Reddit reviews Rosewill Countertop Portable Electric Machine Food Fruit Dehydrator
We found 14 Reddit comments about Rosewill Countertop Portable Electric Machine Food Fruit Dehydrator. Here are the top ones, ranked by their Reddit score.
5 Tray Capacity : BPA-Free Herb trays, roll trays and stackable traysAdjustable thermostat: 95 to 155 Degress F, 250 Watt of drying powerA fast & easy way to make delicious, healthy and natural snacks like banana chips, fruit roll-ups, beef jerky, and dried meatsUse for drying-crafts: flowers, apple wreaths, meat and moreBottom-mounted fan and heating element provide consistant air flow for optimum drying and no rotation needed
I bought this for $35 and cut the insides out of each layer. Fits 2 spools typically (unless theyre the wide spools). Works great with variable and reliable temp
https://www.amazon.com/Rosewill-Countertop-Dehydrator-Adjustable-RHFD-15001/dp/B018UR4XJI/ref=mp_s_a_1_13?keywords=food%2Bdehydrator&qid=1562872208&s=gateway&sr=8-13&th=1&psc=1
buy this one instead for 1/3 the price.
https://www.amazon.com/gp/product/B018UR4XJI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
this is the one i have. Cheaper and has multi heating levels
https://www.amazon.com/gp/product/B018UR4XJI/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
The Rosewill Model RFHD-15001 is exactly the same dehydrator as the PrintDry model on Matterhackers. with the exception of the badging and top components. You’ll have to cut out the tray floors yourself to get the filament to fit.
You can buy a food dehydrator on amazon for like 30 something bucks and then you just cut out the tray part from each stacking ring and there you go! Took me like 10 minutes and it is perfect for drying PLA and PETG.
Rosewill Countertop Portable Electric Food Fruit Dehydrator Machine with Adjustable Thermostat, BPA-Free 5-Tray RHFD-15001 https://www.amazon.com/dp/B018UR4XJI
Similar (prob identical) models can be had from Ali express for cheaper if you don’t mind the long shipping time.
Also if you want to print from the dehydrator you can put a lazy Susan in there and make a little hole to feed filament through. This is exactly what the filament dryer and feeder they sell for 100 bucks is constructed of.
If you haven't looked into it, a regular $30 food dehydrator will work. this is what I got, works great. Use the temps listed Here and it will be fantastic.
Bonus points if you add a lazy susan bearing to the bottom, and add a bowden connector to feed filament through as it stays dry during a print. Works fantastic for the hygroscopic Nylon and PETG filaments. I've run PLA through as well and it does print better even though it doesn't absorb as much water.
Is this the same one? https://www.amazon.com/dp/B018UR4XJI/ref=cm_sw_r_other_apa_i_diQ7CbCZWKT3G
What modifications were required?
I wonder how hacking together one of these and a plastic storage bin would work to dry multiple spools at once...
Snapping during a print is usually an indication of moisture absorption, get a food dehydrator and try drying the roll before you give up on it. Rosewill has a rebranded one which is basically the same OEM as the $125 Printdry system.
My budget go to is still Inland from Microcenter, their PETG and PLA+ is supposed to be Esun, regular PLA is Polymaker. Another vote for Atomic filament here, I only used their PETG but diameter and color are super consistent and some colors even have Pantone code (I've had a few of the darker colors of Inland vary shade during long prints or between consecutive smaller prints). Veracity from Filastruder is also super consistent for color and diameter from the PETG and HTPLA (listed as ProPLA) I've used and comes in MasterSpool compatible coils.
Rosewill Countertop Portable Electric Food Fruit Dehydrator Machine with Adjustable Thermostat, BPA-Free 5-Tray RHFD-15001 https://www.amazon.com/dp/B018UR4XJI/ref=cm_sw_r_cp_apa_i_DPbuDbZDK6DDM
Easily modified, fits a spool easily
Fruit/vegetable dehydrator with a thermostat.
https://www.amazon.com/Rosewill-Countertop-Dehydrator-Adjustable-RHFD-15001/dp/B018UR4XJI
Put it in the bathroom or bedroom if Kitteh won't leave it alone while it's processing.
As I said to another redditor below, I only chose this because it was within my allotted budget, was rectangular instead of round (fits into spaces more effectively) and something I didn’t add was that it also had decent reviews. I suspect even the cheapest dehydrator would get the job done, and I’ve seen many posts of people who swear by their cheapo dehydrators, so really it’s a matter of preference and budget.
This dehydrator seems like a decent one, based on price and rating, but the rating is only based off of 180 reviews. There was another with higher ratings but the size of the dehydrator itself seems significant smaller.
Don't buy the filadry one. It is the exact same as this:
www.amazon.com/Rosewill-Countertop-Dehydrator-Adjustable-RHFD-15001/dp/B018UR4XJI/
There are spool holders for it on thingiverse. I am sure there are others but this one is super cheap and I have it so I can vouch for it's effectiveness.
Dry your filament this is what I use works well Rosewill Countertop Portable Electric Food Fruit Dehydrator Machine with Adjustable Thermostat, BPA-Free 5-Tray RHFD-15001 https://www.amazon.com/dp/B018UR4XJI/ref=cm_sw_r_cp_api_i_q-T5Cb8M4WNG1
This is a good option for not very much money.
I've been drying all my filament now that I've had success with the PETG and it's awesome. TPU prints so much better when it's dry, same with PLA. You may need some occasional re-drying with PETG if it's out for very long prints, but other than that you just dry once then store properly.