Reddit reviews Bosch PS21-2A 12V Max 2-Speed Pocket Driver Kit with 2 Batteries, Charger and Case
We found 7 Reddit comments about Bosch PS21-2A 12V Max 2-Speed Pocket Driver Kit with 2 Batteries, Charger and Case. Here are the top ones, ranked by their Reddit score.
Compact: The Bosch PS21 2A 12V Pocket Driver Offers the Shortest Head Length of Its Class at 5.6 Inch Making It the Ideal Driver for Tight Corners and Small Working Spaces; at Only 1.4 Pounds It Reduces User Fatigue for Longer Periods of TimePower: Despite its small size, the PS21 2A driver delivers 265 inch pound of max torque; It offers two speeds, 0 350 RPM and 0 1,300 RPM allowing users to match speed to the applicationControl: With 20+1 clutch setting, the Bosch pocket driver allows users to have more controlEfficient: The PS21 2A is easy to use with a forward and revers switch to help with speedy screw removalConvenient: The PS21 2A driver kit includes 2 12V Max lithium ion batteries, a 12V max charger, 2 1 1/2 in driver bits, and a carrying bag. It also has a built in LED light to help illuminate dark working areas
Yes, Allen/hex keys are retarded to use. You can use a powered screwdriver and a nice one is this:
https://www.amazon.com/Bosch-PS21-2A-2-Speed-Batteries-Charger/dp/B003BEE12U
Add bits, start with the little 1" ones that you use a holder with:
https://www.amazon.com/Titan-Tools-16061-61-Piece-Bit/dp/B002YKBDO6
Get a bit ratchet for real tight spots:
https://www.amazon.com/Neiko-03044A-Ratcheting-Screwdriver-Close-Quarters/dp/B000XYOUS6
Also a tip: with particle board furniture like Ikea's, use a bit of wood glue in the screw hole and on the screw before insertion. It makes it go in easier ;) and also keeps the particles from breaking apart. It doesn't form a permanent bond so disassembly is still easy.
Bosch makes a screwdriver version of the drill from that set - in the screwdriver form factor it has a hex chuck and still has the clutch - that's what you want. PS22 is the brushless version. I think they have a brushed version too. This is still a 2 speed driver. If you want something simpler, but perhaps not quite as small, or if you prefer Milwaukee M12 you can try their single speed screw driver. You might want to be able to try both to get a feel for the modulation of the trigger.
I use this guy, lots of power, not heavy, not too fat if you are working around stuff, I really like it.
Bosch
Edit: I imagine this would be even lighter, but I've never used it.
100% agree. You can get the bosch kit for just a small premium more than the harbor freight kit, and the Bosch is undoubtedly much higher quality.
I personally would splurge for the multi head kit, but that might be a bit too much money for a simple seldom used tool.
Will these be flat TVs, or CRTs?
I only worked on flat screens, my kit:
0, 1, 2 Philips screwdrivers, 5/16" and 1/8" flat screwdrivers, A small 1/4" drive socket set with standard and metric sizes, Nylon spudgers (these are great tools for all sorts of things, buy them by the dozen), A small crescent wrench, Torx drivers T-5 to T-30 (security), Metric and standard hex key sets, Needle nose pliers, Locking hemostat or forceps, 5mm nut driver (for VGA screws)
A small rechargable torque limited driver also makes life WAY easier. I used this one: https://www.amazon.com/Bosch-PS21-2A-12-Volt-Lithium-Ion-Batteries/dp/B003BEE12U/
While I can't provide any input on the products you have listed, I picked up a bosch 12v pocket driver at a pawn shop a few years ago. I can't say enough good things about it. Even tho it was used I have never had a single problem out of it or the drill and impact it came with for that matter. Very strong with 2 different speeds. Batteries charge quick. Feels great in the hand. A fine tool worthy or consideration for sure. http://www.amazon.com/gp/aw/d/B003BEE12U?cache=7b30bc03ac566f4bc333a8334bd29bb2&pi=SX200_QL40&qid=1414192396&sr=8-2#ref=mp_s_a_1_2
I own a Bosch PS21 that I use every day at my job as an apprentice electrician. It has adequate power for everything I have thrown at it. I use it mainly as a driver. It drills quarter inch pilot holes in electrical boxes with no problems.
With the addition of a 4ah battery it will stand up on a flat surface and ride in a J-hook on my tool belt. The battery casings are ABS instead of nylon but so far have survived the inevitable drops.
I am buying a unibit with a 1/4" hex shank soon, not sure if that little drill is up to the task of running it but I will give it a try.
Bosch PS21-2A 12V Max 2-Speed Pocket Driver Kit with 2 Batteries, Charger and Case https://www.amazon.com/dp/B003BEE12U/ref=cm_sw_r_cp_apa_WTj6Bb1AWKPMK
Edit: added amazon link