Reddit reviews DEWALT 20V MAX Hammer Drill, 1/2-Inch, Tool Only (DCD985B)
We found 4 Reddit comments about DEWALT 20V MAX Hammer Drill, 1/2-Inch, Tool Only (DCD985B). Here are the top ones, ranked by their Reddit score.
High efficiency motor delivers 450 unit watts out of max power for superior performanceAlso has a LED light with 20 second delay after trigger release Batteries not includedUses DEWALT 20Volt Max lithium ion batteries which offer longer run time and enhanced durabilityHeavy duty 1/2 Inch metal ratcheting chuck with carbide insertsKit includes drill and 360 degree side handle 3 speed all metal transmissionBattery & Charger Sold Separately*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
I think it’s around $50 per day at a Home Depot near me, I’m in Canada though. FWIW, a DeWalt drill like this one (DCD985) has a hammer drill mode but can also be used for wood, metal, etc. - just use a masonry bit when you’re on hammer drill mode and going into concrete. Other power tool manufacturers likely have similar tools, so if you were planning on making the investment anyhow it might be worth it.
I have this DeWalt and it works great for the price....
I have a 6" Eskimo auger. It works great, just keep the blades sharp and covered if not in use. My Eskimo auger is attached to a DeWalt heavy-duty brush-less drill. I can drill countless holes through twelve inches plus of ice in about ten seconds. https://www.amazon.com/DEWALT-DCD985B-20-Volt-Lithium-2-Inch/dp/B007ML7EVI/ref=sr_1_9?ie=UTF8&qid=1541702599&sr=8-9&keywords=dewalt+hammer+drill+20v+brushless
Most guys use a Milwaukee Fuel drill, but I like having the compatibility with other DeWalt tools. Look on Craigslist for a used ice auger and have the blades sharpened or replaced. Bought mine for $20 and I happen to live down the street from one of the two places that sharpens auger blades in Michigan (Angler's Pointe). If you need auger blades sharpened in the future you may mail them to me and I'll mail them back once sharpened. Costs $5-10. Message me if your interested.
You might want to try something like like this. The more someone tries to pull up the tighter its supposed to wedge. If they want it bad enough they will get it. https://www.youtube.com/watch?v=IYIqoxsjsNE I would talk to someone who does concrete since you will need a hammer drill. A drill with regular bits will not work. You will just ruin the bits and waste your time. If you have a cordless drill/ hammer drill like this https://www.amazon.com/DEWALT-DCD985B-20-Volt-Lithium-2-Inch/dp/B007ML7EVI/ref=sr_1_2?s=power-hand-tools&ie=UTF8&qid=1518417647&sr=1-2&keywords=dewalt+hammer+drill you could to it yourself. Those drills take forever compared to an sds or sds max hammer drill. They also don't like bits over 1/2". They will work but the motor gets frakn hot. If you know someone with something like this https://www.amazon.com/DEWALT-D25263K-D-Handle-Rotary-Hammer/dp/B00VNBV2F2/ref=sr_1_1?s=hi&ie=UTF8&qid=1518417765&sr=1-1&keywords=dewalt+hammer+drill+sds or this https://www.amazon.com/DEWALT-D25601K-4-Inch-Combination-Hammer/dp/B00MAB8DHY/ref=sr_1_5?s=hi&ie=UTF8&qid=1518417765&sr=1-5&keywords=dewalt+hammer+drill+sds your golden.