Reddit reviews TISINO 3.5mm TRS Stereo Male to Dual XLR Male Splitter Patch Cable Unbalanced Mini Jack 1/8 to Double XLR Breakout Cable - 5 FT
We found 5 Reddit comments about TISINO 3.5mm TRS Stereo Male to Dual XLR Male Splitter Patch Cable Unbalanced Mini Jack 1/8 to Double XLR Breakout Cable - 5 FT. Here are the top ones, ranked by their Reddit score.
These cables are designed to split a 3.5mm (1/8" aux) balanced / stereo signal into two unbalanced / mono XLR signals (left and right channels). They are ideal for connecting your iPod / iPad / iPhone / PC / Laptop to a Mixer/Speakers or similar.XLR Connector with internal strain relief for rugged reliability, Oxygen-Free Copper (OFC) conductor for enhanced signal clarityResists corrosion and ensures minimal signal loss, Gold-plated 3.5mm connector resist corrosion, provide durability and improve the signal transmission.Fully molded and shielded to prevent EMI/RFI interference.These cables are wired so the Tip/Hot Left Channel on the 3.5mm TRS jack is wired to the "Red" XLR.
First, check to see if the cables are firmly pressed into each connection. A non-firm connection can sometimes cause this phenomenon. If that doesn’t solve it, buy a new cable. If that doesn’t t work, you have faulty monitors. An interface will not likely solve that problem.
Does your cable look like one of these?
https://www.amazon.com/AmazonBasics-3-5mm-2-Male-Adapter-Cable/dp/B01D5H8KO2
https://www.amazon.com/CableCreation-Y-Cable-Splitter-Players-Amplifier/dp/B01JY2IA6A
https://www.amazon.com/TISINO-Stereo-Splitter-Unbalanced-Breakout/dp/B07DMWZPML
If you have to use that device as if it's a soundcard device on the laptop, but wireless, the only way I can think of to do this is with some "network USB hub" gear. This will basically extend your usb cable over your LAN (wired or wifi) to allow your laptop to connect to your SE22 as if the USB cable was plugged into the laptop.
Unfortunately, these are hard to come by these days. Belkin made one that I had very good luck with back in like 2012 (used it for professional applications), but although they are still available on amazon, they are discontinued and YMMV getting it to work with Windows 10. There's also this one which I cannot vouch for and it's a bit expensive. Finally, there are software options which you may be able to wire up with another device of your own; perhaps like a raspberry pi or some such. It might be an adventure in learning!
All of these solutions will require a rock-solid fast wifi connection, probably won't handle any communication breaks well, and will introduce a bit of latency into the equation. If you're just trying to play music for listening, this shouldn't matter. But if you're trying to do sound editing or whatnot, it probably will matter. Again, YMMV.
EDIT: Another thought, if you just want to play music through your 8020's ...why do you even need to use the SE22 at all? Just get yourself like a Chromecast Audio (discontinued, yes, but easy to find) and get yourself one of these cables and plug the chromecast directly into your 8020's.
3.5mm to XLR Adapters exist - I should have added that in my description but I forgot what they were called.
There are several models of Alesis USB powered monitors with varying connectivity options.
For example, the Alesis M1 Active 320 USB Powered Studio Monitors take USB or unbalanced RCA or TS inputs, and provides speaker level signal to the unpowered monitor through a TS connector.
The Alesis M1 Active 520 USB Studio Monitors take a pair of TRS balanced inputs, and provides speaker level signal to the unpowered monitor through a TRS connector.
Information about specific Alesis products is available at https://www.alesis.com. You may wish to refer to the manual of the specific Alesis USB monitors you are considering.
Most powered speakers that take balanced inputs will also take unbalanced inputs through an appropriate cable. There are many cables having one balanced end and one unbalanced end, for example:
https://www.amazon.com/TISINO-Stereo-Splitter-Unbalanced-Breakout/dp/B07DMWZPML/
https://www.amazon.com/Monoprice-Connectors-Shielded-Oxygen-Free-Conductors/dp/B001UJH0XU/
Sounds like you need an audio interface with usb and line in input to work with the laptop and your cell phone. I would go with the interface for the computer. As the USB will send a cleaner signal vs the 3.5mm
Or get a cables like this.
https://www.amazon.com/Hosa-CMP-159-Stereo-Breakout-Cable/dp/B005HGM1D6/ref=sr_1_25?crid=2ZG6HGWDZ4CLF&keywords=audio+interface+with+line+in&qid=1555876216&s=musical-instruments&sprefix=audio+interface+with+lin%2Cmi%2C236&sr=1-25
​
https://www.amazon.com/TISINO-Stereo-Splitter-Unbalanced-Breakout/dp/B07DMWZPML