Reddit Reddit reviews TYC 700247 Compatible with HONDA Fit Replacement Blower Assembly

We found 2 Reddit comments about TYC 700247 Compatible with HONDA Fit Replacement Blower Assembly. Here are the top ones, ranked by their Reddit score.

Automotive
Replacement Parts
Automotive Replacement Air Conditioning Products
Automotive Replacement Engine Cooling & Climate Control
TYC 700247 Compatible with HONDA Fit Replacement Blower Assembly
TYC 700247 BLOWER ASSEMBLY (700247)
Check price on Amazon

2 Reddit comments about TYC 700247 Compatible with HONDA Fit Replacement Blower Assembly:

u/BipedalCoffeeFilter · 1 pointr/hondafit

Had the same problem this spring. Did some digging and there are tons of other Fit owners with the same problem that almost universally cited the blower motor and/or blower motor resistor. Dealership quoted me $450 for the repair ($250 parts, $200 labor). Ended up replacing both myself for about $65. The whole process took about 15 minutes.

It is not a remotely complicated repair, but both parts are located in an awkward place if you aren't a tiny person. They're both accessed by removing the tiny panel under the glove box or the box itself. Only ONE tool is required, which is a Philips head screwdriver, but I'd recommend using one with a very short handle to get at the resistor's screws (mine was about 2.5-3" long).

Blower Motor on Amazon

Resistor on Amazon

Was very glad to get my AC back in time for summer without dumping an unnecessary $390!

u/spline9 · 1 pointr/hondafit

You're, correct that this isn't related to the A/C. It's just the cabin air system and it's an easy repair. It's mounted under the dash (passenger side). The only difficult part is that its slightly awkward to reach. If you push the seat as far back as it goes and lay on your back (half your body out of the car), it makes it easier to do. Should take about 10-15 mins to do. 5 mins if you've done it before.

/u/civicjohn is also correct. Here is the part you need:
amazon link. The highest speed is a direct passthrough with no resistance. The resistor reduces the power for speeds 1-3 (more resistance/less power for lower speeds). When the built-in fuse in the resistor trips, the fan will only run on the high setting.

If this doesn't work, or the resistor fails again or the air seems to blow weakly, then its the blower motor: amazon link. If the air is weak, then the bearings in the blower motor are bad. This could explain why the resistor blew. Unfortunately the bearings in the blower motor are not serviceable so the blower motor would need to be replaced. The good news is replacing this is just as easy as replacing resistor. Same area, 3 screws.

The resistor is about $20-$25 and the fan motor (aftermarket) is about $55 from Amazon. A Genuine Honda fan motor is really expensive. Something like $450 or in that neighborhood if I'm remembering correctly. If you insist on Genuine Honda factory parts, it's worth checking a junkyard if you have one nearby. BTW, a really short screwdriver is really handy.

Probably more info than you need but if you're like me, I like to know how things work and why they fail. It may also make the repair less daunting for those who may be a little timid about tinkering with their car. Hope this helps.

.

^
the ^blower ^motors ^are ^known ^to ^be ^somewhat ^troublesome.