Reddit reviews STADEA Diamond Polishing Pads 5" Dry - Concrete Set of 5 Pieces with Rubber Backer
We found 1 Reddit comments about STADEA Diamond Polishing Pads 5" Dry - Concrete Set of 5 Pieces with Rubber Backer. Here are the top ones, ranked by their Reddit score.
STADEA 5" Diamond Dry polishing pads concrete 5 pieces Pads + 1 Rubber Backer (5/8"11 Threaded) set, 1 piece X Grit (50, 100, 200, 400, 800), Rubber BackerProfessional Grade 5" Diameter Dry Diamond Polishing Pads and Rubber Backer for Concrete, Stone, Glass etc polishing1.2 MM high, velcro backed and extra flexible to polish contoured (Demi, bullnose etc) or straight surfceDesigned for Dry Polish, Dry pads Works without Wet Polisher, no watery mess, Optimal RPM 1800 Max RPM 3000Works great on Concrete, stones, glass etc. Can be used Wet as well
So as promised here are the majority of materials/tools I used to make the counters. I used the stain instead of actually coloring the concrete as I was worried about getting inconsistent coloring since I was doing multiple batches.
Now, my mistake I made which turned ok after the fact was that the concrete became too dense for the stain to penetrate. Despite using the sawzall to try and vibrate the air bubbles out from the bottom of the concrete but I was not able to get all of them out so there was pin holes on some of the counters. So I made a slurry as recommended and filled in all the holes and then sanded the high spots down. So when I stained the counters the areas that had been filled with slurry took to the stain very well but the actual concrete only became a darker grey. I communicated with a staff from ConcreteSolutions and they were very helpful in trying to get the stain to penetrate the concrete. I stained it probably 3 times and then just left it as it was and now I really love how it turned out despite not being as planned. Its almost like a black and grey leopard spot on most of the counters, the island area was the last poured and had hardly any air bubbles so its more solid color…
I let them sit and harden at least a week before I flipped them over and started sanding away. I did not want a exposed aggregate look so I had to be careful about sanding too much…
The stain and sealer work great and like the other user said, liquid just sits on an it and doesn’t not penetrate.
If you have any questions ask away- I had lots of friendly people help me on other forums and was very thankful for their help….
Chengs Book
http://www.amazon.com/dp/1561584843/ref=pe_385040_30332190_TE_3p_dp_1
Sealer
http://concretecountertopsolutions.com/products/sealers-and-polish/z-siacryl-14-sealer/
Polish
http://concretecountertopsolutions.com/products/sealers-and-polish/z-counter-shine-polish/
Dye/Stain
http://concretecountertopsolutions.com/products/stains-and-integral-colors/z-aqua-tint-dye/
Nylon Fibers
http://www.amazon.com/gp/product/B000COCDCM
SUPERPLASTICIZER
http://www.ebay.com/itm/-/161011304020
Diamond polishing pads
http://www.amazon.com/gp/product/B00AB1UMOW
Variable speed polisher
http://www.harborfreight.com/power-tools/polishers/7-in-10-amp-variable-speed-polisher-60626.html