Best bike seat posts according to redditors

OneUp dropper

PNW Ridge

There’s definitely options less than $200. Those are some examples. If you know what diameter and travel you need that will help.

I'm going to weigh in on stuff you will want and need no matter what bike you get as you start working into it and , you know, stretch your legs. IMHO, I would not go with a road bike with drop bars and skinny tires myself. I think 28mm tires are minimum deal for a 300 pounder.

I would probably go with 32mm or higher to start. Once you get under 250lbs maybe you can go to 28mm


YOUR HANDS WILL HURT

Good padded gloves ,

Better grips and if budget allows,

MUCH BETTER GRIPS


BACK AND NECK WILL HURT


If you have back/neck problems a adjustable stem like this to raise your bar 20-50mm may be a good idea.

I went with a bmx type handlebar and got away from the flat bar pretty fast I'm 45 and my back is fucked up.

YOUR ASS WILL HURT

Padded undershorts usually is enough
If not - Better seat and if necessary - a suspension type seatpost.

Hope this helps.

Highly recommend. I have this one. Love it. Have a hard tail fatbike.

https://www.amazon.com/Suntour-SP12-NCX-Mountain-Suspension-Seatpost/dp/B01BIX1XLW

I just got one on Amazon for $130 from DNM (I think). It has its problems, but from what I can tell it holds up fine. Havnt taken it out on tough trails yet, but it feels fine and moves pretty fluidly. The only issue I have is that the cable connects at the seat, meaning that if installed funky it might change tension when down. I fixed this by adjusting it, but it's kinda a pain. Get what you pay for I suppose. I am content with this purchase simply because I'm about to buy an enduro FS and installed this on my XC hardtail. Because it's not critical, I don't mind the cheaper quality.

DNM Mountain Bike Dropper Seatpost Remote Lockout 30.9x330mm https://www.amazon.com/dp/B00K2PFE9K/ref=cm_sw_r_cp_apap_DuVv7Dgq8IaFy

What are you looking for?

I definitely recommend a suspension seat post for more comfort.
https://www.amazon.com/dp/B01BIQN9UC/ref=cm_sw_r_cp_api_i_0dKcBb0HND9Z2

I also put a ram mount on mine so I can have my phone on the bars for gps. Makes it easy to connect to the USB port too.

I added a second usb rechargeable led headlight along with a rechargeable tail.
https://www.amazon.com/dp/B077CZK75L/ref=cm_sw_r_cp_api_i_9eKcBbC7DX9KQ

And lastly, I put on some cheap plastic moto hand guards to protect my hands since I trail ride it often.
https://www.amazon.com/dp/B073P3JH7F/ref=cm_sw_r_cp_api_i_bcKcBbM524YT5

This also fits nice in the nook behind the battery
https://www.amazon.com/dp/B00ZP3ADU4/ref=cm_sw_r_cp_api_i_jdKcBbED6PRMF

picked up a satori animaris for $55 on amazon. it's amazing for the price, very well built and made my ride 1000% more comfortable. comes in all diameter sizes, one i linked is the 30.9mm version, other listings for 27mm etc.

Save a bunch of money and get a better seatpost with the Suntour NCX. I've ridden just about every suspension seatpost out there, including the Thudbuster, and this is BY FAR my favorite. Just need to be sure to dial in the preload based on your weight and riding style, it works like a dream after that.

https://www.amazon.com/Suntour-SP12-NCX-Mountain-Suspension-Seatpost/dp/B01BIX1XLW

https://www.amazon.com/DNM-Mountain-Bicycle-Seatpost-31-6x330mm/dp/B00K2PFH5Q/ref=pd_lpo_vtph_468_bs_t_2?_encoding=UTF8&psc=1&refRID=HJJBTTJSNH0D92HW0R6R

DNM for the money has good reviews and i know Seth bike hacks use one.

DNM is the brand, they sell a lot of stuff through Amazon.

https://www.amazon.com/DNM-Mountain-Dropper-Seatpost-30-9x330mm/dp/B00K2PFE9K/ref=sr_1_1?ie=UTF8&qid=1502993328&sr=8-1&keywords=dnm+dropper

Both me and my friend have one, bought around the same time. Both have had no issues (needed a bit of lubrication of the lever) since last winter... probably >1,500 miles between the two.

http://amzn.com/B00IOWYWHS

Not sure about that particular dropper, but there are a couple other good, relatively cheap options:

DNM Asp-R - Got this for my Trance; poor quality switch, but 100% happy with the post's build quality and performance.

KS eTen - I've seen a number of these hold up really well.

Slightly better prices for both are available elsewhere online.

Lots of us, myself included, have droppers on our hardtails.

It's a great thing to have, I won't go back to fixed.

DNM makes a very inexpensive model that has a remote release and can be stopped at any height. I'm extremely hard on my gear, and it's working perfectly fine after a season of abuse, so I'd say it's a great value compared to the other higher priced options.

I use this one:

DNM Mountain Bike Dropper Seatpost Remote Lockout 30.9x330mm https://www.amazon.com/dp/B00BW4T5WW/ref=cm_sw_r_cp_awd_NgeRwb648F1DH

It is awesome for the price but does not route internally.

Not sure of your price range or overall drop your looking for, but I can say the dnm dropper post is excellent for the money. Myself and a buddy both have it on our bikes and they have been running great for over a year. I know it's not from a major manufacture, but it's a solid product.

DNM Mountain Bike Dropper Seatpost Remote Lockout 30.9x330mm https://www.amazon.com/dp/B00BW4T5WW/ref=cm_sw_r_cp_api_iiJjzbF6KJS5C

Rather than saddles, think of the seat post. They get great reviews.

Im tossing up between these ones, and cant decide which is better for eBikes:

Thudbuster

https://www.amazon.com/gp/product/B01BIQN9UC/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=A1C9T7ACO5T769

and

Suntour

https://www.amazon.com/gp/product/B000T3BYH6/ref=ox_sc_sfl_title_3?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

I have the CCX and another brand's fat tire bike. I'd recommend you go with the CCX, because it's going to be easier to ride when the battery runs out, and sometimes fat tires can be an inconvenience otherwise. Someone mention fitting into a bus rack, for example. I also think fat bikes attract more attention, though they're both still expensive-looking ebikes of course.

Another thing the CCX has going for it is the tires. Though fat tires are generally more resistant to flats in general, the Schwalbe Marathon Plus are known for being among the most flat-resistant tires you can buy. The kendas on the RCS might be good too, but they don't have the same proven reputation.

If you're concerned about a rough ride, get a suspension seatpost.
I'm using the Satori Animaris, which works incredibly well for just $60 (there's a slightly different looking model online too, not sure if it's a newer model). It seems to not be as bouncy as other suspension seatposts, but I like how you don't really notice it when pedaling until you need it. Not sure I'd want any more suspension for city use. Works great in rough NYC streets, and is the best purchase I've made for my bikes.

For me Cane Creek thudbuster is the only way to go. It's not cheap but feels great. https://www.amazon.com/gp/aw/d/B002CVBJDM/ref=mp_s_a_1_3?ie=UTF8&qid=1487899699&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=thudbuster%2Bseatpost%2B27.2&th=1&psc=1

I ordered a lot of my parts from amazon. Here's a link. Really cheap and super long, the only thing is it came with a cheesy logo printed on the sides, but a bit of fine steel wool took it off in a couple minutes.

I know this sucks, but it's an easy/cheap replacement: post (assuming that went) and saddle. Post is fine quality (verify size) and the saddle is damn good for the money. Total should break $25 for free shipping. Wrench it yourself (easy if you have allen keys) or a shop can do it for less than $15.

I suspect it's mostly done with the "try a bunch of seatposts" method because the sizing tool is surprisingly expensive. https://www.amazon.com/Stein-Seatpost-Sizing-Rods-Pair/dp/B001GSMF94

2 other things I currently have that I love and will always add to whatever bike I own. These images are off the Amazon site but you can find them locally or elsewhere.

Folding metal pannier

Thudbuster suspension seatpost

https://www.amazon.com/Kalloy-Uno-350mm-Alloy-Seatpost/dp/B07RZMP27X/

$17 for the 27.2mm version. It will tilt, and fit in your bike.

If you're already using it to commute that short of a distance I'd recommend a small 250W-500W hub, like the Golden Motor Smart Pie and a small (<10Ah) 52V battery. The Smart Pie only weighs ~12lbs, and the controller is built into the hub which simplifies installation. It'll basically make the trip faster and hills easier without drastically altering the character of the bike, or raising your speeds to the point of being dangerous without suspension and disc brakes. I would also consider at least 1.5" wide tires to reduce the chance of breaking spokes and a suspension seat post to mitigate the impact of bumps at higher speeds.

Right? Anytime on a climb when my quads burst into flame..I know my saddle needs to go up.

If your budget is tight this dropper post is simple and cheap. Cables are better of course, and more expensive ones are lighter but it's solid.

I share your pain with regard to the angry drivers. It doesn't matter how fast you're going, in my experience, most drivers equate 'bicycle' with 'slow', and slow = road rage.

For the rough bike lanes though, have you considered switching to a suspension seatpost? Preferably something nice like a Thudbuster or NCX, but I rode with a cheapo telescoping seatpost for over a year, and even that is a massive comfort improvement over a normal rigid seatpost.

I would also consider lowering the tire pressure a bit, but not too much, since you don't want to risk getting pinch flats.

FWIW I’ve been super happy with this dropper that’s now selling for under $150. No problems whatsoever. I’ve had it about a year and have not added air since the first install.

https://www.amazon.com/gp/product/B00K2PFH5Q

I used this one https://www.amazon.com/gp/product/B00K2PFH5Q/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
and have been happy with it so far.

For a hardtail, with a lot of rocks and loose dirt/dust/sand, I would say that "plus" tires are the way to go. I think 27.5+ wheels/tires are better than 29+ because with 29+ feel so big, I think you lose some handling agility.

What Does it all Mean? 27.5+ and 29+ Bikes
Your guide to the fattening
https://www.bikemag.com/gear/mean-27-plus-29-plus-bikes/

Check out this Kona:
https://www.jensonusa.com/Kona-Big-Kahuna-Bike-2018

As far as L or XL on the Kona, it's sort of depends how much you want to reach forward, since you can always run a taller seatpost. Even a long dropper post, like a 170mm. I just got one of these for my hardtail, although I haven't tried it yet.
https://www.amazon.com/PNW-Components-Cascade-External-Warranty/dp/B07GY1QSW6/ref=sr_1_1_sspa?ie=UTF8&qid=1550166168&sr=8-1-spons&keywords=pnw+cascade+170&psc=1

Taller handlebars will also help a long bike feel not as long, because you're not leaned forward and down as much. Here are 3 inch rise handlebars that I personally think would go great on the Kona.
https://www.universalcycles.com/shopping/product_details.php?id=51573&gclid=EAIaIQobChMI7pCsneO74AIVmh-tBh0rBw5JEAQYASABEgIKDPD_BwE

https://www.amazon.com/dp/B07MC2P8XN/ref=cm_sw_r_cp_tai_W2gEDbEEC6GG7

I’ve known a few buddies that have rocked this with no issues (looks like a 3 year warranty as well). I personally haven’t used it, as my bike came with a KS. Don’t get one that uses hydraulic fluid in the cable, less maintenance.

Have you looked on Craigslist?

I had one of these. Worked Great. Not the same, but same price range and functionality.

I don't know about the quality of this particular seat post, but this style of clamp, with an adjustment bolt in front and back, is great. If you use this style of clamp, your saddle will not move.

Origin8 Pro-Fit Alloy Seat Post, 27.2 x 400mm, Black https://www.amazon.com/dp/B000AO9NBS/ref=cm_sw_r_cp_api_ZIgvxbZNGSSB2

You'd have to choose the size that matches your existing post.

If you need something cheaper, you can purchase a new saddle clamp like the one you have for about $7 on Amazon. Maybe it's cheaper elsewhere.

Another thing to consider is whether you're using the clamp you have, correctly. Are the teeth worn smooth on your clamp? If they are, a new clamp like the one you have might solve your problem.

If the teeth are still there, I bet you are putting the saddle too far forward or too far back in the clamp. If your weight is centered over the clamp, it should work ok. Big bumps might make it move, but it should stay still for normal riding.

Thoughts on this one? I've been looking at it.

http://www.amazon.com/gp/aw/d/B00BW4T5WW/ref=mp_s_a_1_1?qid=1415320007&sr=8-1&pi=SY200_QL40

Any thoughts on this one or know anyone that runs it? dnm dropper

I have a CAAD8 and am looking to do the same - reuse for same purposes. Is the Fast Forward Seatpost this thing - http://www.amazon.com/Profile-Design-Fast-Forward-Seatpost/dp/B005FENC4M ?? So you pull your post, and put this on? And move your saddle to this too? Which aerobars did you get, too?

http://www.amazon.com/Profile-Design-Fast-Forward-Seatpost/dp/B005FENC4M

• Get a shock post
  
• Get the largest road tires you can find that will fit the bike. You should also be able to lower the pressure with bigger tires.
  
• Get a gel seat, preferably with springs, or a gel seat cover.
  
• Raise the stem (replace if necessary)
  
  Make sure the bike fits you and you're riding properly:
  
  
• Your seat should be level (not sloped)
  
• When pedaling your knees should be bent by about 30 degrees at the bottom of the stroke.
  
• The handle bar should block your view of the front hub (or come close). A raised stem might change this.
  
• The pedal should be in contact with the ball of your foot
  
• Keep your elbows slightly bent. Locked elbows will transfer road shock to your back.
  
• Your cadence should be 60-90 rpm.
  
  But, really, a road bike is probably the worst type of bike you could be using.

>Hey /r/bicycling,
>
>My wife has been biking more and more with me lately, but hasn't seemed to adjust to the saddle the same way I seemed to. She's fine while riding, but anytime there's a sharp bump -- large crack in the pavement, uneven curb landing, etc. -- she either has to stand up on the pedals for a bit, or experiences a good bit of pain.
>
>She has bike shorts that she wears sometimes, and while they help with general discomfort on long rides, they seem to do nothing for the hard bumps we hit.
>
>I've been looking at 2 different solutions:
>
> New Saddle. Currently eyeing a Brooks Cambium C17 Carved for her based on reviews.
> Suspension Seatpost: Cane Creek Thudbuster Seatpost has great reviews for softening the sharp shocks transmitted to you.
>
>Other recommendations welcome! She is currently using the default seat and post that come with a specialized Vita. Both of these options are already a bit more expensive than I'd like, but I want something that works well and lasts. I definitely don't want to splurge and get both. . .

I would recommend consulting your local bike shop. There are many possible sizes for a seat post, and getting it wrong could lead to problems. A bike shop will have a seat post sizing rod to measure it, something like this.

They're legit if you get one that is purchased and adjusted properly for your body weight. You need a decent quality one though, which are more expensive than you'd think.

https://www.amazon.com/Cane-Creek-Thudbuster-Travel-Seatpost/dp/B000T3BYH6/

Check the reviews on that.

Also check the Cane Creek product page: https://www.canecreek.com/product/thudbuster-lt/. You'll note that it might be necessary to purchase additional elastomers, depending upon your weight.

They work, you just can't expect enduro suspension out of a seat post :)

So the Thudbuster?

That was my thought making this thread. I guess I just don't know what is involved in selecting a "regular" seat post. Maybe this one will work? https://www.amazon.com/Origin8-Pro-Fit-Alloy-Seat-Post/dp/B000AO9NBS I'll measure the existing post and figure out which one to buy.

You should grab a thudbuster suspension seatpost or for 60 bucks these are pretty good. https://www.amazon.com/dp/B071YLB5CN/ref=cm_sw_r_cp_apa_i_3-1ODbMG4JGNZ