Reddit reviews TP-Link Gigabit SFP to RJ45 Fiber Media Converter, Fiber to Ethernet Converter 10/100/1000Mbps RJ45 Port to 1000Base-SX Multi-Mode Fiber (MC200CM)

We found 11 Reddit comments about TP-Link Gigabit SFP to RJ45 Fiber Media Converter, Fiber to Ethernet Converter 10/100/1000Mbps RJ45 Port to 1000Base-SX Multi-Mode Fiber (MC200CM). Here are the top ones, ranked by their Reddit score.

TP-Link Gigabit SFP to RJ45 Fiber Media Converter, Fiber to Ethernet Converter 10/100/1000Mbps RJ45 Port to 1000Base-SX Multi-Mode Fiber (MC200CM)

Designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa.Works at 1000Mbps in Full-Duplex mode for both TX port and FX portSupports auto MDI/MDIX for TX port and provides switch configuration of Force/Auto transfer mode for FX portExtends fiber distance up to 550m (1,800feet) using 50/125um Multi-Mode Fiber, 220m(720 feet) using 62.5/125um Multi-Mode FiberEasy-to-view LED indicators provide status to monitor network activity easilyExternal power supply. Wave Length: 850nm. Max Power Consumption: 1.66W.

Check price on Amazon

11 Reddit comments about TP-Link Gigabit SFP to RJ45 Fiber Media Converter, Fiber to Ethernet Converter 10/100/1000Mbps RJ45 Port to 1000Base-SX Multi-Mode Fiber (MC200CM):

u/karmaths · 4 pointsr/HomeNetworking

TP-Link Gigabit Ethernet Media Converter, 1000Mbps RJ45 to 1000M Multi-Mode SC Fiber (MC200CM) https://www.amazon.com/dp/B003AVRLZI/ref=cm_sw_r_cp_apa_i_uC7RDb98XQ22G

Two of those can also do the job.

u/rageaccount373733 · 4 pointsr/HomeNetworking

With regards to the 500ft distance, him wanting bulletproof. Go look at fiber. You can get some gigabit fiber bridges for a few hundred bucks.

Example:
TP-Link Gigabit Ethernet Media Converter, 1000Mbps RJ45 to 1000M Multi-Mode SC Fiber (MC200CM) https://www.amazon.com/dp/B003AVRLZI/

u/zecodere · 2 pointsr/HomeNetworking

https://www.amazon.com/dp/B003AVRLZI/ref=cm_sw_r_other_apa_i_.hi3DbQDW4R5F

u/gusgizmo · 2 pointsr/networking

Options:

Burial rated CAT5e with lightning arrestors, probably around $350 in materials. Budget for a new set of switches every year :P
Fiber, by the time you add the cost of the arrestors and the wire, it's fairly close in pricing.

http://www.discount-low-voltage.com/Cable/OM1-62-5-Preterminated-Fiber-Cables/PT6SC11R

http://www.amazon.com/Fiber-Patch-Panel-Multimode-loaded/dp/B001B1DVE4

http://www.amazon.com/MC200CM-Converter-1000Mbps-multi-mode-mountable/dp/B003AVRLZI/ref=pd_sim_sbs_pc_1?ie=UTF8&amp;refRID=15EQS9BCRPF67R7JSMSV

http://www.monoprice.com/Product?c_id=102&amp;cp_id=10237&amp;cs_id=1023703&amp;p_id=2611&amp;seq=1&amp;format=2
Wireless bridge-- a pair of Nanostation Loco M5's will push close to 100mb/s full-duplex. Super reliable, I have uptimes of multiple years on these units, I have full monitoring and never any issues even at thousands of feet of range. At 150 feet it should be very hard to get it wrong. Probably cheapest at around $160 total.

http://www.amazon.com/Ubiquiti-US-FCC-NSLOCOM5-NanoStation-loco/dp/B004EHSV4W

u/TehEpicSaudiGuy · 1 pointr/HomeNetworking

Yeah, I don't need to change the box. I do need to change the router though. As far as I've been able to tell, it uses an SC connector to connect to the white box. Anything I've been able to find uses 2 connectors vs 1.

Like this:
https://www.amazon.com/TP-Link-Ethernet-Converter-Multi-Mode-MC200CM/dp/B003AVRLZI

u/snowblindswans · 1 pointr/audioengineering

What about something that can take that optical cable in and convert it to gigabit ethernet - and using an ethernet to thunderbolt adapter - i do already own the ethernet adapter.

Edit: I might use the mono headphone jack suggestion - that went over my head. i didn't realize i could send audio in with the TRRS connector - most stuff I was seeing was that the audio in was gone on the new Retina's.

u/ntrlsur · 1 pointr/HomeNetworking

That's exactly right. An adapter like this will work... https://www.amazon.com/TP-Link-Ethernet-Converter-Multi-Mode-MC200CM/dp/B003AVRLZI/ref=pd_sbs_469_4?_encoding=UTF8&amp;psc=1&amp;refRID=3QGNXVWWAB3M05R1MEWW

There are cheaper ones and more expensive ones. Just make sure you match up fiber to adapter. Either single or multimode and make sure the fiber and adapter are the same sc or lc.

u/pabloec20 · 1 pointr/networking

Hi, wthat about using two of these? http://www.amazon.com/MC200CM-Converter-1000Mbps-multi-mode-mountable/dp/B003AVRLZI/ref=sr_1_1?s=electronics&amp;ie=UTF8&amp;qid=1453321919&amp;sr=1-1&amp;keywords=fiber+to+ethernet

u/mrsolo · 1 pointr/pcmasterrace

If degradation worries you that much, with extra spending you can do fiber optic. You need two of those plus the cable.

However, they are a bit fragile than ethernet cable. I am not sure fiber can take frat house abuses..

u/ProfessionalHobbyist · 1 pointr/AskElectronics

My guess is that you'll need to do some sort of modulation, but I'm not an expert. I wonder if you could apply software defined radio tools to this problem. I found a few laser-related SDR posts, which were also research related.

https://www.rtl-sdr.com/tag/laser/

I also wonder if you could hack up existing copper<->fiber Ethernet media converter hardware to accomplish this task. Not sure if that would be useful to you.

https://www.amazon.com/dp/B003AVRLZI

Just remember not to look at the fiber/laser with your last remaining good eye!

u/hombre_sabio · 1 pointr/HomeNetworking

Sure. Here are links to an example of all the components you need on Amazon.

Run fiber optic cable through some Innnerduct between houses. Install a multi-mode SC connector on the fiber ends and connect to a fiber to Ethernet media converters. Connect Ethernet patch cables between the media converter an the ISP router on on end and an Ethernet switch on the other end.

router--->ethernet--->media converter--->fiber run--->media converter--->ethernet--->switch