Reddit reviews Superior Pump 91330 1/3 HP Thermoplastic Submersible Utility Pump with 10-Foot Cord
We found 5 Reddit comments about Superior Pump 91330 1/3 HP Thermoplastic Submersible Utility Pump with 10-Foot Cord. Here are the top ones, ranked by their Reddit score.
1/3 HP Utility pump moves up to 2,400 gallons per hour; pump will lift water up to 25' of vertical heightTough thermoplastic construction; 10' cord length1-1/4 inch NPT discharge for hight capacity pumping; includes 3/4 inch garden hose adapterRemovable suction screen and handles up to 1/8 inch solidsSuperior Pumps are Built to Last, engineered with quality components and are 100% factory testedAmps - 4.1
The longer the hose and chiller, the slower the water will go through. Those small pumps may work but as you can see by other people's comments, it can take up to 30 minutes or even more depending on water temp. In no way am I saying that is bad. It definitely works. If you want it quicker, get a pump like this https://www.amazon.com/gp/product/B000X07GQS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
That pump will chill quicker as it can push the water quicker through the chiller. Jaded recommends 6gpm coming out their chillers. 2gpm even with chilled water is really slow. Again, it may work but it will most likely be pretty slow chilling. $50 is a lot for a chilling pump but I also use it to clean my 3 taps all at once.
Just a thought
What's your boiler wattage? I'm running 2.5 gpm with 85 degree water source on a 5.5 kW burner and haven't had a problem.
https://www.amazon.com/gp/product/B000X07GQS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
>Only thing would be getting larger volumes up to boil temps on the stove
Get one of these: https://www.amazon.com/Precision-Premier-Line-742G-Submersible/dp/B000BDB4UG
>then down to fermentation temps quickly with only an ice bath.
Get one of these: https://www.amazon.com/Superior-Pump-Thermoplastic-Submersible-91250/dp/B000X07GQS/ref=sr_1_4?s=hi&ie=UTF8&qid=1521643823&sr=1-4&keywords=sump%2Bpump&th=1
Place it in the ice bath (I used between 30 and 40 pounds of ice); use it to pump ice water through one of these:
https://www.amazon.com/Stainless-Steel-Wort-Chiller-Fittings/dp/B004XWBRBM
And recirculate the water back into your ice.
With this method, I got ~6+ gallons to a violent boil, and down to pitching temps in about 12 minutes. You can then use that water for cleaning.
The only danger is that your stove may not like the weight of 7+ or - gallons of water on it.
Been happy with this: https://www.amazon.com/dp/B000X07GQS?ref=yo_pop_ma_swf
I would recommend going with something with a higher flow rate than your usual pond pump. I use a submersible utility pump with pretty good results. The flow rates and power of a utility pumps are better suited for pushing water through the 25+ feet length of an IC.