Reddit reviews Nite Ize CamJam XT Aluminum Rope Tightener, Large Versatile Tie Down Cam Mechanism With Carabiner Clip + 500 LB Load Limit
We found 5 Reddit comments about Nite Ize CamJam XT Aluminum Rope Tightener, Large Versatile Tie Down Cam Mechanism With Carabiner Clip + 500 LB Load Limit. Here are the top ones, ranked by their Reddit score.
KNOT-FREE ROPE TIGHTENER - Tighten, tension, connect, and secure heavy loads with knot-free technology, by simply pulling your rope through the cam mechanism of a Nite Ize CamJam XT Aluminum Rope TightenerCOMBINATION CARABINER CLIP + CAM MECHANISM - Use the rugged aluminum carabiner to attach to a fixed end point like a D-Ring or fixed hookFITS ROPE SIZES UP TO 9.5MM | 3/8"WORKING LOAD LIMIT: 500 LB/227KG | BREAK STRENGTH: 1500 LB/680KGWARNING: not for use where disengagement could result in bodily injury or property damage. Not for climbingWORRY-FREE GUARANTEE - all Nite Ize products are backed by our Worry-Free GuaranteeIncluded Components: One Camjam
Something like this? https://www.amazon.com/gp/product/B00XVP9ZPM/ref=ox_sc_saved_title_6?smid=ATVPDKIKX0DER&psc=1
a smaller one for paracord: https://www.amazon.com/gp/product/B00KSKY0KS/ref=ox_sc_saved_title_6?smid=ATVPDKIKX0DER&th=1
I like it a lot. I had several requirements for an antenna
After hemming and hawing and Googling and reading eham reviews for what seemed like forever, I ultimately decided on the Titan.
Meets all my requirements. Mounted on a tilt base, I can have it up or down in a minute or two. No radial field required as it's a dipole, just vertical. No coils or traps to fuss with and it's a more efficient antenna as a result. Very good on 10-40, just so-so on 80. Has a nice low takeoff angle for working that sweet DX. Can be ground mounted, doesn't need an elevated mounting position for optimal performance.
It's holding up very well. Gap says it doesn't need to be guyed and will withstand substantial winds , but 60+mph winds are a routine occurrence here and it whips around a frightening amount, so I've devised a quick attach guying system for it with 3 guy lines that run down to some tent stakes in the yard with some camming rope tightners attached.
The not so good. I find the choice of sheet metal screws to hold everything together questionable. On the main mast, this is acceptable, as there's no access to attach a backing bolt anyway, but on all of the stub sections, I would have much preferred to see proper drilled holes with machine screws. To its credit, everything holds together just fine and nothing has loosened on me. I give everything a quick checkover once a month.
The copper wire that comes with it for the 40m hoop is awful stuff. It's stiff and prone to kinking and breaking. I swapped it out for some Flexweave wire and I'm very happy now.
Some more pics to give you a better idea of size. It's 25' tall and weight probably 25 pounds or so. It's a piece of cake to walk it up and down on the tilt mast.
https://imgur.com/a/vnyjj
These rope tighteners are awesome. They can only tighten until you release them. The release is mechanical I’ve never had an issue. Nite Ize CamJam XT Aluminum Rope Tightener, Large Versatile Tie Down Cam Mechanism With Carabiner Clip + 500 LB Load Limit https://www.amazon.com/dp/B00XVP9ZPM/ref=cm_sw_r_cp_api_i_oLnQCbWGD25BE
Just get a Nite Ize Camjam and don't worry about anything else. https://www.amazon.com/Nite-Ize-Aluminum-Tightener-Carabiner/dp/B00XVP9ZPM/ref=sr_1_13?ie=UTF8&qid=1496112801&sr=8-13&keywords=nite-ize+carabiner
I also like these.. easy to undo quick for learning
more(have not tried these, but i will have to now)
and
less