Reddit reviews UTG Steel Side Rail
We found 8 Reddit comments about UTG Steel Side Rail. Here are the top ones, ranked by their Reddit score.
Optimized to fit both milled or stamped receiversDurable Steel Construction Finished in Matte Black
We found 8 Reddit comments about UTG Steel Side Rail. Here are the top ones, ranked by their Reddit score.
https://www.amazon.com/gp/aw/d/B002GO5WG0/ref=mp_s_a_1_1?ie=UTF8&qid=1518094040&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=utg+ak+side+mount&dpPl=1&dpID=41H8pWwnVpL&ref=plSrch
this is the side rail i got
Short answer: Yes
Reasonably difficult. You would need to remove the gearbox from the gun, mark, drill and tap holes in the receiver, and then screw in a sidemount (possible adhering it with epoxy glue for strength), making sure that the screws didn't interfere with the gearbox. Then you'd have to reassemble the gun correctly. You can buy a RS sidemount, or a cheap airsoft one.
It's not impossible by any means, but it's a big step up from just switching out a handguard. Watch some YouTube videos on airsoft AK disassembly to get a feel for it.
https://www.amazon.com/UTG-AK47-Steel-Dovetail-Plate/dp/B002GO5WG0
Drill holes in side of receiver and bolt it on. Would recommend some red loctite. Then buy the scope mount..
https://www.amazon.com/gp/product/B002GO5WG0/ref=ox_sc_sfl_title_10?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
Here's a link to a side mount plate. Look on youtube for instructions. You drill the receiver. There are also gas tube mounts. Replacing the upper handguard and gas tube with a railed gas tube.
this is the one you have
https://www.amazon.com/UTG-AK47-Steel-Dovetail-Plate/dp/B002GO5WG0
why it has such high review is beyond me. It's known that most mounts won't retain zero with the beveled rear stop surface.
Here's the side plate. I think you'll have to drill and tap the receiver to fit it but I've never really looked into installing one.
You might be better off getting a rail sight replacement to mount an optic.
Not sure if it will fit, but Amazon has one for $8.