Reddit reviews Leviton 47612-UBK Universal Shelf Bracket used with Structured Media Center, White
We found 3 Reddit comments about Leviton 47612-UBK Universal Shelf Bracket used with Structured Media Center, White. Here are the top ones, ranked by their Reddit score.
Allows security batteries and other products to be mounted inside any Leviton Structured Media CenterVertical and horizontal slots on bracket to accommodate Velcro strips, ensuring vertical and horizontal stabilityComes with four 8 Inch long Velcro stripsMade of white powder-coated 18 gauge sheet metalCome with push-lock pins
The modem and router are held in by one of these:
Leviton 47612-UBK Universal Shelf
These have a standoff/negative space behind them so thats where all the power wires for everything are coiled up. Once you have one of these, you can get some 3/4"x1/16" aluminum bar from Lowes/HD and cut it to length and transfer the spacing for the pushpin holes to it from one of the Leviton shelfs. Drill those out and put some of these in there:
Leviton Push-Lock Pins
I painted mine with white appliance enamel. You can put those wherever you need them and use some velcro cable wraps around both sides of them to secure the devices to the enclosure.
It looks like Leviton actually makes a version of these now:
Leviton Universal Bracket
...but for $23/pr you can do better/stronger if you go the thin aluminum bar route and make about 6/8 of them for about $10, including the Leviton push lock pins.
https://www.amazon.com/Leviton-47615-NYL-Push-Lock-Structured-Centers/dp/B0018DOBG2/ref=pd_sim_60_2?_encoding=UTF8&psc=1&refRID=HAKJKZK4EC0XSH0KE18M
It uses those little black stand off things. You insert it into the hole and then push down on the top and it locks down. If you by Leviton switches/patch panels, they usually come included with it (look at the Leviton switch I linked above, it's attached to the four ends of the switch). And for mounting gear in it that's not made by Leviton, they have special brackets that just hold a device in place and mount using Velcro straps. But save money and just mount it yourself using double sided tape/velcro straps etc...
Here is their universal bracket to mount non-leviton hardware:
https://www.amazon.com/Leviton-47612-UBK-Universal-Bracket-Structured/dp/B0018DKWGA/ref=pd_sim_60_1?_encoding=UTF8&psc=1&refRID=YRPJ81ADVX50J2PK7EAD
Here's another:
https://www.amazon.com/Leviton-47612-DBK-Plastic-Bracket-White/dp/B0007SN5E8/ref=pd_sim_60_4?_encoding=UTF8&psc=1&refRID=66BAHF93TW6PX8GR97RV
Looks like one of these Leviton data brackets:
https://www.amazon.com/dp/B0007SN5E8/ref=cm_sw_r_cp_api_Dp9uzbMH02Y62
Not everything fits the hole pattern so I used this shelf for mine:
https://www.amazon.com/dp/B0018DKWGA/ref=cm_sw_r_cp_api_br9uzbN65X3N1