Reddit reviews OOK 55316 13-Piece Up to 200 Pound Hangman French Cleat with Hardware
We found 8 Reddit comments about OOK 55316 13-Piece Up to 200 Pound Hangman French Cleat with Hardware. Here are the top ones, ranked by their Reddit score.
Allows for level hanging every timeInterlocking brackets for safety and securityDurable mounting screws includedideal for wide variety of artSturdy design holds up to 200 pounds
Use a low-profile metal french cleat setup. If you can catch two studs with the cleat on the wall you'll be fine. Make the cleat on the wall a few inches short so you can adjust the vanity a bit either way to get it centered. You can drive a screw or two through the vanity to make sure it doesn't pop off the cleat.
There are even cleats for sale commercially: http://www.amazon.com/OOK-13-Piece-Hangman-French-Hardware/dp/B003WE9XU4/ref=sr_1_1?ie=UTF8&qid=1453132554&sr=8-1&keywords=wall+cleat
It'd take a routed cavity in the slab to make it flush mount, but yeah, eminently doable.
Nah. I thought the holes gave it a rustic look, and honestly I don’t notice them unless I’m looking really close. It is rather heavy. Maybe 50# or so, but I wanted the thickness to deter warping. If you go any thinner I feel like the wood would bow more over time.
I hung it up with a French cleat mount I got from amazon. Only $13! It’s very secure and does the job well.
French Cleat on Amazon
People should begin to sense a theme - They're from Ikea. I believe they are meant to be used vertically, but I mounted a french cleat to the back of both of them and attached them to the walls (make sure they're hitting at least 1 stud). I'm obviously not afraid of them falling down.
If you're looking for more inspiration, I clicked through a few thousand pictures on the lifehacker workspace flickr. I'm sure if you do they same, you'll find the spaces that inspired mine.
If you do come up with something - be sure to share it!
I have seen French Clete's used at work. They are really strong aren't going to vibrate. You can use one at the top of the speaker and one at the bottom. The one I am linking to at Amazon can be cut in half. The are also pretty available. Michael's craft store and wood working stores carry them.
OOK 55316 13-Piece Up to 200 Pound Hangman French Cleat with Hardware
https://www.amazon.com/dp/B003WE9XU4/ref=cm_sw_r_cp_api_PmBpxbZNV7ECG
No, I ended up using two brackets like this and managed to get it into a few studs. Foolishly, I bought a cheap piece of fiberboard as my backing, but it was insanely heavy and I was a bit worried about it falling down. So I went a bit overboard with the mount haha.
You could use a french cleat:
https://www.amazon.com/OOK-13-Piece-Hangman-French-Hardware/dp/B003WE9XU4
Here is how it works:
https://www.popularmechanics.com/home/how-to-plans/how-to/g2340/how-to-build-a-french-cleat-shelf/
Have you considered ook hooks and an aluminum French cleat tv mount? Ook’s heavy duty hooks are rated for 100lbs each and don’t require studs.
I know they don’t look like much, but I’ve hung heavy TVs and large mirrors with ook hooks for years with no issue.
For TVs I use the tv side of the mount from this: https://hangmanproducts.com/products/no-stud-tv-hanger?variant=286515704
And two of these: OOK 50446 4 Pack 100 Lb Padded Professional Picture Hanger, Brass https://www.amazon.com/dp/B01FM46Y9Y/ref=cm_sw_r_cp_api_i_Lr20Bb83CA54M
Apparently ook makes a French cleat now: OOK 55316 13-Piece Up to 200 Pound Hangman French Cleat with Hardware https://www.amazon.com/dp/B003WE9XU4/ref=cm_sw_r_cp_api_i_7n20BbP9PGMZX
EDIT: This assumes you always want the tv to be flat to the wall