Reddit reviews Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw with Laser Marker
We found 6 Reddit comments about Hitachi C10FCH2 15-Amp 10-inch Single Bevel Compound Miter Saw with Laser Marker. Here are the top ones, ranked by their Reddit score.
Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.Hitachi's Laser Marker System for increased cutting accuracy15 Amp motor, powerful for the toughest cutting jobs0 52 Degree miter angle range, to the right and left for increased flexibility0 45 Degree bevel angle range, to the left with adjustable bevel stops for precision cutsHorizontal handle with soft, vibration reducing Elastomer grip adds comfort and control. Powerful 1950W maximum output and 1520W power input motorLarge pivoting flip fence, raises 4 inches for cutting crown molding verticallyThumb actuated positive stops, easy to use for quick miter adjustmentsDust collector attachment, to minimize airborne particlesOnly 26.5 pounds to facilitate maneuverability and portability
depends on what diy goals you have in mind. What I find myself using 80+% of the time when I am doing home diy stuff is some combo of the following.....
don't forget yard work
A lot of those above tools stay in a tool bag I carry around, along with stuff like a pencil, markers, drill bit kit, driver kit, zipties and a few other such items.
For basic tools and power tools for the weekend warrior..Harbor Freight is hard to beat.
For good deals on power tools and air tools that are a of better quality...bigskytools.com has great deals on refurbished dewalt, hitachi, bosch and millwaukee tools.
For your stated goals...I would go with a sander, a miter saw, a circular saw, carpenter square, speed square, a 48" level and a 12" level, and some other small tools I mentioned.
Heres a good miter saw. Will handle everything you will need
https://www.amazon.com/Hitachi-C10FCH2-15-Amp-10-inch-Compound/dp/B000NKB3LW
Bigsky runs frequent deals on nailer/compressor combos should you wind up doing lots of trim. And frequently they will have a good 15 amp circular saw for around $50.
Speed Square
https://www.amazon.com/Swanson-S0101-7-inch-Square-Layout/dp/B00002255O
Carpenter / Framing Square
https://www.amazon.com/Tools-Framing-Hi-Contrast-Aluminum-1794447/dp/B005XUHH5S
wood chisel set
https://www.amazon.com/Stanley-16-150-Short-3-Piece-Chisel/dp/B00002X1YO
Demo hammer - This hammer is HEAVY but it will chew through just about anything. If you are gonna be doing demo work I strongly suggest getting one...and a big wrecking/demo bar also
https://www.amazon.com/Jackson-Pulverizer-Concrete-Demolition-Hammer/dp/B002IKM6XO
Heres that 11-in-1 scewdriver. i use this thing 99% of the time I need a manual screwdriver. I bought more just put one in my autos and one at work.
https://www.amazon.com/Milwaukee-Electric-Tool-48-22-2114-Screwdriver/dp/B006WTK436
I know I saved it for last...but don't forget safety gear. Glasses, face shield, gloves and if you are going to be doing dusty work or painting then get some breathing protection.
I would pick up a Hitachi 10" before I ever bought a Ryobi. Not sure it'll last years in a construction environment, but it'll last a damn sight longer than the Ryobi.
I think it's This one.
Do you mean cutting a 90? I would use a chop saw.
If you have a lot of them, and they need to be identical and very accurate, I would use a table saw and a sled.
https://www.amazon.com/gp/aw/d/B000NKB3LW/ref=pd_aw_vtph_0_lp_3?ie=UTF8&psc=1&refRID=RNCB0S04QQ1YDRVCE5XZ
I have the 10" Hitachi miter saw with laser: http://www.amazon.com/Hitachi-C10FCH2-10-Inch-Miter-Laser/dp/B000NKB3LW
I've used it for framing, cutting trim, and hard wood floors. A 12" would be nice but not that necessary IMHO. The only issues I've had with the 10" is doing a 45 degree miter cut on my 6" wide hard wood floors. I had to cut one side then flip it around to finish the cut. Otherwise, it's been great. A 60 tooth diablo blade is a great addition.
I would skip the Harbor Freight tools. If you want a miter saw, you can go with the Hitachi C10FCE2 for $130 new Amazon or $117 from Amazon Warehouse. Or you can get the C10FCH2 for $170 new or $140 Amazon Warehouse.
If you can wait a little bit, you can find the C10FCE2 on sale for $100. I bought mine for that price at Lowes in the middle of June. Amazon had it for the same price at the time.
Of the miter saws you have I would go with the Ryobi 10"; it is better quality than the Harbor Freight tools even if it is not the best quality.