Reddit reviews Pro Comp Steel Wheels Series 97 Wheel with Gloss Black Finish (15x8"/5x4.5")
We found 2 Reddit comments about Pro Comp Steel Wheels Series 97 Wheel with Gloss Black Finish (15x8"/5x4.5"). Here are the top ones, ranked by their Reddit score.
Wheel Size: 15x8 | Bolt Pattern: 5 on 4.5 | Backspace: 4.5Max Load: 1600Finish: Gloss BlackBore Diameter: 83mmCenter cap and lug nuts not included
I’m running these with 33” KO2s. If I were going with 35s I would go 16/17” rims. Rule of thumb I’ve heard is about 1/2 the diameter of the tire for the wheel. 16/17 inch would be just fine for airing down. You wouldn’t notice a difference compared to the 15. It also gives you room for better brakes. You’ll want those, esp. with 35s.
As far as back spacing goes, I think you should be fine with 3.75”. I’ve got plenty of room with the 33s. I’m assuming 12.5” wide tire?
I would highly recommend ditching the track bars front and rear. Helps immensely with flex and ride quality. Steering will probably suffer though. I also am not running a sway bar anymore. I took it off and couldn’t tell a difference driving. My recommendation would be take stuff off one by one and see if you notice/like it. Taking them off with only help when wheeling it.
They’re 15s. I went with the stock size because I already had wrangler radials on there that were basically new, and I’ll just get another set when they wear out. They’re like 75 a piece at Walmart, and I don’t do any offroading, I just like the look.
Anyway, this is the link on amazon: https://www.amazon.com/Pro-Comp-Steel-Wheels-Finish/dp/B00DJ6539U/ref=mp_s_a_1_4?keywords=procomp+wheels+15&qid=1572420730&sprefix=procomp+wheels&sr=8-4