Reddit reviews Swan 0100003 99% Isopropyl Alcohol Antiseptic Solution, 16 oz. (Pack of 12)

Common recommendation is between 10% and 15%. Here's a how to to get that percentage with some of the more common percentage IPA's on the market: https://www.autogeekonline.net/forum/2009-to-2017-how-to-articles-by-mike-phillips/31183-how-mix-ipa-inspecting-correction-results.html

Otherwise you can do what I did and get 99% IPA and dilute it somewhere between 1 to 8 and 1 to 9 or so. It's super cheap, especially considering it makes something like 15 gallons worth of diluted solution.

• For containers I just use 1 pint cheap plastic containers that soups come in or deli give you. I guess you can find a nice piece of Tupperware that is about that size, and a taller one for taller prints. You could probly just ask the Deli guys at a food store for a few empty 1 pint containers + lids.
  
  
  • 2 containers - one with pure IPA and one with clean water. Good lids that won't leak.
    
    
• 91% or 99% IPA for cleaning your build plate / resin vat / scraping tools / desk / etc. and for using in the print wash container. https://www.amazon.com/gp/product/B01ABPUGH0/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1
  
  
• More gloves: https://www.amazon.com/gp/product/B00CF49NJS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 My palm width is about 3.6 inches / 9.2 cm and I bought the XL which fit ok.
  
  
• More paint strainers: https://www.amazon.com/gp/product/B01HQELZ7E/ref=oh_aui_detailpage_o08_s02?ie=UTF8&psc=1
  
  
• Better removal tools: https://www.amazon.com/gp/product/B01A81FXMK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
  
  
• Also get some Xacto knives + extra blades + sand paper sheets in varying grit 300-400 count for smoothing off support marks. https://www.amazon.com/X-Acto-XZ3601-X-ACTO-Knife-Safety/dp/B005KRSWM6/ref=sr_1_6?ie=UTF8&qid=1527015690&sr=8-6&keywords=xacto+blade
  
  Try to find the flexible sand paper sheets that are meant to be hand-used. I found them in Loews 3m brand, this is the exact type of sheets i use: https://www.amazon.com/3M-COMPANY-28320SB-UF4-320G-Sandpaper/dp/B00PPD1CYA/ref=sr_1_7?s=office-products&ie=UTF8&qid=1527015867&sr=8-7&keywords=sandpaper+320+grit+3m
  
  
• Find a source for cheap paper towels. I use the real cheap paper towels that you find in bathrooms, the stuff that's really stiff and crappy. I don't use name brands such as Bounty or whatever because the higher quality kitchen paper towels leave behind bits of cloth dust, which is unwanted for cleaning the resin vat / build plate / LCD screen. You'll also go through shitloads of paper towels and the higher quality towels are a waste of money. https://imgur.com/7XeelfV
  
  
• Get a couple sunglasses cleaning cloths. Not the microfiber cloths with the consistency of a bathroom towel: https://www.amazon.com/dp/B009L77OXE/ref=sspa_dk_detail_4?psc=1&pd_rd_i=B009L77OXE&pd_rd_wg=OcvWJ&pd_rd_r=3AAAFBB1202BXG3K8QN0&pd_rd_w=cwumx That's just an example - you can probly finder cheaper and better sized/quality towels such as: https://www.amazon.com/MagicFiber-Microfiber-Cleaning-Cloths-PACK/dp/B0050R67U0/ref=pd_bxgy_421_img_2?_encoding=UTF8&pd_rd_i=B0050R67U0&pd_rd_r=PR868R09NE2DQCC8NBVQ&pd_rd_w=0uPs5&pd_rd_wg=eAMNx&psc=1&refRID=PR868R09NE2DQCC8NBVQ
  
  I use these cloths on the LCD screen and the resin vat FEP sheet. After cleaning the resin vat FEP sheet and the LCD with paper towels, I give them a nice polish with the cleaning cloth to remove any other smudges or dust. Make sure to have a cloth dedicated to ONLY the LCD screen, as you want the keep the LCD screen pristine and free of dust and smudges.
  
  You'll also want a print curing station to harden the prints once they have been cleaned. I bought:
  
  
• A plastic cookie jar; clear plastic, round: https://www.bedbathandbeyond.com/store/product/oxo-good-grips-reg-3-piece-pop-canister-set/3262796?categoryId=12605
  
  
• UV LED Light Strip: https://www.amazon.com/gp/product/B075ZQZDBR/ref=oh_aui_detailpage_o08_s02?ie=UTF8&psc=1
  
  
• Heavy duty tape, such as duct tape or gorilla tape. I used black gorilla tape.
  
  
• Aluminum Foil
  
  

1. Wrap the LED strip around the plastic container to this effect: https://imgur.com/oB98Qxl . Make sure you wrap so that the power cable connector will be at the bottom of the container. Make sure you secure the beginning and the end of the LED strip to container with a piece of tape.
   
   
2. Wrap the LED'd container with aluminum foil - shiny side facing inward. Lay out a long piece of foil on the floor, shiny side facing up, just enough to cover the container's length once. Secure the beginning of the foil piece with a piece of tape, and then secure the end of the foil. Try to wrap without causing creases in the foil, keeping the foil as shiny and smooth as possible. Make sure your power cable plug in point is popping out and able to be plugged in.
   
   
3. Secure a piece of foil to the base, shiny side facing inward.
   
   
4. Secure a piece of foil to the lid, shiny side inward. Take a piece of tape and make a 2-sticky-sided loop to secure the foil. Make sure the foil is not interfering with the lid's ability to securely close.
   
   
5. Wrap the whole thing with your gorilla or duct tape. Make sure your power cable plug-in point is popping out and able to be plugged in.
   
   

I use 99% isopropyl alcohol:
(https://smile.amazon.com/Swan-0100003-Isopropyl-Antiseptic-Solution/dp/B01ABPUGH0/ref=sr_1_3?ie=UTF8&qid=1483705397&sr=8-3&keywords=99+isopropyl+alcohol)
And epsom salt:
(https://smile.amazon.com/Epsoak-Salt-Magnesium-Sulfate-Resealable/dp/B004N7FE8Y/ref=sr_1_1?s=beauty&rps=1&ie=UTF8&qid=1483705454&sr=1-1-spons&keywords=epsom+salt&refinements=p_85%3A2470955011&psc=1)

If you only smoke trees and not tobacco or any other additives these two things will make your glass look brand new in almost no time. I clean daily as well and to clean my whole rig only takes about 5 minutes since it's just a quick rinse with the isoproply and epsom salt, then a minute under some cool water until you cant smell the isoproply anymore. I also have this brush set dedicated for cleaning my glass:
(https://smile.amazon.com/gp/product/B0115SLLLM/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1)

No reason it should be that expensive. Here it is for about 20 cents an ounce.

https://www.amazon.com/gp/aw/d/B01ABPUGH0/ref=mp_s_a_1_6?ie=UTF8&qid=1506621089&sr=8-6&pi=AC_SX236_SY340_FMwebp_QL65&keywords=isopropyl+alcohol+99&dpPl=1&dpID=31JCSDeqNwL&ref=plSrch

If you don't want to use iso, PBW is a cheap alternative that is environmentally friendly and requires much less shaking.

One pound lasts me about 6 months. Here is an 8 pound container.

https://www.amazon.com/gp/aw/d/B0064O7XRY/ref=mp_s_a_1_3?ie=UTF8&qid=1506621190&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=pbw&dpPl=1&dpID=31o0-TNa6SL&ref=plSrch

Even better: https://www.amazon.com/dp/B01ABPUGH0/ref=cm_sw_r_cp_api_p4PszbKAQYTBV

Unfortunately I won't be close to your area.....

Otherwise I would take your up immidiately.

Think imma just order the 12 pack that $40 on amazon at the moment (never seen a deal this good on 99% SWAN brand too https://www.amazon.com/Swan-0100003-Isopropyl-Antiseptic-Solution/dp/B01ABPUGH0/ref=sr_1_2?ie=UTF8&qid=1499970467&sr=8-2&keywords=99%25+isopropyl

... I knew I should have done this forever ago....