Reddit reviews Hammond 1591ESBK ABS Project Box Black
We found 13 Reddit comments about Hammond 1591ESBK ABS Project Box Black. Here are the top ones, ranked by their Reddit score.
Price For: Each Enclosure Type: Multipurpose Enclosure Material: Plastic Body Color: Black External Height - Imperial: 7.5" External Height - Metric: 191mm External Width - Imperial: 4.3" IP Rating: IP54 RoHS Compliant: Yes
just do a diy one. they are cheap fun to make and require not software.
all you need is An encoder some buttons and a box to put it all in.
Non-mobile:
^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble.
Yup! I used this enclosure but I would recommend not using LED buttons with it because it creates a cable management nightmare on the inside. Normal buttons should be a lot easier; especially low profile clip in buttons opposed to the screw type. I would opt for getting an enclosure that's a bit bigger but I couldn't find anything that would work after looking for a while.
Amazon, see link below.
http://www.amazon.com/gp/product/B0002BSRIO/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Are you looking for a closed project box ? Or a smaller USB?
After seeing what /u/SgtDwightSchrute1 built the other day, I wanted to give it a go as well! I took most of the parts he used and linked in his thread, but I went with a few more switches as well as a set of POV buttons that have a mode switch to switch them from POV directions to an X-Y axis. The Green button is for the POV mode, and I also moved the Mode LED to the face of the box so you can tell what mode it is in.
I also added some vinyl carbon fiber wrap to give it a nice finish!
Parts links which are the same as /u/SgtDwightSchrute1 for the most part:
Button box: https://www.amazon.com/dp/B0002BSRIO
Control board: https://www.amazon.com/dp/B00UUROWWK
Push buttons: https://www.amazon.com/dp/B00T45I7GQ
Toggle switches: https://www.amazon.com/dp/B0154JY8OA
Carbon Fiber Vinyl Film: https://www.amazon.com/gp/product/B0059XCVVO
The LED is a 5mm Green 18mcd with a holder I had around, but any LED would work, just don't go super bright!
Original inspiration here: https://www.reddit.com/r/hoggit/comments/acn7il/scrutes_cheap_dcs_button_box_diy/?st=JQIL5FJK&sh=c37d0a0a
Here's a list of all the parts.
Project box:
http://www.amazon.com/gp/aw/d/B0002BSRIO
Power Socket Plugs:
http://www.amazon.com/gp/aw/d/B008J80J1A
Power Inlet:
http://www.amazon.com/gp/aw/d/B00917Z96S
Temp Controller:
http://www.amazon.com/gp/aw/d/B00OXPE8U6
I already had some wire and the crimp on connectors.
I ordered a Project box (ABS box) I don't have it all put together yet. I'm waiting on a few more switches to arrive. The box i ordered isn't exactly want i wanted but it was as close as i could get. If you have any ideas for enclosures let me know. Walmart carries a metal clipboard that is like a box also that i think would work good but idk.
Awesome I just finished mine last week. Already got a beer fermenting in the new ferm chamber.
For those asking it looks like the same project box I used http://www.amazon.com/gp/product/B0002BSRIO/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
I found it to be way too small and tight in there. What were your thoughts?
If I build another one I want to build it in a box that would have the STC face and the outlet on the same panel and then be pretty deep for the STC. Similar to the boxes this guy uses. https://www.youtube.com/watch?v=SrdOpk10MkE
If you don't have any design experience, I would suggest just buying a project box. There are all kinds of sizes, colors etc. example below
https://www.amazon.com/gp/aw/d/B0002BSRIO/ref=mp_s_a_1_1?ie=UTF8&qid=1487735355&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=project+box
Ok, almost any 80mm computer fan will work (provided that it has a flat face to it):
http://www.amazon.com/KingWin-Long-Bearing-CF-08LB-Black/dp/B002YFSHPY/ref=sr_1_11?ie=UTF8&qid=1421330687&sr=8-11&keywords=80mm+fan
http://www.amazon.com/Bgears-b-Blaster-80mm-Bearing-Extreme/dp/B0043GQC6S/ref=sr_1_32?ie=UTF8&qid=1421330791&sr=8-32&keywords=80mm+fan
Magnet suggestion:
http://www.amazon.com/Neodymium-Magnets-inch-Disc-N48/dp/B001KV38ES/ref=pd_sim_k_3?ie=UTF8&refRID=100B2PQECYWG45ZYYRMR
Project box:
http://www.amazon.com/Hammond-1591ESBK-ABS-Project-Black/dp/B0002BSRIO/ref=pd_sim_indust_4?ie=UTF8&refRID=1B7JFAHDACTFVK2AZ15M
(Get the ES model, it's bigger, which means more room for your flask)
Switch:
http://www.amazon.com/gp/product/B0002ZPBRA/ref=as_li_ss_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0002ZPBRA&linkCode=as2&tag=socimumb-20
Rheostat:
http://www.amazon.com/gp/product/B009QFU9H4/ref=as_li_ss_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B009QFU9H4&linkCode=as2&tag=brewprof-20
Stirbar:
http://www.amazon.com/gp/product/B001ACNFDQ/ref=as_li_qf_sp_asin_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B001ACNFDQ&linkCode=as2&tag=socimumb-20
Power Supply: (Most people use an old cell phone charger, I used a usb cable, plugged into a modern phone charger)
http://www.amazon.com/PowerLine-90367-Universal-Power-Adapter/dp/B00CWR39TI/ref=dp_ob_title_ce
Toss in some super glue to hold it all together, a couple of nuts and bolts to mount everything with, and that should just about get you there.
Then you can use a USB DAC. The WesionTEK Khadas Tone Board (generic version) would work, it’s just a DAC that doesn’t have a housing (I think fits, you just drill out the 4 holes), it’s really good (If Windows, you need to download the firmware, it’s plug and play with Mac and Linux). To just RCA out from DAC to RCA in on SYS.
Otherwise, the Monoprice Monolith USB DAC would work, you just need 3.5mm to RCA cables to connect to the SYS.
I've used this box in my two builds. It fits all the components
http://www.amazon.com/Hammond-1591ESBK-ABS-Project-Black/dp/B0002BSRIO/ref=sr_1_1?ie=UTF8&qid=1459303304&sr=8-1&keywords=project+box