Reddit reviews Silverhill Tools ATKTR4 Triangle Head Screwdriver Set (w/carry pouch) Tool Kit for Fix Repair and Battery Replacement of Thomas McDonald's Toy Triangle Driver Set

Amazon baby

Found this: http://www.amazon.com/gp/product/B004IUEHYS/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687582&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B001F3FUBK&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1R80WTBY18X5ABCZH8JT

not sure if any of em will fit though.

something like this?

https://www.amazon.com/Triangle-Screwdriver-Electronic-McDonalds-Disassemble/dp/B07H3S81D4

​

if so, try googling first, and to really get help, you need to add a picture.

​

EDIT: here's another one....

https://www.amazon.com/Silverhill-Tools-ATKTR4-Screwdriver-Replacement/dp/B004IUEHYS

Not sure of the size you need, but here is a set of triangle hand drivers on amazon.

https://www.amazon.com/Silverhill-Tools-ATKTR4-Screwdriver-Replacement/dp/B004IUEHYS

Just so you guys know, this (http://www.amazon.com/gp/product/B004IUEHYS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) does NOT work. Someone suggested it in a thread for me; even the smallest screwdriver is too big.

You're right about the Kidney Puncher kit, but I'm not sure if OP knows. The Kidney Puncher kit comes with those screws as HEX screws, NOT the triangle screws, so it's much easier to find better tools to use on it. The triangle screws are the Mutation X v2's Achilles Heel, and I look forward to finally buying the Kidney Puncher kit.

http://www.amazon.com/gp/aw/d/B004IUEHYS?qid=1417550431&sr=8-1&vs=1


Someone in one of the reviews said it works for the mxv2

Perhaps one of these might work.

HERE
Please use the search function. Found this in 2 min. Not 4$ btw :D

http://www.amazon.com/Silverhill-Tools-ATKTR4-Triangle-Screwdriver/dp/B004IUEHYS/ref=sr_1_1?ie=UTF8&qid=1417441458&sr=8-1&keywords=triangle+bit

I bet THIS would help.

Screwdrivers

You could also just buy stndard hex grub screws and replace the triangles.

Here is the non-mobile link from the comment above
***
This bot is supported by the referral link above. If you wish to not use a referral link, you may use this link instead.

Here is my mini-review of the light. I got the light from Amazon for ~19$ with free shipping. The light comes with a AA battery and lanyard. I ditched the lanyard. The light also comes with an attached pocket clip (more on this later).

This light is as bright as my 3xAAA Costco TechLite Lumen Master and much smaller. To access the modes you click the light once to turn it on, then tap the cap to cycle through the Hi-Low-Strobe modes. You can also do this by quickly turning the light on and off.

Originally I got this light for one purpose.. to use it in the Fenix Headband system ala Nutnfancy. I thought I would save some money by not having to spend 40$ on the Quark Mini AA. I was wrong. The first problem was the pocket clip. It was getting in the way of the headband's flashlight holder. The clip is screwed in by triangle screws. To get the clip off I had to buy the triangle screwdriver from Amazon. Then afterwards I found out even with the pocket clip off this flashlight is too thick for the Fenix Headband (if you take the pocket clip off there are 2 holes where the screws fit that expose the innards because the flashlight as a whole did not fit the Fenix Headband I have the clip back on I might look in to some small "O" ring for more water resistance). Even though it will not be useable for what I originally intended. I still like the light enough to use it as my EDC light.

TLDR: This light will not work in a Fenix Headband, otherwise great EDC.

I don't know the exact size or if it's even in THIS set, but that's what would work.