediately, but you probably want to wire cup those bottom tubes at some point to get all the rust off and then paste wax to prevent future rusting.

I'd pick up a Penn State shopsmith adapter for the lathe, and then you can use any standard 1x8tpi lathe chuck. The barracuda 2 is a great kit that covers everything you need for small to mid-size turnings and is much more affordable than a nova or oneway chuck. Pick up a tailstock live center or two if you don't have one. While you are at penn state, pick up the shopsmith compatible pen mandrel if you want to try pen turning.

Shopsmith sells the jacob's chuck you need for the drill press. Used ones are a little cheaper on ebay. You might also want a tailstock drill chuck (or a cheaper one from harbor freight) for the lathe, especially if you fancy trying pen turning.

Make sure you have a power coupler or two, you need them for the bandsaw/jointer.

If you need any parts (bearings, belts, switches, etc) for your shopsmith, try Jacob's Repair Shop before you order from the mothership, he sources parts that are cheaper and higher quality than the stock ones.

Edit - Nice Safety Glasses are the first thing to get with a lathe!

It sort of depends on the types of things he wants to make, but a good starter set like this https://www.amazon.com/Turning-Turning-Hardwood-Handles-Ferrules/dp/B07TTFLDLB/ref=sr_1_3_sspa?keywords=wood+lathe+chisel+set&qid=1572720167&sr=8-3-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzMlA1NVQ4TkgzUFFMJmVuY3J5cHRlZElkPUEwNzQ1NDcwMjJIOVY5U0hERTlMRCZlbmNyeXB0ZWRBZElkPUEwMTYzNDM3MTI0R0tSU0hRVk9RMiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

or

https://www.amazon.com/Savannah-7173-Turning-Hardwood-Ferrules/dp/B004MM3MES/ref=sr_1_5?keywords=wood+lathe+chisel+set&qid=1572720167&sr=8-5

will keep him busy for awhile as he finds his style. The real key is to get him a good way to sharpen these chisels. I like to use a 4 sided block or individual plates like these;

https://www.amazon.com/Jewboer-Diamond-Sharpening-Polishing-Whetstone/dp/B0752Q7GQ3/ref=sr_1_3_sspa?crid=2LXHR48U1CLJS&keywords=4+sided+diamond+hone+block&qid=1572720305&sprefix=4+sided+diamond+%2Caps%2C229&sr=8-3-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFNMTBUWkE0MUhXNkcmZW5jcnlwdGVkSWQ9QTAwNDgwNTYzTVFQQVlZQjdEOTdNJmVuY3J5cHRlZEFkSWQ9QTAyMDUwNTEyQzFXSko5N1Y0Sk0md2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

or

https://www.amazon.com/Diamond-Whetstone-6-Inch-Sharpening-Sharpener/dp/B07JVV7JD6/ref=sr_1_6?crid=2LXHR48U1CLJS&keywords=4+sided+diamond+hone+block&qid=1572720305&sprefix=4+sided+diamond+%2Caps%2C229&sr=8-6

Some people like to use a bench grinder for sharpening but in my experience it is a a bit easier to use the honing blocks and stones until you have an idea of what angles you like best. Im terrible about dropping my chisels so I use the 200 grit to fix up dings and generally touch up my chisels with a 400&600 grit stone once a week or every other.

The other often forgotten necessity is oil for the lathe & chisels.I use a light oil on my chisels, lathe accessories like chucks & tapers, the bearings & spindle, and anything else on the machine that spins. The brand I like and have seen in a few different shops is Zoom Spout Oiler https://www.amazon.com/Supco-CE441-Zoom-Spout-Oiler/dp/B00DM8JK2G/ref=sr_1_4?crid=3NI4QXDJATASP&keywords=zoom+spout+oiler&qid=1572720750&sprefix=zoom+spout%2Caps%2C225&sr=8-4

​

For the Lathe Ways & the body of the machine, everything that doesn't get Light oil I use Way Lube.https://www.amazon.com/Mobil-100772-Vactra-No-2-Way/dp/B07B7XZKVF/ref=sr_1_1?keywords=lathe+way+oil&qid=1572720930&sr=8-1

​

Squirt everything spinny down with light oil before and after you use the lathe and you wont have issues with dust & chips gunking everything up. Way lube can go on once a month or whenever you want a fresh shine.

​

You are such a nice girlfriend, He is going to be stoked!! Good luck!!

I used serpentine oil, this one: https://www.amazon.com/Supco-CE441-Zoom-Spout-Oiler/dp/B00DM8JK2G