Reddit reviews Rockford Fosgate R250X1 Prime 1-Channel Mono Block Amplifier

First, make sure to check all your resources before popping over to your local sound shop and letting them convince you to buy some overpriced shit.

Amazon and Ebay are your friends! Use crutchfield and sonicelectronix for info and standard pricing, then check Amazon/Ebay for the BIG discounts. Tell crutchfield or Amazon what you're driving and they'll give you a list of parts that fit.

Second, even with only listening to rock music, trust me you will want a small subwoofer to fill out your system. Nothing major, it doesn't have to blow your head off or anything. Just adds a little low end to balance out your sound.

So, if I were to build a decent budget system for your Ranger, this is what I'd do:

• Head unit (radio). Alpine, Pioneer, Kenwood, JVC are really the only brands I would consider. Here's a decent Pioneer for the money. ~ $68
  
  
• You'll also need a wiring harness for your aftermarket radio to work in your truck. Not a big deal. ~ $4
  
  
• Okay, speaker time. Crutchfield says your truck has 5 1/4" in the doors, 6 1/2" in the kick panels and some random speaker behind the seat. For our purposes, let's say you just disconnect the rear speaker as it will be completely unnecessary. Here are some Rockfords for the doors that won't break the bank. ~ $62 / And here's some 6 1/2" Alpines for the kick panels ~ $62
  
  
• Subwoofer. Okay, now you may reach this point and say, "You know, I'll be fine with just this! Listen to how much better it sounds!" Trust all of us, a woofer is a good investment. For your purposes, I've tried to leave some wiggle room as far as budget goes to allow for a decent sub, box, amp and amp kit. A lot of these people will say build your own box, and if you're handy and would like to try, then go for it! I'm just not as averse to prefab as most people around here, so I say just find a decent prefab wedge box that will fit behind your seat. A little browsing and Bam! box and woofer. That's perfect for you. ~ $109
  
  
• Amplifier. You don't need anything crazy. Keeping with the Rockford theme, here's a decent 250w amp for that sub. ~ $103
  
  
• Amp kit. ~ $33
  
  And the grand total is: ~ $441 ($196 without the stuff for the subwoofer)
  
  Now, obviously you can play around with the pieces of this system for preference and price, but this was just what I could throw together in 20 minutes or so. Research, research, research. Half of this game is finding parts you like and reading/forming opinions about brands, etc. Hope I helped.

This is a somewhat subjective question, so I will give my opinion.

Hear it yes... feel it... meh not really. Don't have too high of expectations.

If your sub is a dual 4 ohm voice coil this amp would be a good choice for optimal performance: http://www.amazon.com/gp/product/B00BF6HX8U?keywords=rockford%20fosgate%20250&qid=1452789936&ref_=sr_1_1&sr=8-1

I got a pair of these. Super cheap but surprisingly good. Originally intended to be temporary while I repaired the old ones, but after the break in I think they sound better than the old expensive ones.

Both in a ported box aimed up, pushed by this amp.

This RF amp will power one of those subs just fine. Wire your sub like this

Somebody linked you a alpine amp, which would work perfectly fine, this is just over your budget but a love the build quality of Rockford Fosgate much better. Dislike their subs but their amps are quality. I really dislike alpine subs, but their amps are decent as well if your running low power.

http://www.amazon.com/Rockford-Fosgate-R250X1-1-Channel-Amplifier/dp/B00BF6HX8U/ref=sr_1_1?ie=UTF8&qid=1463969240&sr=8-1&keywords=Rockford+fosgate+250

This is the amp I ordered and this is the sub. Since I first made this post, I was able to switch my order to get the 4Ω DVC version of the same sub. Now both will be running at 250W RMS, so it should all work out fine.

Thanks for the reply. that sucks about the budget, a lot of others found setups that were well within my constraints.

> First, make sure to check all your resources before popping over to your local sound shop and letting them convince you to buy some overpriced shit.

>Amazon and Ebay are your friends! Use crutchfield and sonicelectronix for info and standard >pricing, then check Amazon/Ebay for the BIG discounts. Tell crutchfield or Amazon what you're driving and they'll give you a list of parts that fit.

>Second, even with only listening to rock music, trust me you will want a small subwoofer to fill out your system. Nothing major, it doesn't have to blow your head >off or anything. Just adds a little low end to balance out your sound.

>So, if I were to build a decent budget system for your Ranger, this is what I'd do:

> Head unit (radio). Alpine, Pioneer, Kenwood, JVC are really the only brands I would consider. Here's a decent Pioneer for the money. ~ $68

> You'll also need a wiring harness for your aftermarket radio to work in your truck. Not a big deal. ~ $4

> Okay, speaker time. Crutchfield says your truck has 5 1/4" in the doors, 6 1/2" in the kick panels and some random speaker behind the seat. For our purposes, let's say you just disconnect the rear speaker as it will be completely unnecessary. Here are some Rockfords for the doors that won't break the bank. ~ $62 / And here's some 6 1/2" Alpines for the kick panels ~ $62

> Subwoofer. Okay, now you may reach this point and say, "You know, I'll be fine with just this! Listen to how much better it sounds!" Trust all of us, a woofer is a good investment. For your purposes, I've tried to leave some wiggle room as far as budget goes to allow for a decent sub, box, amp and amp kit. A lot of these people will say build your own box, and if you're handy and would like to try, then go for it! I'm just not as averse to prefab as most people around here, so I say just find a decent prefab wedge box that will fit behind your seat. A little browsing and Bam! box and woofer. That's perfect for you. ~ $109

> Amplifier. You don't need anything crazy. Keeping with the Rockford theme, here's a decent 250w amp for that sub. ~ $103

> Amp kit. ~ $33

>And the grand total is: ~ $441 ($196 without the stuff for the subwoofer)

>Now, obviously you can play around with the pieces of this system for preference and price, but this was just what I could throw together in 20 minutes or so. Research, research, research. Half of this game is finding parts you like and reading/forming opinions about brands, etc. Hope I helped.

and

>Oh I can answer this one easy. My first truck was Ranger.
>You can easily get a nice sound system going for cheap. Check out Crutchfield for getting equipment. They make >it dead simple to install most components.
>I recommend getting a CD player.head unit that has bluetooth and usb inputs. You can get a pioneer or kenwood for cheap. Or spend a little more for an Alpine.
>Replace the stock speakers with stock sized aftermarket ones. You don't even have to spend a lot of money. Honestly, you could get away with spending less than >$250 on the whole set up.
>You will have a solid system at this point. You can then research adding a sub for the bass.

>Here is some that fit your truck;

>Head Unit

>Door SPeakers

>Additional Rear Speakers - these will need boxes since there is no spot for installation.


>Total of about $220.

I'm sure there can be good setups found for my budget?

http://www.amazon.com/Rockford-Fosgate-R250X1-1-Channel-Amplifier/dp/B00BF6HX8U/ref=sr_1_1?ie=UTF8&qid=1462994649&sr=8-1&keywords=rockford+r250

This amp

That sib in the enclosure should work, but double check your behind the seats measurements.

http://www.amazon.com/KnuKonceptz-KCA-Complete-Gauge-Installation/dp/B0050I6KII

This wiring kit should work, you might have to trim it a bit and/or cut the length slightly to fit in your truck, but all that means is you can use ask that extra wire to do a big three! Menards sells some dope ass 8/6/4/2/0 terminals, they're silver and like five bucks for 2 but they are amazing. You can crimp them on with a bolt cutter (be gentle) and back fill with solder (electrical, not plumbing) to make secure connections. It's copper clad aluminum, so it poetically won't work well to upgrade to, say, 1000 watts, but for 300/500 it'll work.

Head unit is good.

I'm sure you did the research on the harness, but did you get a dash kit? You'll probably find it around the place you got the harness.

Same thing with door spekkers. Disconnect the rear pair though, you'll have better staging just using the front anyhow. In the future, you may wish to amp them, but for now they should be okay. Skip the kick panels, your probably not going to care much about the extra noise.

http://www.amazon.com/KnuKonceptz-Knoise-Kolossus-Deadener-100Mil/dp/B009KXF9MW

This sound deadener could make up for any missing volume I'm sure, but you probably won't need 30 sq ft, you might try they're 14 sq ft door kit. Make sure you clean the surfaces with alcohol and lint free towels first before applying it.

You could just skip that last one though, probably not worth it. .. but the Option is there.

So, in conclusion, measure, double check, triple check, then order.