Reddit reviews RiteAV 1 Gang Wall Plate (White) 2 Port - Cat6 (Shielded) Coax (White)

Do you own? I ran cables into a wall plate like this. Then down through the crawlspace (though attic would work too depending on the level of home) and out a similar outlet in another room.

Probably not something to do if renting though..

Most ethernet networks have range of 100m without requiring a repeater or switch. That's a LONG WAY and almost certainly further than the location of your hub from your room.

Here is a really long ethernet cable for $30. I'd recommend actually measuring the distance and planning it with your parents.

In my house I ran cables from the attic down into the walls by the hub and in each room. You can either have the cables stick right out of the wall, or if you want to be nicer about it, cut open the cable and wire them into a wall plate, patching them into your PC with a short cable. Here is a howto video. In the video he has a cable TV jack right next to it, and if you have something like that you don't even need to cut a new hole in the wall; you can just use a dual plate like this one.

> My folks doesnt want me punching holes in their newly built house.

If you get AT&T and they have to bring a new line inside the house, they'll have to drill whatever holes they need AND you would need to run an Ethernet cable from the AT&T modem into the attic, and then into the wall into your room and you'd have to cut a hole into the wall and patch the cable in, well if you want ethernet. I had to do something similar for a friend's apartment and put one of these in the wall: https://www.amazon.com/gp/product/B00F15CKQQ/

OR you can buy some powerline adapters and see if that works to bring internet to your room. Like this: https://www.amazon.com/TP-Link-Powerline-Adapter-Starter-TL-PA2010KIT/dp/B00AWRUIY4/

Running ethernet cables in the attic is much easier in a 1 story house, you just have to watch your footing and only step on the rafters, otherwise you'll fall through the ceiling. If you're in a 2 story house then good luck, not happening.


Powerline adapters are probably your best bet.

I just did a quick and dirty install of wired internet. I didn't really have a great option for a central location to set up my modem and router. What I ended up doing was keeping my router and modem in a bedroom I use as a home office.

I took each wall outlet for my coaxial cable and replaced them with ethernet/coax combo outlets to keep from needing to add extra outlet covers/boxes in the walls. The exception was at my router. I used a 4-port outlet like this in that room.

From there, I used my attic (and the help of my brother-in-law) to fish the ethernet cables down the walls in each room I wanted to wire (living room, master bedroom, guest bedroom), then each of those to the home office to connect to the 4-port outlet. Once I connected the outlets in each room, I labeled the ports in the office for convenience and plugged cables into the router for each room.

As far as the hardware, I have a Motorola DOCSIS 3.0 cable modem since I'm currently stuck with Comcast. I use a Netgear router with a USB port for connecting a hard drive.

My primary reason for setting all this up was to be able to access the full bandwidth of my internet connection and not need to be concerned with any wireless interference (granted, I probably wouldn't notice where I live). I also like the idea of minimal buffering with my home media server setup to multiple devices. I have a couple of gaming consoles and a PC all wired and I enjoy not dealing with wireless except on tablets, phones, or laptops.