Reddit reviews Wago 221-412 LEVER-NUTS 2 Conductor Compact Connectors 10 PK
We found 5 Reddit comments about Wago 221-412 LEVER-NUTS 2 Conductor Compact Connectors 10 PK. Here are the top ones, ranked by their Reddit score.
Connect any combination of solid, stranded, and flexible copper wires faster and more reliablyMinimize space consumption in the junction box by 40% compared to 222 SeriesVisually inspect for proper strip length and complete wire insertion through its transparent housingOperate comfortably and with lower operating forces by using familiar orange leversBag of 10 with instructions card.
I personally prefer these. They also come in varying sizes.
That's your best bet with what's in stock.
However, if you are even slightly handy, you could put together a better, dimmable setup with this board/heatsink and this power supply. To wire it all you would need is this wire and these connectors
If you want to avoid soldering, you just need 2 of these Wago 221 connectors. Black to black, red to red. Mine stays nice and cool, no fuss. Just clip the wires before they terminate into the XT60's and pair them up.
I'd suggest to just cut that cord. Cut it right near the USB part then take another USB cable and cut that one a little bit longer. Strip both cables. You will find 4 wires on each end, strip those too. If you can solder- match the colors and twist them together (red to red, green to green, etc), drop on some solder and cover with heat shrink tubing. If not, use some easy-mode lever nuts and just make sure to match the colors.
Here is another guide with pictures: https://www.techwalla.com/articles/how-to-splice-two-usb-cables-together
If it still seems hard, then just take it to any electronics repair store and I'm sure they can solder on a new USB connector.
6 of these https://www.amazon.com/gp/product/B06XH6WW4D/ref=as_li_tl?ie=UTF8&tag=lega08a-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B06XH6WW4D&linkId=cc59f06fd7893e4174cff95e5f4a7fd0