Reddit reviews Dremel 545 Diamond Wheel
We found 4 Reddit comments about Dremel 545 Diamond Wheel. Here are the top ones, ranked by their Reddit score.
Great for cutting, sawing and carving of hard materials, such as marble, concrete, brick, porcelain, ceramics, hard epoxy and soft and hard wood. Not recommended for metal.Completely coated with fine diamond particles for working with hard materials. The diamond coating adds durability and longevity, while producing smooth & fine cuts. Holes in the face of the wheel keep it cool during use.Application: Cutting (Red color code)1 rotary accessory & 1 402 mandrel includedDremel accessories are also color-coded into usage categories, to make it easier for you to select their application. To find more cutting look for the red color code.USA BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.Technical information: Working Diameter: 7/8"(22.2mm), Blade Thickness: 0.023" (0.6mm) Material: Diamond
and on the end of that flexi shaft
http://www.amazon.com/Dremel-545D-545-Diamond-Wheel/dp/B00004UDI9/ref=sr_1_2?s=hi&ie=UTF8&qid=1368536646&sr=1-2&keywords=diamond+dremel
i used a continuous rim diamond blade in an angle grinder to cut out rectangular holes for the receptacles in my misco wire backsplash in my kitchen. that trickle of cold water is key.
I was thinking about wrapping the bottom of the stem with tape, and trying to use that diamond cutting wheel to make a flat clean cut. Yay or nay?
Tile cutting bit: https://www.amazon.com/Dremel-562-Tile-Cutting-Bit/dp/B00004UDIC
Diamond cutting wheel:https://www.amazon.com/Dremel-545D-545-Diamond-Wheel/dp/B00004UDI9/ref=pd_sim_469_3?_encoding=UTF8&pd_rd_i=B00004UDI9&pd_rd_r=269YAJP4K67TJ18GNAYD&pd_rd_w=t28id&pd_rd_wg=i2XAg&psc=1&refRID=269YAJP4K67TJ18GNAYD
Even carbide burr bits will work (slowly).
Wetting the area will keep down the dust and extend the life of your tools, but isn't strictly necessary.
Use the diamond saw blades, the thinnest is about .1mm thick.
http://www.amazon.com/Dremel-545D-545-Diamond-Wheel/dp/B00004UDI9
There will be some melting and edge cleanup, use a hobby knife and then some fine-grit sandpaper. This is pretty much as clean as you can get.