Reddit reviews Rockford Fosgate P3D4-12 Punch P3 DVC 4-Ohm 12-Inch 600-Watt RMS 1200-Watt Peak Subwoofer
We found 11 Reddit comments about Rockford Fosgate P3D4-12 Punch P3 DVC 4-Ohm 12-Inch 600-Watt RMS 1200-Watt Peak Subwoofer. Here are the top ones, ranked by their Reddit score.
The P3 Series is Rockford Fosgate’s best performing Punch subwoofer delivering reference quality bass in our most popular modelsThe Punch P3D4-12 is a 12” 4-Ohm DVC (dual voice coil) subwoofer with 600 Watts RMS / 1200 Watts Max power handling and custom 10-AWG nickel plated push terminalsFeaturing anodized aluminum cones and dustcaps, with a unique spider venting design to keep the motor cooler and a new hybrid stamp-cast basket providing super strength while minimizing weight and resonanceBest used in standard sealed or vented enclosures {Sealed (Vb): 1.02 cu. ft. (28.8 Liters) / Vented (Vb): 1.79 cu. ft. (50.6 Liters) / Mounting Depth: 6.66 in. (169.3 mm) / Cutout Diameter: 11.25 in. (285 mm)Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller12-inch, dual 4-ohm subwoofer with 1200 watts maximum power handling (600 watts RMS)Anodized aluminum cone and dustcap with Rockford "VAST" (Vertical Attach Surround Technique) surroundHigh-temp voice coils with spun-laced Nomex re-inforcement collarFlex fit basket for slight adjustments when mounted;Cutout Diameter: 11.25 inches. (285 mm) ; Mounting Depth: 6.66 inches. (169.3 mm)One-year limited manufacturer's warranty
I don't think you need to spend $200 on a sub if you're just adding frequency. If everything else is stock and you're not in a large SUV or van I would just go with a single 12". One of these two perhaps http://amzn.com/B0028AYIXK http://amzn.com/B004UFHXNI
But the sound quality and loudness will depend heavily on your amp - what do you have or have in mind to push the sub?
Thanks a ton, dude. Still new to all this. The other sub I was considering is this Rockford Fosgate. I guess I'll think it over for a bit.
If i were you i would check out Pioneer Champion, Rockford Fosgate, or Dayton RSS.
The sundown is a strong spl sub from what i hear. I just haven't used them yet and cant give you an opinion on em other than people say that they need every bit of power you can give them. In the comments folks are saying there running 1400w rms to one, so think about that. The others i have. I am running two champions and they flex @ ~500rms each. I got them when they were on sale for like 90 a piece. Such a steal.
But to answer you question, imo, that box might not sound the best with the SA-12, or the Dayton Hos.
I think it all depends on what your goal for the vehicle is? Do you plan on tracking it? or just to make it a bit faster around town? Do you want it to look a little modified or stock?
Anyways, I'll link a bunch of stuff I personally prefer and in the order I would install them...
Accessories:
Step 1:
Step 2:
Step 3:
Step 4: (all maybes)
Lets talk some talk.
Good
Better
Best
Going with "Good" you're looking at a simple subwoofer upgrade.
You're going to need about 500+ Watts RMS to overcome your back seat. Then You're looking at a ported box with maybe a 12" or 2-12" subs that can each handle good power. Lets go with amazon's stuff and a Single 12" for good measure.
The Rockford Fosgate P3D4-12 @ $130
http://www.amazon.com/Rockford-Fosgate-P3D4-12-1200-Watt-Subwoofer/dp/B004UFHXNI/ref=sr_1_1?ie=UTF8&qid=1464050827&sr=8-1&keywords=Rockford+fosgate+p3
An Atrend Box the 12SQV $65 http://www.amazon.com/Single-Vented-Square-Box-Enclosure/dp/B0007XV5G8/ref=sr_1_1?ie=UTF8&qid=1464050938&sr=8-1&keywords=12sqv
The Rockford Fosgate R500X1D Prime Amp @ $120
http://www.amazon.com/Rockford-Fosgate-R500X1D-1-Channel-Amplifier/dp/B00BF6HYDE/ref=sr_1_1?ie=UTF8&qid=1464051007&sr=8-1&keywords=r500x1d
A REAL COPPER 5 Ga Wire Kit: XD-ACS60 $58 http://www.amazon.com/JL-Audio-XD-ACS60-Amplifier-Connection/dp/B0041MU7B0/ref=sr_1_1?ie=UTF8&qid=1464051265&sr=8-1&keywords=xd-acs60
A PROPER Line Out Converter LC2i $68
http://www.amazon.com/AudioControl-2-Channel-Converter-Subwoofer-Control/dp/B01EDFPNSG/ref=sr_1_1?ie=UTF8&qid=1464051367&sr=8-1&keywords=LC2i
So, This is the MINIMUM for just adding one sub, Without going with the crap out there.
You are currently at $441 of your $800 Budget Limit.
Lets calculate installation.
Labor is going to be around $264
Labor + Parts = $705
I have no idea how to make your car better with $95 except maybe put some sound deadening in your trunk.
Keep in mind, these prices are at AMAZON's.... Not retail.
$700-800 Sounds like a lot, until you realize that GOOD Labor isn't cheap.
If you think that's expensive, Go ask your dealership how much it costs to replace your alternator... JUST your alternator.
If you plan on installing yourself, Amazon is the place. Just don't skimp on the amp quality (thermal protect and fuses) or wiring, or you could have an electrical issue on your hands and be up shit creek without a warranty. Happened to me when I bought an MTX amp off ebay years ago and it failed and smoked my subs simultaneously.
Do you plan on having a full-range amplified system? If not, you might wish to stay in the same price range but perhaps get a different sub with more modest power handling (600wrms/1200peak) that will give you more musical tightness without a boom that drowns everything else out. I personally like the RF P3D4-12 and would pair it with a P500X1bd . In some cases, if you buy a RF wiring kit, and have it installed by an RF authorized dealer, you'll get a 2 year warranty on everything.
Rockford Fosgate P3D4-12 Punch P3 DVC 4-Ohm 12-Inch 600-Watt RMS 1200-Watt Peak Subwoofer https://www.amazon.com/dp/B004UFHXNI/ref=cm_sw_r_cp_api_i_9L28AbQPQWH9M
Have you looked into the P3s or the more budget friendly P2s? Jl also makes some nice subwoofers like the w3s.
Here are the parts I'm considering so far
2 sets of these for all 4 doors
Alpine SPS-610C 6-1/2" Component 2-Way Type-S Speaker System https://www.amazon.com/dp/B004THAWHG/ref=cm_sw_r_cp_apa_kqsnyb7A57SH7
These 6x9 for rear deck
Polk Audio DB691 6-by-9-Inch 3-Way Speakers (Pair, Silver) https://www.amazon.com/dp/B000P0R6KW/ref=cm_sw_r_cp_apa_WusnybVYBR8YD
This for getting signal to amp. Not sure if complete overkill for my goal setup.
AudioControl LC7i Black 6-Channel Line Output Converter with Bass Restoration https://www.amazon.com/dp/B00ATHBO86/ref=cm_sw_r_cp_apa_bwsnyb2TGNBDW
And this subwoofer. I might go with 2 of them when I add them to my car.
Rockford Fosgate P3D4-12 Punch P3 DVC 4-Ohm 12-Inch 600-Watt RMS 1200-Watt Peak Subwoofer https://www.amazon.com/dp/B004UFHXNI/ref=cm_sw_r_cp_apa_kysnybS8CXRZS
Like stated above I have no idea on the amplifier. I would like to have it power my speakers and subwoofer, so I'm guessing a multi channel would be better? In the end i would like to have a woofer and tweeter per door, 2 rear deck 6x9, and a subwoofer or 2. Please let me know if anything needs to change. I'm open to all opinions and suggestions.
I have $300 on Amazon so I could add a couple hundred if needed but now I'm only thinking about 1 sub. I'd say $300-$400 for all of the equipment and then installation is separate.
I'm thinking of Rockford P3 600W for the sub, 12 in. Ported Enclosure as the box, and Zapco Mono Class d for the amp.
Would this work alright or should I get a different amp for only 1 sub? Also, should I get the 2 ohm sub or the 4 ohm sub? Let me know what you think.
Ok I think I will put a 12 in my backseat now. is this the amp? https://www.amazon.com/dp/B00BF6HYDE/ref=cm_sw_r_cp_api_XlXqzbKCMPHC0
is this a good sub for the amp? https://www.amazon.com/dp/B003ZWBG7Q/ref=cm_sw_r_cp_api_BnXqzb188Y4KP
these wires? https://www.amazon.com/dp/B0050I6KII/ref=cm_sw_r_cp_api_SoXqzbR928SJY
And is this box good? Single 12" https://www.amazon.com/dp/B00GUT3JOO/ref=cm_sw_r_cp_api_GpXqzbKXFSYCR
Would this sub be better since the amp is only 500 rms https://www.amazon.com/dp/B004UFHXNI/ref=cm_sw_r_cp_api_zqXqzb6PKAHB4
I don't have any drills or anything to make my own sub enclosure so that's why I'm asking if that box would be good enough or I can see if I can get someone to make one for me
Ok, let's reorganize your shopping list here...
so far you have spent $400...
Let's do this a little bit differently.
Your Headunit is fine, however with most pioneers they have shitty RCA grounds (i have one) and eventually will piss you off. The stereo only has 1 set of RCA outs, which is fine for subs but if you intend on upgrading later to a 4channel amp too it would be very beneficial to start off with a proper amount of RCA's. Here would be a very similarly priced and great sounding receiver with 2 rca outs and slightly higer voltage preamps which is always nice.
Now, for your subs...don't do 2 12s just yet. Hold off on that until you can actually afford to power 2 of them with the right wattage and space required.
Do this instead:
Same brand but higher model
With this amp
and this wiring kit.
Your box unless you want to build it should be somewhere around this size
No idea what the tuning on that box is..but should be ok.
All in all it is going to be about 80 bucks more...but this will do soooo much nicer.