Reddit reviews 3.5mm Audio Y Splitter Cable for Speaker and Headphones
We found 21 Reddit comments about 3.5mm Audio Y Splitter Cable for Speaker and Headphones. Here are the top ones, ranked by their Reddit score.
This Headphone Y Splitter offer you another way to expand your speakers and/or headphones.A stereo 3.5mm male plug connector and two stereo female 3.5mm jacks on the other endThe Audio Y Splitter is specifically designed for quality audio applications.The 3.5mm speaker and Headphones Audio Splitter allows you to connect two mini speakers or headphones to the same jack on your device such as portable CD player, sound card, or any mini-stereo audio device with 3.5mm jacks.Length: Approximately 15.5cm Long; Package included: 1 x 3.5mm Audio Splitter
Probably not sound very good but you can go real cheap and get one of these.
https://www.amazon.com/3-5mm-Audio-Splitter-Speaker-Headphones/dp/B005GNQNHU
Most audio drivers will automatically stop other ports from working if one port is outputting audio.
If you just need the same audio outputted at the same time jut get a $5 adapter like this or this
Maybe you could use a y-splitter like this? https://www.amazon.com/dp/B005GNQNHU/ref=cm_sw_r_cp_api_iIdNBbG96W9TB
A regular analog Y audio splitter is the simplest.
If you want it done digitally, it is more trouble than its worth.
When you say "connected at the same time", I assume you just want them plugged in at the same time but not actually playing music from both at the same time?
Simplest option is to get a headphone splitter (https://www.amazon.com/3-5mm-Audio-Splitter-Speaker-Headphones/dp/B005GNQNHU) and plug your CCA and PC into the female ports and the the male jack into your hi-fi.
I had this setup for years when I used my Xbox and PC on the same set of speakers.
Alternatively you could use a 2 way AV switch. This requires you to push a button to select which source you want to send to the outline of the switch.
I can tell you that almost every attempt I've ever tried at doing something like that has failed miserably. You'll be surprised how obvious just a few ms of delay in a sound is to you.
Someone may have a solution, but I've always found the end result of using one source and splitting it to be much easier than trying to produce multiple outputs. If you're already using a 3.5mm jack, just use one of these.
It sounds like you need an aux splitter like this.
Get this. Connect the 3.5 mm cable from your monitor to one end of the female end. Do the same with a line running from the PC to the other open end. You should be good to go.
If you can't make your sound card simultaneously output through the headphone and speaker connector, you'll need a splitter cable http://www.amazon.com/3-5mm-Audio-Splitter-Speaker-Headphones/dp/B005GNQNHU/ref=sr_1_11?ie=UTF8&qid=1425990772&sr=8-11&keywords=3.5+splitter
You can use thi Audio Splitter. Both set of speakers will get the same output.
That's what I am thinking. Seems like this makes sense:
3.5mm Audio Splitter into Computer -> 3.5mm - 50 ft -> 3.5mm to RCA Adapter -> Analog to Digital Adapater -- like you recommended -> [Audio Optical Cable into TV]
My only question is that a lot of these converters show a TosLink port, and I do not have knowledge of what that is compared to a SPDIF. Are they compatible, or...?
If you just want to play through both simultaneously, then a straight splitter like this would likely work.
$1.51 - free shipping
http://www.amazon.com/3-5mm-Audio-Splitter-Speaker-Headphones/dp/B005GNQNHU
If you already have the optical from the apple TV to your speakers, why dont simply turn the volume on the TV to 0?
Most tvs has separate audio levels for different inputs, so when you change to another HDMI input it would reset the volume for that one, and turn to 0 again when going back to apple tv.
3.5 mm outputs from TVs are made for headphones, so it probably wont change when changing inputs. Does the tv has an optical output?
Still, It sounds to me like you are using a passive 3.5mm splitter like this one to connect both the audio from the TV, to the audio from the dac. This is simple not the right adapter for this. This will most likely burn or damage the input of the speakers in the long run. You need some kind of selector to break the audio from one input. This will eliminate the delay you get. Something like this, and just switch as needed.
would an audio splitter like this work?
https://www.amazon.com/3-5mm-Audio-Splitter-Speaker-Headphones/dp/B005GNQNHU
https://www.amazon.com/3-5mm-Audio-Splitter-Speaker-Headphones/dp/B005GNQNHU
3.5mm audio splitter.
Ah that sucks.
On a sidenote, you mentioned that you like having two sets of headphones for the audio.
Would another solution be an Bluetooth audio receiver (like this one from etekcity or from AmazonBasics) with a 3.5mm audio splitter and two headphones/earphones?
No, the XLR's are inputs, not outputs.
No daisy-chaining is supported with those speakers.
If you really wanted to run all four (not sure why you'd want to), you could use a 3.5mm y cable then run a 3.5mm->RCA to each set of speakers.
Does the headset contain 1 connection for mic and 1 for audio? If so you need a Y splitter. https://www.amazon.com/3-5mm-Audio-Splitter-Speaker-Headphones/dp/B005GNQNHU
If it only has 1 connection for both audio and mic and you can't hear game audio, it might require changing something in the settings on the Xbox.
I wish I could help you out more but I don't own that headset.