Reddit reviews WD-40 Specialist Water Resistant Silicone Lubricant Spray, 11 oz.
We found 7 Reddit comments about WD-40 Specialist Water Resistant Silicone Lubricant Spray, 11 oz.. Here are the top ones, ranked by their Reddit score.
Silicone lubricant provides a protective, waterproof, and low-friction coating to surfacesQuick-drying formula cures into a clear, stain-resistant hard filmLubricant can be applied to metal, rubber, and plasticPermanently attached, hinged straw offers the option of a precision stream or fan-shaped sprayProtects a range of products, including cables, pulleys, valves, hinges, and locks
use a silicon spray lube like this and just soak down the control arm bushings. This fixed it for me but it needs to be re-applied about once a year.
I've had my car looked at in so many different ways. As part of my clutch install i told the mech to keep an eye out for anything loose because of this issue. The entire subframe had to get dropped and brand new hardware mounted it back in. All the suspension looked perfectly fine (note none of the hardware for the suspension was touched, just the subframe) and had absolutely 0 play. But the moment he drove it out of his garage for a test drive it creaked out of the parking lot.
So yeah, control arm bushings.
EDIT: But for a brand new car their reaction is kind of rude. Maybe talk to the person who sold you the car and explain and have them come for a quick drive to show them. Its hard to get a mechanic to take a drive with you to show them a problem without paying them a disgnostics fee a least or something
Nintendo joystick shafts go through a captured ball in the base which probably needs a thorough cleaning.
I would start by completely disassembling it and cleaning the entire base, especially the area around the ball. I use Brakleen to de-gunk them. Then after it dries, I use a silicone lubricant on all the metal mating surfaces.
I've become a big fan of WD-40 Silicone Spray. I've been lightly applying it on the tops of all the screws after the post-bash RC shower, and it keeps the rust away.
Pick up one of these for $13 and this for $5 and practice wherever whenever!
Since i have not seen anyone suggest this yet, WD-40 has a specialist silicone spray that is both plastic safe and dielectric. Hold down your trigger and spray a very small amount in the trigger hinge area.
Got rid of that same problem for me with no shipping.
This stuff ---> https://www.amazon.com/WD-40-Specialist-Resistant-Silicone-Lubricant/dp/B0083V8K0U
Aha "Stoddard Solvent" on the prop, then paint ... also known as Marvel Mystery Oil AKA Naptha ...
To summarize the the manual: Dip the plane in paint thinner, then wash with dish soap.
White spirit or mineral spirits, also known as mineral turpentine, turpentine substitute, petroleum spirits, solvent naphtha (petroleum), varsol, Stoddard solvent, or, generically, "paint thinner", is a petroleum-derived clear liquid used as a common organic solvent in painting and decorating.
WD-40 w/ silicone works nice on props to clean and make them pretty.
https://www.amazon.com/WD-40-Specialist-Resistant-Silicone-Lubricant/dp/B0083V8K0U/
You could use something like this http://www.amazon.com/WD-40-Specialist-Resistant-Silicone-Lubricant/dp/B0083V8K0U maybe. Silicone based lubricants are safe for plastics and squeaking is always some friction between the plastic parts.