Reddit reviews Cmple - Low Voltage Mounting Bracket 1 Gang Multipurpose Drywall Mounting Wall Plate Bracket – Single Gang
We found 6 Reddit comments about Cmple - Low Voltage Mounting Bracket 1 Gang Multipurpose Drywall Mounting Wall Plate Bracket – Single Gang. Here are the top ones, ranked by their Reddit score.
SINGLE-GANG Low Voltage Backless Old Work Bracket- Designed for low-voltage devices in an existing wallEASY TO INSTALL - Fully adjustable, ideal solution for mounting low voltage wires (phone, internet, TV, video)ADJUSTS TO FIT various wall thickness, the bracket wings secure when mounting screws are tightenedPVC CONSTRUCTION for durable performance. Installs vertically or horizontally. Lifetime WarrantyPACKAGE INCLUDE: 1 x Single Gang Low Voltage Bracket, Mounting Screws Included
If you are looking to do this yourself you need a combination of the following:
DataComm 45-0001-WH 1-Gang Recessed Low Voltage Cable Plate (White) https://www.amazon.com/dp/B00193U3O0/ref=cm_sw_r_cp_api_VF7EzbAP6DKCZ)
If you are just going to mount the monitors right in front of your desk and don't need to go sideways like OP then you can just cut the drywall where you are going to mount the monitors and then go down to where your exit point will be and cut there and drop your wires through.
If you need to do some fancy stuff - Ideally you would want to see if where all your studs were, measure the distance you'll need to bore through studs and then get glow rods and flex bits with sufficient length to do the job. Also your flex bit will need to be a big enough diameter to fit your cables through. Flex bits are super easy to work with.
Hope this helps!
$150-180 +Tax (if Prime) to DIY
You need a spool of cat 5e/6, 6 Keystone jacks, 3+ Faceplates, some single and double gang brackets and a few cheap tools.
The brackets are what goes into the dry wall so the face plates have something to screw into.
Single / Double Gang is the size of the bracket.
Single gand = the size of a box for 1 outlet.
Double Gang = The size of a box for 2 outlets (side by side)
Tools: https://www.amazon.com/Zoostliss-Portable-Ethernet-Crimping-Detector/dp/B01JU2XERY/ref=sr_1_27?ie=UTF8&qid=1497913897&sr=8-27&keywords=cat+5+punch+down
Cable: https://www.amazon.com/Ethernet-Cable-000ft-Cat-6-VIVO/dp/B0092TK2U8/ref=sr_1_2?s=pc&rps=1&ie=UTF8&qid=1497914001&sr=1-2&keywords=1000+ft+cat6&refinements=p_85%3A2470955011
Keystones: https://www.amazon.com/Cable-Matters-25-Pack-Keystone-Punch-Down/dp/B004D5PFGW/ref=sr_1_2?ie=UTF8&qid=1497914060&sr=8-2&keywords=cat+6+keystone+jack
FacePlates (Dual): https://www.amazon.com/Mediabridge-Keystone-Plate-2-Port-White/dp/B0722K3K8R/ref=sr_1_12?ie=UTF8&qid=1497914110&sr=8-12&keywords=keystone+faceplates
Note* You are going to be under the house or in the attic. The work sucks but its way worse going in there for a 2nd time to run 1 extra wire... do yourself a favor... if you are running 1 length to a room.... run 2.
Faceplates (Double Gang): https://www.amazon.com/Port-Keystone-Faceplate-Dual-White/dp/B004FUWY3C/ref=sr_1_7?ie=UTF8&qid=1497914196&sr=8-7&keywords=keystone+faceplates
Low Voltage Bracket (Double Gang): https://www.amazon.com/Cmple-Low-Voltage-Bracket-Dual-Gang/dp/B003ZWHK6C/ref=sr_1_2?ie=UTF8&qid=1497914233&sr=8-2&keywords=double+gang+low+voltage+wall+plate
[BUY 3 of these] Low Voltage Bracket (Single Gang): https://www.amazon.com/Cmple-Low-Voltage-Bracket-Dual-Gang/dp/B003ZWJGGE/ref=sr_1_2?ie=UTF8&qid=1497914233&sr=8-2&keywords=double%2Bgang%2Blow%2Bvoltage%2Bwall%2Bplate&th=1
[EXTRA]
This is not necessary but super helpful for drilling through studs you cants see. Also keeps you from cutting more holes in the drywall than necessary. If you are done drilling holes, sell it on Craigslist for @ afterwards.
Stud Drill Bit: https://www.amazon.com/gp/product/B00LLGT4GI/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I would do something similar to what u/bdjookemgood said. The low voltage available here, and if you wanted were set on the condiut. But you don't need it all, you're just fishing some electrical, hdmi, and whatever else you need for your tv to function. I've used an extension cord to extend the electrical into the wall if the tv's power cable isnt long enough. One last tip I've done. Use these to give it a more finished look instead of just the holes in the wall. But all in all its a pretty simple idea.
Absolutely. Drill a hole alongside the phone cable (carefully) and tie a nail to a string to drop it down thru the partition. Once you have the string in hand, tie it to the cable and pull (either down from the attic or up from the room). Cut a hole in the wall below and use a "low voltage" bracket (like this: https://smile.amazon.com/gp/product/B003ZWJGGE/ref=oh_aui_search_detailpage?ie=UTF8&psc=1) to hold the faceplate for the coax connection.
You would be better served to run a ethernet cable from the router (in the office) to your room. If you wanted, you could put a new wifi AP there. BUt still you should have a hard line.
Most people complain about how it cant be done, but if you or your folks own the home, believe me it can be done... do you have a basement, crawlspace or an attic? If the answer to any of those quetions is yes, then that is how you run the wire (in that order of easy-ness).
Get one of these
https://www.amazon.com/Low-Voltage-Bracket-Single-Gang/dp/B003ZWJGGE/ref=sr_1_2?ie=UTF8&qid=1500570873&sr=8-2&keywords=low+voltage+wall+box
then fish the wire either down to the basement or crawl space (or up to the attic), then run across to your room. Install another one, then fish the line down.
Then get one of these for each
https://www.amazon.com/Black-Point-Products-BT-192-White/dp/B005MPVVMY/ref=sr_1_6?ie=UTF8&qid=1500570949&sr=8-6&keywords=low+voltage+wall+plate+cat5
along with
https://www.amazon.com/iMBAPrice-Female-Keystone-Coupler-IMBA-C6KC-WT-1PK/dp/B00BJP0LUE/ref=pd_sim_60_5?_encoding=UTF8&pd_rd_i=B00BJP0LUE&pd_rd_r=BW6284QVMSACA9647P97&pd_rd_w=gs2Vt&pd_rd_wg=Kjepz&psc=1&refRID=BW6284QVMSACA9647P97
use quad shield cat5e or cat6 cable and you will be good to go.
Dry wall mount is fine.
That's how most of mine are mounted.
Cmple - Low Voltage Mounting Bracket 1 Gang Multipurpose Drywall Mounting Wall Plate Bracket - Single Gang https://www.amazon.com/dp/B003ZWJGGE/ref=cm_sw_r_cp_apa_i_os8kDbM48D2BV