Reddit reviews Neewer 75"/6 Feet/190CM Photography Light Stands for Relfectors, Softboxes, Lights, Umbrellas, Backgrounds
We found 13 Reddit comments about Neewer 75"/6 Feet/190CM Photography Light Stands for Relfectors, Softboxes, Lights, Umbrellas, Backgrounds. Here are the top ones, ranked by their Reddit score.
This 6.23 feet light stand is constructed from aluminum alloy, giving it exceptional strength for heavy duty workFolded height 25.98 inchesMaximum heigh 74.8 inchesMaximum load capacity 13.5 pounds
I'm very happy with my Godox gear so far. I also considered Yongnuo, but I like Godox' wireless system is a lot better. In fact, I think right now they have one of the best wireless systems on the market.
Basic setup:
A hot-shoe TTL flash is a great place to start. I'd suggest the TT350N for that; it's small and convenient to carry. It's strong enough to light up a dark room, and to overpower ambient lights. If you use it as a bounce flash, you don't really need any other accessories.
I use the TT350 for all the bounce photography. Bounce is very simple and convenient. Its small size is very handy here, because it doesn't throw off the camera balance or really get in the way.
I personally bought the V860II-N as my first speedlight. I realized it was a beast when it arrived; way more flash than I needed on my hot-shoe. Here's a size comparison: http://imgur.com/a/jFpvM
I'm glad I have it though; it's great in multi-point lighting and it's nice to have a more powerful option should I need it.
Off-camera setup:
The next step up from there is to move the flash off-camera. For that, you'll need a stand, a head, and a light modifier.
You can use a tripod, but a light stand is a lot simpler to setup and break-down. To mount a light to the stand, you'll need and either a hot-shoe adapter or the flash foot. The simplest and cheapest modifier is a photography umbrella. You'll need a mount to attach an umbrella to the stand, though most hot-shoe adapters will also hold the umbrella.
I use the Godox S mount adapter and a soft-box. The benefit of the adapter is that it can use other Bowens mount light modifiers if I want to try them in the future. It also holds an umbrella.
You'll also need a way to trigger the flash. You can use your on-board flash for this, but I went with the Godox X1 trigger. This is a radio trigger, and does TTL. It cost $40. A very nice thing about the X1 trigger is that it can control the speedlights remotely; I can change power and other settings from my camera, which cuts down a lot of back-and-forth. It's also a lot more reliable and convenient than using an optical trigger.
Multi-point setup:
The next step after that is multi-point lighting. If you already have a speedlight, radio trigger, etc. All you really need are more flash heads. The nice thing about multi-point lighting is that they don't all need to be the same speedlight. Usually, you use different power levels and modifiers anyway. In my case, I have a big powerful speedlight, and a small portable speedlight. When I'm out and about, I can grab whichever is best for the job.
You can use manual (non-TTL) flashes for multi-point lighting. This is best if you don't intend to use ambient as a light source or don't mind fiddling to balance ambient with the flash. A lot of Godox's manual flashes still have built in wireless support, which makes them a good inexpensive solution.
The sky is the limit:
From there, there's a whole world of lighting. Strobes powerful enough to make the sun look dim, lighting modifiers, etc.
Quick edit: A number of companies resell Godox' products. Flashpoint is the most prolific, but there's also Bolt, Neewer, and a couple others.
Until you can afford some scangrips or similar, you can build these for around $60 each on Amazon.
Stand | Mount | Bulbs
What your looking for is something to cast soft-light on your workspace.
Get one of these:
https://www.amazon.com/Neewer-60cmx60cm-Softbox-Diffuser-Fluorescent/dp/B00LTNKKVG/ref=sr_1_4?s=electronics&ie=UTF8&qid=1511945500&sr=1-4&keywords=soft+light+lamp
Plug in one of these bulbs:
https://www.amazon.com/Bonlux-Daylight-Balanced-Spectrum-Photography/dp/B01EFK7XE6/ref=pd_bxgy_421_img_2?_encoding=UTF8&psc=1&refRID=8X7REXZN8369RAC069WP
And mount it on one of these stands:
https://www.amazon.com/Neewer-Photography-Relfectors-Softboxes-Backgrounds/dp/B00K69A0QY/ref=pd_bxgy_60_img_3?_encoding=UTF8&psc=1&refRID=5ZF30F2MDZM6ZJQBSG0Z
Have it cast light onto your workspace. You can probably find a smaller box and stand. You might even consider getting two of them for better lighting and eliminating shadows from your arm. The lighting will also help you as an artist becuase it casts white-light instead of a warm yellow, which can affect how you see colors at night.
Hi /u/picrh - Here's a great review/tutorial on what you can achieve with a 3 point ring light setup using the Diva Ring Light: http://www.lafcpug.org/reviews/review_diva_ring.html
But instead of Divas, you might want to consider three battery powered F&V R-300s with stands instead.
You can get three [F&V ring lights with soft boxes for $269.99 each at Adorama] (http://www.adorama.com/FVSBBRLR300.html?KBID=66297).
Three ring lights, with 3 stands ([2 for $22] (http://amzn.to/1vjJXtl) and a [single for $15] (http://amzn.to/1tlfUDo)), 3 [$10 Sony FP-batteries] (http://amzn.to/1vjKvQ1) and an [$18.50 dual battery charger] (http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575034783&toolid=10001&campid=5337235943&customid=&icep_item=111315155908&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg) will give you a great 3 point lighting setup for less than $900.
The great thing about the R-300 is that you can put it on your rig with a [$40 rail mount] (http://www.adorama.com/FV15RMR300.html?KBID=66297), as seen here: https://lh4.googleusercontent.com/-rhqiHavOnGM/U1J4paO2vRI/AAAAAAAAIrk/eW1mhniD0gY/w724-h543-no/P1120708.JPG
This is something you cannot do with the Diva.
I have both the Diva and the R-300, and they both put out a lot of cool, even light, but the F&Vs are much more portable (because they are so much smaller) and more flexible (because they can be AC or DC powered). Here's a pic of both lights in my studio: https://lh4.googleusercontent.com/-jrqsQtPN3TU/U1sjz3-jwnI/AAAAAAAAIt4/k2WveyQeO4o/w724-h543-no/P1120732.JPG
Good luck!
Recommend light tripods (as in tripods for lights for photography) for the base stations. Plus mounts to rotate them for each.
Like this
https://www.amazon.com/Neewer-Photography-Relfectors-Softboxes-Backgrounds/dp/B00K69A0QY?keywords=photography+light+tripod&qid=1537408011&sr=8-1&ref=mp_s_a_1_1
And this
https://www.amazon.com/EXMAX-Aluminum-Rotating-Lighter-Camcorder/dp/B012FTXOW4?keywords=rotating+camera+mount+tripod&qid=1537408217&sr=8-2&ref=mp_s_a_1_2
Don’t have these exact products so I can’t vouch for them.
Oh and you may want to consider some cleaning wipes and maybe disposable VR covers. Sweaty headset is gross.
Photography light stands (something like this) might be your best bet. I've used these with the lighthouses in the past for less-permanent VR setups, and just ziptied them to the top. Worked great!
I would highly recommend the Yongnuo external speedlights! You'll also need wireless flash triggers to shoot with your flash off-camera (made for your camera brand) I personally like to shot through a white umbrella for close up portraits. You can find all of this equipment on Amazon :)
Yongnuo Flash: https://www.amazon.com/dp/B00PGTOX26/ref=cm_sw_r_cp_api_B3jizbSQH5JC7
White Umbrella: https://www.amazon.com/dp/B003PEX8XE/ref=cm_sw_r_cp_api_K8jizbZE9WMJ8
Flash Adapter for light stand: https://www.amazon.com/dp/B003TYDBYQ/ref=cm_sw_r_cp_api_m9jizbNDJBSJ6
Light stand: https://www.amazon.com/dp/B00K69A0QY/ref=cm_sw_r_cp_api_79jizb8EEAZAT
I can recommend wirelessly flash triggers too! What brand is your camera?
https://www.amazon.com/Neewer-Photography-Relfectors-Softboxes-Backgrounds/dp/B00K69A0QY/ref=sr_1_1?ie=UTF8&qid=1511134275&sr=8-1&keywords=light+stand
CN-216 $64.99: https://www.amazon.com/gp/aw/d/B010FELA9K/ref=mp_s_a_1_11?ie=UTF8&qid=1511751532&sr=8-11&pi=AC_SX236_SY340_QL65&keywords=neewer+216
Soft box $8.99: https://www.amazon.com/gp/aw/d/B00OXCGA28/ref=mp_s_a_1_7?ie=UTF8&qid=1511751532&sr=8-7&pi=AC_SX236_SY340_QL65&keywords=neewer+216&dpPl=1&dpID=41HFsj%2BBBzL&ref=plSrch
Filters $9.99: https://www.amazon.com/gp/aw/d/B00ZP45V8M/ref=mp_s_a_1_fkmr2_1?ie=UTF8&qid=1511751737&sr=8-1-fkmr2&pi=AC_SX236_SY340_QL65&keywords=neewer+216+filter
Stand $18.99: https://www.amazon.com/gp/aw/d/B00K69A0QY/ref=mp_s_a_1_fkmr1_1?ie=UTF8&qid=1511751838&sr=8-1-fkmr1&pi=AC_SX236_SY340_QL65&keywords=neewer+216+stand
Total: $103
if you're in a controlled environment and starting off but want some flexibility instead of like throw away lights, I'd recommend these. I picked these up before I started working with lighting to start upping the quality of my sets for a reasonable price.
Hopefully this fulfills your needs.
The panels come by themselves so you'd need light stands and batteries/ac adapters.
15W LED panel with controllable WB, brightness, ok diffuser, with excellent build quality and light quality.
https://www.amazon.com/dp/B01M0VDOGX/ref=cm_sw_r_cp_apa_i_WMBACbR8EQH95
These are the stands i use with it
https://www.amazon.com/Neewer-Photography-Relfectors-Softboxes-Backgrounds/dp/B00K69A0QY/ref=pd_aw_sim_421_of_20?_encoding=UTF8&pd_rd_i=B00K69A0QY&pd_rd_r=4d2f8b3c-32ed-11e9-9916-7fe6d01b346e&pd_rd_w=RqPSv&pd_rd_wg=khx5z&pf_rd_p=469620d9-3e90-496d-9dc8-b19f900ba5fe&pf_rd_r=HAKTWDZ21BWGF51HWG43&psc=1&refRID=WC3EXZSZCRPV77880CEX
This a charger/batteries for it
https://www.amazon.com/dp/B07JMFZ9CW/ref=cm_sw_r_cp_apa_i_EWBACbG88NJT0
you can get started with one flash/strobe + reflector and stand or softbox and stand. you don't need a backdrop right away, you can just use any solid color wall.
flash vs strobe. strobes are more powerful and faster cycling but require ac power or battery packs. flashes are more portable.
for a backdrop you can just use these two. it's a bit cheaper.
https://www.amazon.com/LimoStudio-Adjustable-Background-Backdrop-AGG1112/dp/B00E6GRHBO/ref=sr_1_3?ie=UTF8&qid=1494795437&sr=8-3&keywords=Backdrop
https://www.amazon.com/Neewer-Collapsible-Background-Photography-Television/dp/B00SR28X9S/ref=sr_1_6?ie=UTF8&qid=1494795437&sr=8-6&keywords=Backdrop
for the lights, you can just buy stands and softboxes or flash reflectors seperately. i wouldn't recommend that kit. start with one softbox or one flash reflector and stand. then add more as you need.
stands
https://www.amazon.com/Neewer-Photography-Relfectors-Softboxes-Backgrounds/dp/B00K69A0QY/ref=sr_1_2?ie=UTF8&qid=1494795534&sr=8-2&keywords=softbox+stand
softboxes, multiple sizes available.
https://www.amazon.com/Neewer-centimeters-Octagonal-Speedlight-Photography/dp/B00PIM3I6I/ref=sr_1_4?s=photo&ie=UTF8&qid=1494795485&sr=1-4&keywords=softbox
flash reflector
https://www.amazon.com/LimoStudio-Double-Reflector-Umbrella-AGG127/dp/B005AKF4F6/ref=sr_1_7?ie=UTF8&qid=1494795671&sr=8-7&keywords=flash+umbrella
$100 is a lot for a light stand. I use this $15 one and no compliants. I've used it for the same speedlight and umbrella setup you're using, as a reflector stand, and even for a ring light.