Reddit reviews Home Audio Power Amplifier System 2X40W Mini Dual Channel Sound Stereo Receiver Box w/ LED For Amplified Speakers, CD Player, Theater via 3.5mm RCA for Studio, Home Use Pyle PCA2

I use one of these http://www.amazon.com/gp/product/B001P2VV50/ref=wms_ohs_product

I have one of these, but only because I couldn't find a decent T-amp for a reasonable price at the time. It's a solid little amp; does what it says on the package. I have it driving a pair of Panasonic SB-L50s and it does a good job.

I'd go with the one wankerschnitzel recommended were I buying now, though. I've heard very good things about T-amps.

It doesn't have any strength because you aren't driving it with any real power. As harrywhite1 has stated your best option is to buy a cheap 10-30 watt amp. Personally I like my amps to be rated higher than my speakers and judge safety off of sound but that is just me. Just make sure it has a 8 ohm out or lower.

We use a ton of these at work and they are pretty solid for the price.

http://www.amazon.com/Pyle-PCA2-2X40-Watt-Stereo-Amplifier/dp/B001P2VV50#

If you are looking for a schematic just for the fun of building expect to pay more on average.

Here's one for ~$36. You'd have a hard time building the same thing for $36.

Would I be better off with a really basic receiver? I was hoping to get something that would have an aux input and bass/treble controls but all I have found was this: www.amazon.com/gp/aw/d/B001P2VV50/ref=ox_sc_act_image_3?ie=UTF8&m=ATVPDKIKX0DER but it doesn't provide enough power and the reviews say its description isn't accurate. I really need something to provide power (50-100w), have an aux/USB input, and basic volume/bass/treb controls.

I was in a similar predicament and fairly confused by what was needed and the terminology, so if you want input from someone who was coming at this as a novice, here you go. You basically need something to power the speakers and something to provide the audio signal. Those can be combined in a single device (like a big receiver) or separate (like an amp for power and a Chromecast audio for audio signal, which is what I wound up doing). I was just try to get two outdoor speakers to sync up with an indoor sound bar, so I was able to power the outdoor speakers with this

https://www.amazon.com/gp/aw/d/B001P2VV50/ref=yo_ii_img?ie=UTF8&psc=1

and then use two Chromecast audio for the syncing. It got me Sonos like functionality for under $100 all in and is pretty small footprint. I didn't want a big receiver sitting where the gear would need to go.

Your situation is complicated by having 6 speakers. Do the wires for all of them terminate in the same place? If so, you might just need to go with a full receiver. I looked into small form factor receivers, and they're out there but still pretty big and run around $500.

Give us some specs on the speakers. How many inputs do you want on the amp?

I'm a fan of the new digital amps (aka T-Amps, because they are considered class T) for inexpensive < 100WPC amps. Many are sold on Amazon.

Here is a 20WPC that looks nice: http://www.amazon.com/LP-2020A-Lepai-Tripath-Class-T-Amplifier/dp/B0049P6OTI/ref=sr_1_1?ie=UTF8&qid=1348156639&sr=8-1&keywords=t-amp

Here is a 40WPC: http://www.amazon.com/Pyle-PCA2-80-Watt-Stereo-Amplifier/dp/B001P2VV50/ref=sr_1_4?ie=UTF8&qid=1348156639&sr=8-4&keywords=t-amp

And here is a 50WPC that looks like it's got a little better build quality: http://www.amazon.com/Dayton-DTA-100a-Class-T-Digital-Amplifier/dp/B004JK8BDK/ref=sr_1_5?ie=UTF8&qid=1348156639&sr=8-5&keywords=t-amp

I'd say the cheapest option would be to scour amazon for cheap, entry level gear. If you search phono preamp some solutions would show up. As far as amps go, [here is a relatively inexpensive] (http://www.amazon.com/dp/B001P2VV50/ref=asc_df_B001P2VV502188142?smid=ATVPDKIKX0DER&tag=cnet-ce-20&linkCode=asn&creative=395093&creativeASIN=B001P2VV50) one to start off with. Please note I am not recommending this specific one, though it does have some good reviews. I am just using it as an example as to what you could look for as far as low power amps for a turntable. Needledoctor.com will have a lot amps too but most of them are pricey. I like looking here because it gives you an idea of what is out there.

Your second option would be to look for used vintage receivers in good condition. Search your thrift stores, pawn shops, consignment shops, garage sales, craigslist posts, etc.

To start off with, here are a few things to read to get you started:

• The Vinyl Guide
  
• The Cheap Setup Thread
  
  Basically you don't want a turntable that has anything built in like speakers or a pre-amp. These are added at the expense of quality components. You will need an amp, and possibly a pre-amp if the amp you get does not have a phono input on it already. When buying a turntable, you might as well get something nice, because the upgrade itch comes hard and fast. If you already have speakers, I would recommend just using those for now. Remember though, speakers are probably the most important part of your sound chain. I would recommend keeping an eye on craigslist for something awesome. No rush, but pounce if you happen on a deal.
  
  As to what amps do. Turntables output at a very low volume. The pre-amp boosts the volume and equalizes the sound to a "line-in" level. Basically, the same output that a CD player would do. After that, you need to boost the volume to a listenable level. This is what a regular amplifier does. In order of importance, a good pre-amp can work wonders. As for regular amps, they are one of the least important parts of your signal chain as long as it isn't absolute shit and can drive your speakers. They are just boosting volume.
  
  For maintenance, there isn't too much once you get it set up and playing. Change the stylus when needed is pretty much it. Maybe the occasional lubrication once every year or two, but I've been fine so far. The only maintenance I could really think of you having to do would possibly be to spray some Deoxit if something isn't working quite like it should, but that isn't a problem. A quick search will get you taken care of there.
  
  In Myrtle Beach, this Toshiba might not be too bad, especially if you could get it for $65 instead of $75.
  
  Back home, this Pioneer PL-4 would be a nice buy as well for around $50. It also doesn't say Technics in the listing, but here is a Technics SL-1950 for $100.
  
  Considering everything works as it should, I would get the Technics SL-1950. It has more documentation on the internet, and a much better chance of help from people familiar with Technics if you have any questions. See if you can haggle to around $85-$90, but it is still probably worth the $100 if they won't budge. Note that any used turntable you buy should probably have the needle replaced as well.
  
  As for an amp and receiver, I would recommend getting something from the 70's with a silver face by Japanese companies that you have heard the names of before. Marantz, Yamaha, JVC, Pioneer, Sansui, Kenwood, etc. all made some excellent receivers. Here are a few examples of the look I am talking about. These will last a lifetime and will rock most anything you put into them. Unfortunately, with your budget and location I didn't see anything that will fit the bill.
  
  Until then, I recommend you rock something like this pre-amp for $15, and this amp for $36. Start saving and then cruise craigslist, flea markets, and antique malls for one of those vintage beasts.
  
  Holy shit, I just realized I sent a wall of text your way. I think that will get you headed in the right direction though.
  
  tl;dr: This turntable, this pre-amp, and this amp, is right at $150, and possibly less depending on your negotiating skills. Use the speakers you have for now. Buy a new needle for whatever deck you get.

Would this work a little better for my speakers?

Just to let you know earphone jacks can only output just so much power and if you try to pull too much of a load from the earphone jack "amp" then you risk the chance of burning out the jack. So depending on how these stereo speakers are made, they might try to draw too many amps OR there won't be enough power from the earphone jack to run the speakers.

If you really want to use old stereo speakers on your computer, then you should really get an external speaker amplifier such as: https://smile.amazon.com/Home-Audio-Power-Amplifier-System/dp/B001P2VV50/ref=sr_1_6?keywords=external+computer+speaker+amp&qid=1555797586&s=gateway&sr=8-6

If you're really on a budget, try the thrift store route for speakers, and use them with a cheap amplifier.

You'll have to look around, but you could probably buy some decent older speakers for $50 for a pair. Use them with something like this, and you'll have loads of sound for less than $100.

This is simple, but might not do your Klipsch speakers justice.

New to this! I recently got this big ass speaker for free while moving, and I'm trying to get it set up. Problem is that I don't have any idea what I'm doing. I also have no details about the speaker itself in terms of impedance or really anything.

I'm pretty sure I need a power amp (like this?) to power it (connected using standard speaker wire and maybe banana plugs), and I'm also wondering if I should get something like this Monoprice hybrid tube amp to serve as a preamp.

Am I on the right track?

https://www.amazon.com/dp/B001P2VV50/ref=cm_sw_r_cp_dp_T2_1FyCzbGA15YRP

31 bucks and you're golden.

Something like this is what you want. Then you'll need a 3.5mm to RCA cable and you're golden. Even [cheaper alternative] (http://www.amazon.com/gp/aw/d/B0146LFVSE/ref=mp_s_a_1_1?qid=1458969825&sr=8-1&pi=SY200_QL40&keywords=mini+amplifier&dpPl=1&dpID=51-m4ORJqQL&ref=plSrch). Hope I helped :)

I'm a totally new to this, and I need some help!

I have two speakers that came with this RCA stereo I got for Christmas forever ago. I've been using the speakers along with the middle part for TV speakers (using the headphones output jack, and a L/R audio input), but I want to replace it with just an amplifier. I'm not sure what my best decision is.

The speakers are:
Impedance 6Ω
Rated Power 40W

After trying to figure everything out, I thought that this Pyle 2x40W is what I would want, but the reviews are very mixed and I'm not sure I want to waste my money on it.

I thought that I would sacrifice the max output and settle with this Lepai 2x20w that has really good reviews.

Is this a good choice? Is there a good 2x40w amp that I missed?
Some help would be greatly appreciated!

Home Audio Power Amplifier System - 2X40W Mini Portable Dual Channel Surround Sound Stereo Receiver Box w/ LED - For Amplified Subwoofer Speakers, CD DVD Player, Theater via 3.5mm RCA - Pyle PCA2 https://www.amazon.com/dp/B001P2VV50/ref=cm_sw_r_cp_apa_CtA5BbJ330NKY

Is what I got.

Shit. See this is what I need to know. Someone on Amazon suggested this amp. Thank you for the information. I'll replace it. Will forty watt amp work? Like this one