Reddit reviews Amon Tech Windscreen Window Wiper Blade Arm Puller Auto Remover Removal Tool
We found 3 Reddit comments about Amon Tech Windscreen Window Wiper Blade Arm Puller Auto Remover Removal Tool. Here are the top ones, ranked by their Reddit score.
Features:Removes wiper arms on many foreign and domestic cars and light trucks quick easily and safely.But please note the size,some of car do not fit it and item does not fit FJ Cruiser wiper motor armSize: Collar Size: Approx.15mm / 0.59" , Internal Height: Approx. 27mm / 1.06" This is very important befor you orderNote: Please allow 1-3mm error due to manual measurement. Thanks for your understanding.Specification: Avoids damage to vehicle bodywork or wiper assembly. Suitable for straight and splined spigots up to 15mm diameter.Explain: Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft removing the arm
If there is any clicking noise, most of the time electricity isnt causing the problem.
Get yourself something to measure the voltage (Even a lightbulb 12V 21W is enough > Look it up on youtube).
If its ok, replace the motor.
But nyfdup is right. Also check the wiring for the trunk on the left side :) Its easy and if its broken, even you can see it.
If volage AND wiring is ok, replace the motor. Its a very common thing.
BUT! be aware, your wiper doesnt lose that easily
You need a special tool to break it free without destoying the glass..
Tool like that > Amazon
If you have the tools ahead of time (unlike me), I would say it's definitely doable in about an hour.
You'll want a wiper assembly tool like this one:
https://smile.amazon.com/Amon-Tech-Windscreen-Remover-Removal/dp/B01HJBM2WG/ref=sr_1_2_sspa?crid=39LZHU7SU7KN6&keywords=wiper+arm+removal+tool&qid=1557626963&s=gateway&sprefix=wiper%2Caps%2C158&sr=8-2-spons&psc=1
I got mine from my local O'Reilly because I was determined to get it done that day. Otherwise, I would have planned ahead and ordered it.
Then to cut the ends off of the drain, I had to get a long-handled set of needle nose pliers from Walmart like these:
https://www.walmart.com/ip/8-Nose-Pliers-Sbln8p/34771013
I ended up just kind of pulling and tearing those little flaps off. My hands are too big and I couldn't even reach the driver side with scissors. It was so frustrating, but only because I was unprepared... The wiper assembly doesn't just come off, so I let it soak a few times with the PB Blaster. I honestly thought I was never going to get it, so I was pretty ecstatic when it started budging. YouTube is a good resource for this part if you're unfamiliar. Good luck! Let me know if I can help further!
I had this same issue a while back. I used two different items. I tried using a gear puller, but it wouldn't fit below the motor pinion. The claws were too thick. I ended up using a Windscreen Window Wiper Blade Arm Puller to get it going. Then I switched to the gear puller. I forgot what size the gear puller was, but here it was something like the one I linked below. Some heat couldn't hurt as well.
https://www.amazon.com/Pro-Grade-18212-4-Inch-Adjustable-Puller/dp/B002O16UGQ/ref=sr_1_4?ie=UTF8&qid=1523555996&sr=8-4&keywords=gear+puller
https://www.amazon.com/Windscreen-Window-Puller-Remover-Removal/dp/B01HJBM2WG/ref=sr_1_1?ie=UTF8&qid=1523555789&sr=8-1&keywords=windshield+wiper+blade+puller