Reddit reviews Finware 10 Pair Amass XT60H Upgraded Version XT60 Connectors with Covers Male Female Power Plug with Sheath for Lipo Battery RC Planes Cars
We found 1 Reddit comments about Finware 10 Pair Amass XT60H Upgraded Version XT60 Connectors with Covers Male Female Power Plug with Sheath for Lipo Battery RC Planes Cars. Here are the top ones, ranked by their Reddit score.
Genuine Amass 10 Pair XT60H Connectors with Snap on CoversXT-60H Connector for RC Lipo Batteries Drones Airplanes Cars Vehicles60 Amp Current Handling Bullet ConnectorsGold Plated ConnectionsEasy to solder and no heat shrink required
You can drill and nut and bolt the L-Brackets through the floor pan, sure.
A pain to remove the box that way.
Better would be to slip a board under the carpet/liner; bolt that through the floor, and use insert nuts to add threads to the board that you can screw the L-brackets to.
And even better, you can use threaded rivets to screw directly into the metal floor pan
That involves buying another tool, though. There’s a cheaper version at Harbor Freight, but the rivets are soft and somewhat prone to spinning in the hole.
The easiest method overall is to just use a ratchet strap over the top.
....
Always check, double check where you’re drilling; and anytime you drill through painted metal, good to use touch-up paint around the hole or apply some grease to prevent rust.
....
It’d be better to mount the amp separate from the box; and you can use the same strategies to do so.
Add an XT-60 disconnect in-line on the subwoofer cable for easy box removal.
If you do want to put the amp on the box, place it in a corner or along an internal wall where the bracing is stronger.