Reddit Reddit reviews Design Engineering 010127 Titanium Exhaust Heat Wrap with LR Technology, 2" x 50' Roll

We found 5 Reddit comments about Design Engineering 010127 Titanium Exhaust Heat Wrap with LR Technology, 2" x 50' Roll. Here are the top ones, ranked by their Reddit score.

Automotive
Replacement Parts
Automotive Replacement Exhaust Heat Wrap, Matting & Sleeving
Automotive Replacement Emission & Exhaust Products
Design Engineering 010127 Titanium Exhaust Heat Wrap with LR Technology, 2
Fit Type: Universal Fit
Check price on Amazon

5 Reddit comments about Design Engineering 010127 Titanium Exhaust Heat Wrap with LR Technology, 2" x 50' Roll:

u/KnottySean · 4 pointsr/Harley

I wouldn’t say it ALWAYS cracks pipes. Cheaply made pipes wrapped can crack or rust under the wrap when the pipes get wet, and aren’t dried immediately by running the bike. Both my bikes have wrapped pipes, and I haven’t ever had an issue with the pipes failing.

I use this wrap on my bikes: Design Engineering 010127 Titanium Exhaust Heat Wrap with LR Technology, 2" x 50' Roll https://www.amazon.com/dp/B002R4U72I/ref=cm_sw_r_cp_api_i_gs6hDb2DE47FH

The color doesn’t fade, like the black wrap I’ve tried in the past.

u/iusebadlanguage · 3 pointsr/FiestaST

Disclaimer, I've never tracked a ST but I have tracked a WRX and when I was battling high outside temperatures I did a couple of things. First was running distilled water with waterwetter instead of a 50/50 mixture for coolant. I found it did a better job at keeping temps a little lower (monitoring using an Accessport) and just did a coolant flush after every track day to put the Ethylene glycol stuff back in.

Second I upgraded everything I could related to cooling. Radiator, hoses, intercooler, heat wrap, turbo wrap, oil cooler, etc. Anything I found that claimed it could help lower temps I tried. I even drove with the heater on full blast for a session just to see what it did.

Third was just being aware of temps while I was on the track and adjusting my driving if things got too hot. While cooling down my car I would really focus on hitting all my points and not worrying about getting the most speed out of a corner.

u/ejiboo · 2 pointsr/motorcycles

I used VHT flameproof flat black coating on pipes i cleaned with scotch brite and a similar looking, but more stiff wheel thingy for my drill. i wrapped them with this wrap and used these locking ties to keep it together

u/schiddy · 2 pointsr/motorcycles

This header wrap:
https://www.amazon.com/010127-Titanium-Exhaust-Heat-Technology/dp/B002R4U72I

u/wavrunrx · 2 pointsr/guns

i use the factory beaver barf foregrip, and i stuffed the inside of it with i number of layers of this:

https://www.amazon.com/010127-Titanium-Exhaust-Heat-Technology/dp/B002R4U72I

works beautifully.