Reddit Reddit reviews Park Tool Home PCS-9 Mechanic Repair Stand

We found 6 Reddit comments about Park Tool Home PCS-9 Mechanic Repair Stand. Here are the top ones, ranked by their Reddit score.

Sports & Outdoors
Cycling
Bike Tools & Maintenance
Bike Workstands
Outdoor Recreation
Park Tool Home PCS-9 Mechanic Repair Stand
Screw type clamp adjusts to fit tubes of various shapes from 7/8" to 3" (24mm to 76mm)Clamp rotates 360 degrees for easy access to any part of bike. Will also clamp on aero shaped seat postsFolds to 41" (104cm) for portability and storageScrew type clamp adjusts to fit tubes from 7/8 to 3"Clamp rotates 360 degrees for easy access to any part of bike
Check price on Amazon

6 Reddit comments about Park Tool Home PCS-9 Mechanic Repair Stand:

u/cinemanerd · 2 pointsr/bicycling

I have the PCS-9 and I love it. It can be a little heavy but that just adds to the stability of the stand. I would spend the little extra for the PCS-10 as it has quick-release so it will be quicker to set up and put away. I would say it is very much worth the money esp. if your are doing your own wrenching.

u/LouRider · 2 pointsr/MTB

I ended up w/ this one from Nashbar. I got it because my bikes are carbon and I was worried about clamping the seat posts. Plus it was cheap, around $100 after coupons. While the quality is fine, it's turned out to be a bit of a pain to have to take off the tire to work on my bikes. Plus, I had to get an adapter for my through axle.

If I had to do it over again, I'd get a Park Tools. Probably the PCS-9. You pay a little more, but everything I've gotten from them has been high quality.

In fact, I'll probably sell mine on CL and get that one in the next year...

u/rhymeandsteal · 2 pointsr/bikewrench
  1. Pedro's has a torque wrench for $150. I like their other tools, but I haven't used this because I don't use torque wrenches. Park Tool has a cheaper one (http://www.amazon.com/Park-Tool-Ratcheting-Torque-Wrench/dp/B0042F8BG4/ref=pd_sim_sbs_sg_1?ie=UTF8&refRID=0WB6GBF046GHCXJ6EEH3) but you don't hear good things about cheap torque wrenches.

  2. Brakleen is what you want to use for brake rotors.

  3. Park Tool has some relatively inexpensive folding stands. such as http://www.amazon.com/Park-Tool-PCS-9-Mechanic-Repair/dp/B000OZFJTI/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1405950778&sr=1-1&keywords=pcs-9

    Rear derailleur: Loosen the cable. Make sure your H screw is set so the upper pulley is in line with the smallest cog. Tighten the cable. Shift once. If it doesn't make it to the next gear, tighten the cable by turning the barrel adjuster counter-clockwise. If it shifts too far, loosen the cable by turning the barrel adjuster clockwise. Continue in this fashion all the way through the gears, making small adjustments if needed as you go along. When you reach the lowest gear, push on the derailleur gently while pedaling to make sure the L screw is set properly. If it hits the spokes, tighten it a quarter-turn at a time until it doesn't. Shift all the way back down to high gear again. If the shifts are slow, loosen the cable. If the shifts jump down 2 cogs, tighten the cable.

    That should do it. If this doesn't fix the problem, you likely need a new cable.
u/grandzooby · 1 pointr/bikewrench

I'm seeing the Park PCS 9 on Amazon for about $120.
http://www.amazon.com/Park-Tool-PCS-9-Mechanic-Repair/dp/B000OZFJTI

I have the PCS 10, but I think the PCS 9 is pretty good too.

u/wa11yba11s · 1 pointr/MTB

I second the "don't buy a kit" sentiment. Assemble your own kit of the most commonly used tools and get the special use ones as you need them. Buying cheap tools will just frustrate you and they won't last long. For the tools you'll commonly use, Allen keys especially, buy the good stuff.

Allen wrenches you're going to be using constantly. Buy the best ones you can afford. A t-handle set and traditional bend set is a good idea. You might want a balldriver set too to get around corners. Elkind makes a decent and reasonably priced Allen wrench.

You'll probably want at the least a small metric socket set. I like craftsman for reasonably priced sockets.

A set of screwdrivers is also a must. You can probably cheap out on these a bit. You need flat blade and Phillips. You should also have some torx drivers. You can likely get by buying a 10-in-1 screwdriver that'll have all those in one.

Now for the less used specialized bike tools stuff like cone wrenches and Cassette wrenches etc.. I typically buy Park tool if I'm going to use it more than 1x every year or so. If I am very rarely going to use it I might cheap out or borrow a tool.

Lastly if you're going to do a lot of bike repair consider getting a bike stand. This'll cost probably as much as all the tools I listed prior. This is a good one to look at. Park Tool Home PCS-9 Mechanic Repair Stand https://www.amazon.com/dp/B000OZFJTI/ref=cm_sw_r_cp_api_SeMhzb64DMQPR.

u/thumbsup4rocknroll · 1 pointr/bikewrench

There are some awful reviews. This is something you should only need to buy once in your lifetime.
Check out Feedback or Park brands. Check Craigslist, as I have seen them for sale there. There may be some options on eBay, though I have never checked.
Here's a nice one: http://www.amazon.com/Park-Tool-PCS-9-Mechanic-Repair/dp/B000OZFJTI/ref=sr_1_23?s=sporting-goods&ie=UTF8&qid=1395455365&sr=1-23&keywords=feedback+sports